Question about 2004 kawasaki Vulcan 1500 Nomad

1 Answer

2001 kawsaki 1500 vulcan nomad gets hot and jumps from 1st to 3rd back to neutral

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • kawasaki Master
  • 39,890 Answers

Hi, Leonard and the usual suspects are:
1. Shifter pawl improperly adjusted.
2. Shifter drum improperly adjusted or damaged.
3. Shifter engaging parts/dogs badly worn or rounded.
4. Shifter forks bent.
5. Damaged gears.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Neutral problem Vulcan Bagger Forums
2nd slipping into neutral kinda
Kawasaki VN1500 MEAN STREAK Service Manual
OEM Parts for Kawasaki
2001 Kawasaki Vulcan 1500 Nomad Fi Owner Manual

Posted on May 05, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Kawasaki Vulcan Nomad 1500 clutch lever is sticking


Hi, Daniel for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch is stuck Vulcan Bagger Forums
Kawasaki vulcan clutch issue
How to bleed hydraulic clutch on motorcycle in an extreme case of air...
Kawasaki VN1500 Service Manual
OEM Parts for Kawasaki
2003 Kawasaki Vulcan 1500 Nomad Fi Owner Manual

Jul 15, 2017 | 2004 kawasaki Vulcan 1500 Nomad

1 Answer

How to bypass ignition on a 2001 kawasaki vulcan 1500


Ignition switch broken, 5 wire. - Kawasaki Vulcan Forum : Vulcan ...

www.vulcanforums.com/...vulcan.../20362-ignition-switch-broken-5-wir...
Sep 26, 2011 - I have a 2001 Kawasaki Vulcan en500/ While doing some detailing i broke the ignition switch. I need the bike to run to get it moved to a friends. nomad wont start - Page 2
Sep 9, 2015
No Spark
Sep 19, 2012
Project VN1500 Vulcan, you might cringe
Apr 14, 2010
No Spark 2000 Nomad Fixed
Feb 21, 2009
More results from www.vulcanforums.com

How to hotwire a motorcycle - YouTube

? 1:22
www.youtube.com/watch?v=JRD58qqmRWE

Aug 20, 2010 - Uploaded by mrmaxstorey
I have a 2005 Kawasaki Ninja I'm trying to hotwire does this method .... Do you have any suggestions on how to unlock/"on" the ignition on a ..

Nov 02, 2015 | kawasaki VN 1500 Vulcan Classic...

1 Answer

My 2004 1500 Vulcan Nomad will not stay in gear 2nd thru 4th gears? It started off as a momentary thing where when I went from 1st to 2nd it would go into a false neutral. now it won't stay in gear at all...


Always start with the easy (read cheap) stuff first. Make sure that the clutch is fully disengaging when in gear and engine running. If bike 'clunks' and lurches forward as soon as you shift into any gear, it may simply be that your clutch needs to be bled and/or adjusted so that you are fully engaging/disengaging the gear. More likely, however, the shift lever was subjected to a heavy foot resulting in the shift fork being bent. This prevents full engagement of the gear resulting in it popping out under load. Unfortunately, this repair requires a teardown. Continued operation with the tranny popping out of gear will round off the shift dogs and create an even more very expensive repair.

Mar 05, 2014 | 2004 kawasaki VN 1500 Vulcan Classic...

2 Answers

Need radator for kawasaki vn 1500 classic tourer 2001 is the driffter the same radator as the vn 1500 classic plz hellllllllllllp


TO ALL VN1500 OWNERS....This once happen to me,
I went to the garage to start the bike "Nothing ""The first thing is the lights are bright but no turning over,Next you think the solenoid is kaput but the answer was very simple and the fix takes 30 seconds..
Do not take the bike to bits looking for other problems and look at the clutch leaver and you will see some wires going into a plastic shroud going into the switch in the clutch leaver, Make sure this has not popped out if its connection as it some times may do after a few years due to constant turning on the handlebars,
When this is not connected you will have a bike that will not fire up but comes alive and you will hear a clicking noise but this is from the engine carb area and every function of the bike will work but it will not turn over, Worth looking at and saves sixteen quid for a starter unit you never needed.

Feb 06, 2012 | kawasaki VN 1500 Vulcan Classic Tourer Fi...

1 Answer

2002 Kawasaki VN 1500 Vulcan dies when put into gear


Hi, Kdompe357 and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Vulcan 800 Classic Stalls When Shifting Into 1st
Stalls when putting into gear first time
Suzuki VL1500 Service Manual
OEM parts for Suzuki
Suzuki Intruder VL1500B Owner Manual

Jun 24, 2017 | 2002 kawasaki VN 1500 Vulcan Meanstreak

2 Answers

Can you use mobil 1 Racing 4T 10W40 Full syn on final gear oil change


Yes. I have a 99 nomad and use valvoline 5w30 full synthetic. 30,000 miles with no problems

Jan 01, 2010 | 2001 kawasaki VN 1500 Vulcan Drifter

1 Answer

I have a rattle coming from my 2001 vulcan 1500.


You need to be really careful-it sounds like a bad bearing-bring it to an independent repair guy who has experience-doing bottom ends you need pro's theres a guy named zimmerman he writes mc books find him in a bookstore or web. it may also be a clutch problem

Jun 12, 2009 | 2001 kawasaki VN 800 Vulcan Classic

2 Answers

Will a 2008 nomad 1600 fuel tank fit my 1993 vulcan 1500? If not does anyone know what years of tanks will?


I have a 99 nomad and found a tank that is bigger to fit but they wanted 800 american for it. found an add on from a place called tour buddy.com for 200 with all the fittings. fits on the back where the luggage rack goes. 4.5 gallons. I love it.4432f0c.jpg

Mar 29, 2009 | kawasaki VN 1500 Vulcan Classic Tourer...

Not finding what you are looking for?
2004 kawasaki Vulcan 1500 Nomad Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...