Question about 2006 Honda Shadow Aero

1 Answer

I have a 2006 honda shadow aero. engine dies when put in gear. kickstand switch measuers good at plug...clutch switch measures good...clutch disengages properly...what else can it be?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 39,940 Answers

Hi, Dan the ignition circuit cut-off system comprising of the side stand switch, clutch switch and neutral switch has the following functions:
a. It prevents starting when the transmission is in gear and the side stand is up, but the clutch lever is not pulled.
b. It prevents starting when the transmission is in gear and the clutch lever is pulled, but the side stand is still down.
c. It cuts the running engine when the transmission is in gear and the side stand is moved down.
Periodically check the operation of the ignition circuit cut-off system according to the following tests.
With the engine turned off:
1. Move the side stand down.
2. Make sure that the engine stop switch is set to "RUN"
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
5. Push the start switch if the engine does not start the neutral switch may be faulty.
With the engine still running:
6. Move the side stand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the side stand down if the engine does not stall you may have a faulty side stand switch.
After the engine has stalled:
10. Move the side stand up.
11. Keep the clutch lever pulled.
12. Push the start switch if the engine does not start you may have a faulty clutch switch.
This check is most reliable if performed with a warmed-up engine.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Dies when put it in gear 2003 Honda Spirit VT 750
Bike only starts in neutral and Dies when put in gear
Honda VT750C2 Shadow Spirit Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda VT750C 2005 Shadow Aero Owner Manual

Posted on Apr 29, 2017

Testimonial: "this helped with the troubleshooting, but the problem ended up being a broke wire between the headlight and ICM."

  • Gregg Mahin
    Gregg Mahin Apr 30, 2017

    you got it fixed that's all that matters good job

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda Shadow VT1100 Ace shuts off when shifted into gear


Hi, Wayne and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Dies when put it in gear 2003 Honda Spirit VT 750
Engine dies when put into Gear
Honda SHADOW VT1100 Owners Workshop Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda Shadow VT1100 Owner Manual

Jun 18, 2017 | Honda VT 1100 C Shadow Motorcycles

1 Answer

1993 Honda Shadow 600 stalls when I put it in gear. I don't have a kickstand switch. I put a new nut sensor in, new fuel pump, relay and cleaned the carb. This just happens out of nowhere too. So I would...


Hi, Jon #1&2 are jumping up and down waving red flags yelling "Pick Me Pick Me" otherwise the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
VT600C being frustrating again dies when put in gear
Runs fine in neutral dies when put it in gear Suzuki GSX Motorcycle Forums...
http://www.vt600vlx.com/VLX%20VT600%2088-89%2091-96%20Service%20Manual%2061MR107.pdf
http://www.partsfish.com/page/oem-parts-for-honda
http://www.vt600vlx.com/VT600C-1992.pdf

Jan 09, 2017 | 1993 Honda VT 600 C Shadow

1 Answer

HONDA SHADOW SPIRIT DIES WHEN IN GEAR


Hi, Anonymous and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Dies when put it in gear 2003 Honda Spirit VT 750
http://www.cyclechaos.com/4um/f66/why-does-my-honda-shadow-stall-when-i-put-gear-even-clutch-3839
Honda 1998 VT750C Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda VT750C Owner Manual

Jul 05, 2014 | 2005 Honda Shadow Spirit 750

1 Answer

1997 Honda VT 600 C Shadow dies when put into gear


Hi, Anonymous and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Dies when put it in gear 2003 Honda Spirit VT 750
Engine dies when put into Gear
Honda VT600C Shadow VLX Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda VT600C Owner Manual

May 21, 2014 | 1997 Honda VT 600 C Shadow

1 Answer

2004 Honda, 1100 Shadow Spirit, starts fine, ideals fine, but when I put it in gear it dies


Hi, David_rebeka and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Dies when put it in gear 2003 Honda Spirit VT 750
Put the bike in gear and engines dies
Honda shadow vt1100 Owners Workshop Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda VT1100C2 Owner Manual Page 3

Aug 29, 2011 | 2004 Honda VT 1100 C Shadow Spirit

1 Answer

I just bought a 2004 honda shadow custom. It idles perfectly but when I put it in gear it dies as iff the clutch is not engaged. I have check the cable and it is tight what else can I do?


Did you check the kickstand kill switch? I had the same problem on my yamaha, Ran fine, could throttle it up no problem, but when i put it in gear it died. Found that the kill switch was bad. Hope it is that simple.

Nov 21, 2010 | 2004 Honda VT 750 Shadow Aero

2 Answers

I have an 03 Honda 750 Shadow. I start the bike in nuetral and then put it in gear and it dies. It dies instantly.


Your kickstand switch is either broken or out of position. The bike kills the engine as a safety feature if it thinks the sidestand is down and the bike is put in gear while the engine is running.

Apr 12, 2009 | 2003 Honda VT 750 CD Shadow A.C.E. Deluxe

3 Answers

Honda Shadow 600 c won't start in gear after battery change


The kickstand switch is either bad or bent out of position. See if you can activate the switch manually. Does the bike run now? If so, the switch is bent out of position. If it still won't run, jumper the wires together until you can replace the switch.

Apr 11, 2009 | 2002 Honda VT 1100 C3 Shadow Aero

Not finding what you are looking for?
2006 Honda Shadow Aero Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...