Question about 1982 Yamaha XJ 650

1 Answer

Turns over no spark to plug - 1982 Yamaha XJ 650

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Initially, try starting the bike with the clutch lever pulled in and / or the side stand folded up. Further on, check the 10Amp ignition fuse and the for the presence of IGN + 12  after the ignition switch and the Engine Run / Kill switch.

Good luck and thank you for asking FixYa.

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change the sparkplug


Very simple . Remove spark plug wire from spark plug . Get appropriate size spark plug socket and use a ratchet and extention is needed . Turn spark plug anti-clockwise to remove . Ensure the spark plug are installing the correct spark plug for the engine .Check the plug gap using a feeler gauge , then install by hand , tighten by turning clockwise and reconnect plug wire . last , " start engine " .

Sep 30, 2014 | Garden

Tip

Toyota Highlander_ How to change plugs


The Toyota Highlander is available in three different engine sizes: 2.4, 3.0 and 3.3 liter. The basic technique for replacing spark plugs is used for both engine sizes, but depending on the engine size you need to remove different parts from the Toyota Highlander to gain access to the spark plugs.
  1. 1 Pull the hood release and raise the hood on the Highlander. Allow the engine plenty of time to cool.
  2. 2 Remove some components to reach the spark plugs. On a 3.3 liter engine, unscrew and remove the V-bank cover and intake air tank. On a 2.4 and 3.0 liter engine, remove the number one engine cover.
  3. 3 Locate the ignition coils and spark plug wires that connect directly to the spark plugs or directly to the engine in the Toyota Highlander. In 2001 and 2002 models, theses are on the front and back of the engine. On models made after 2002, the spark plugs are along the sides. Grab the ignition coils or spark plug wires by the thick plastic piece at the end of the wire. Squeeze the end and turn it to release it from the spark plug. Pull back to remove the plug from the engine.
  4. 4 Slide the spark plug socket over the spark plug. The most common size of spark plug socket used on a Toyota Highlander is 16mm. Turn the socket to the left to unscrew and remove the spark plug from the cylinder well.
  5. 5 Apply a thin coat of anti-seize compound to the spark plug thread and into the wire boot to reduce the chance of sticking.
  6. 6 Insert the spark plug into the well and manually turn the plug into place. If you cannot reach the plug well manually, insert the plug into the socket and extension and use the extension to turn the plug into place. Do not use a socket wrench or flexible extension for this process because their force damages the spark plug.
  7. 7 Connect the ignition coil or spark plug wire to the spark plug. Turn to lock it into place.
  8. 8 Continue this process for the rest of the spark plugs. Replace any removed items onto the engine and lower the hood.



on Jan 26, 2011 | Toyota Highlander Cars & Trucks

1 Answer

Spark plug wiring diagram for a 2003 chevy malibu


SPARK PLUG WIRE REPLACEMENT (ENGINE CONTROLS - 3.1L)

Removal Procedure


    211481.png
  1. Turn OFF the ignition.
  2. Notice: Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
  3. Remove the spark plug wires 2, 4, and 6 from the engine left side spark plugs.
  4. Remove the spark plug wires from the retaining clips.

  5. 211485.png
  6. Remove the spark plug wires 1, 3, and 5 from the engine right side spark plugs.
  7. Remove the spark plug wires from the retaining clip.

  8. 162818.png
  9. Remove the spark plug wires from the ignition coils.
  10. Remove the spark plug wires from the engine.
  11. If you are replacing the spark plug wires, transfer any of the following components:
    • Spark plug wire conduit
    • Spark plug wire retaining clips

Installation Procedure


    162818.png
  1. Install the spark plug wires to the engine.
  2. Install the spark plug wires to the ignition coils.

  3. 211485.png
  4. Install the spark plug wires 1, 3, and 5 to the engine right side spark plugs.
  5. Install the spark plug wires to the retaining clip.

  6. 211481.png
  7. Install the spark plug wires 2, 4, and 6 to the engine left side spark plugs.
  8. Install the spark plug wires to the retaining clips.
v\:* { behavior : url(#default#VML); position:absolute; } v\:* { behavior : url(#default#VML); position:absolute; }

Aug 20, 2014 | Vehicle Parts & Accessories

1 Answer

Change spark plugs


  1. Disconnect the spark plug wire at each spark plug.
    • Twist each spark plug 1/2 turn.
    • Pull only on the boot in order to remove the wire from each spark plug.
  1. Disconnect the spark plug wire from the ignition coil.
    • Twist each spark plug boot 1/2 turn.
    • Pull only on the boot in order to remove the wires from the ignition coil
  • Install the spark plug wires at the ignition coil.
  • Install the spark plug wire to each spark plug.
  • Inspect the wires for proper installation:
  • Repeat above procedure for all 8 cylinders.
  • Jun 17, 2013 | 2003 Hummer H2

    2 Answers

    Need to replace sparkplugs on 2002 ford escape


    well replace spark plugs is not a hard job,when replacing spark plugs, good time to replace plug wires also.you need to replace one spark plug at a time so you wont mix up firing order. you need a spark socket, torque wrench, 3/8 ratchet wrench, 3/8 short and long extensions,you need a spark plug gap gauge.spark plug gap for 2.0 engine 0.051 the 3.0 engine spark plug gap is 0.052 - 0.056. just follow spark plug wires they will lead you to the spark plugs.warning wait until engine cool down first because removing spark plugs from hot engine could damaged the aluminum heads,use compressed to blow away debris before removing spark plugs keep debris falling into the cylinders.wear safety glasses if you use compress air and use small amount anti seize compound to the spark plug threads.good idea slip a short length rubber hose over the end of spark plug to use as a tool thread it into place.reason i use piece vacuum hose it will grip the spark plug enough to turn it, but will start to slip if the plug begin to cross thread.when installing spark plug, it should turn at least few times if spark plug start tighten before 1/4 turn thread cross threading need to back off start over dont keep turning you will stripped spark plugs threads in the head also damage spark plug threads, so be careful, good luck with job.

    Aug 26, 2012 | 2002 Ford Escape

    1 Answer

    I want to change my own spark plug's


    Instructions
      • Locate the spark plug cables along the top or the sides of the engine, depending on CR-V model. Once the engine cools, use the trim panel tool to twist the spark plug wire at the wire's boot, which is the larger rubber portion located on top of the spark plug.
      • 2Pull back on the spark plug wire to remove it from the spark plug.

      • Place the socket on top of the spark plug and turn it counter-clockwise to unscrew and remove the spark plug from the well.
      • 4Rub anti-seize lubricant onto the new spark plug threads and on the tip of the spark plug.
      • 5Insert the new spark plug into the well. Manually turn the plug clockwise to thread the spark plug into place.
      • 6Test the tension on the plug with the tension testing tool. Adjust the tension as needed. Honda CR-V spark plugs generally need a tension between 10 and 15 foot pounds. The spark plug's packaging indicates its suggested tension.
      • 7Replace the spark plug wire, turn it from side to side and lock it into place. Continue the process with the rest of the spark plugs one at a time until all of the spark plugs are replaced.

    Jun 24, 2012 | 1999 Honda CR-V

    1 Answer

    Plug turned a 1/4 turn and locked down didnt want to force it


    no dont force spark plug its trying to cross thread.back spark plug back out.apply thin coat of anti seize compound to spark plug threads.if you have problems getting spark plugs back in a hard to reach place, use a long piece 3/8 vacuum hose about what ever length you need.place vacuum hose over spark plug insulator then install spark plugs to hard reach places to keep from cross threading.if plug tighten 1/4 turn.back out spark plug and try again.dont cross thread or you have to remove cylinder head.if spark plug hole hard to reach to retap or install thread inserts.

    Apr 09, 2011 | Toyota Pickup Cars & Trucks

    1 Answer

    Anyone have picture/illustration of where the spark plug are located on a 2005 highlander?


    1. 1 Pull the hood release and raise the hood on the Highlander. Allow the engine plenty of time to cool.
    2. 2 Remove some components to reach the spark plugs. On a 3.3 liter engine, unscrew and remove the V-bank cover and intake air tank. On a 2.4 and 3.0 liter engine, remove the number one engine cover.
    3. 3 Locate the ignition coils and spark plug wires that connect directly to the spark plugs or directly to the engine in the Toyota Highlander. In 2001 and 2002 models, theses are on the front and back of the engine. On models made after 2002, the spark plugs are along the sides. Grab the ignition coils or spark plug wires by the thick plastic piece at the end of the wire. Squeeze the end and turn it to release it from the spark plug. Pull back to remove the plug from the engine.
    4. 4 Slide the spark plug socket over the spark plug. The most common size of spark plug socket used on a Toyota Highlander is 16mm. Turn the socket to the left to unscrew and remove the spark plug from the cylinder well.
    5. 5 Apply a thin coat of anti-seize compound to the spark plug thread and into the wire boot to reduce the chance of sticking.
    6. 6 Insert the spark plug into the well and manually turn the plug into place. If you cannot reach the plug well manually, insert the plug into the socket and extension and use the extension to turn the plug into place. Do not use a socket wrench or flexible extension for this process because their force damages the spark plug.
    7. 7 Connect the ignition coil or spark plug wire to the spark plug. Turn to lock it into place.
    8. 8 Continue this process for the rest of the spark plugs. Replace any removed items onto the engine and lower the hood.

    Read more: How to Replace Spark Plugs in a Toyota Highlander ' eHow.com http://www.ehow.com/how_4484644_replace-spark-plugs-toyota-highlander.html#ixzz1C6Y4k5y2

    Jan 26, 2011 | 2005 Toyota Highlander

    1 Answer

    Replacing rear spark plugs


    Hi,

    Things You'll Need: Spark plug socket and wrench

    Twist and pull the spark plug wire from the leftmost spark plug on the front of the engine. Grasp the spark plug wire by the "boot" or the end of the wire that cups the plug. Avoid pulling on the wire itself.

    Place the spark plug socket on the spark plug. Turn the wrench counterclockwise to remove the spark plug. Unscrew the plug until it is fully removed from the engine.

    Install the new spark plug by carefully placing it in the hole by hand. Turn the spark plug clockwise, but do so only gently by hand. Ensure that the spark plug screws in gently and naturally. Stop turning it at the first sign of major resistance. Check to make sure that you have not stripped the threads. Move on to the next step only when you're sure that you've positioned the plug at the correct angle and have it threaded most of the way in.

    Position the spark plug socket over the spark plug and tighten it with the ratchet. Avoid tightening it too much. It will offer increased resistance for about half a turn as the metal washer on the plug is compressed. Once it is good and snug, stop there.

    Replace the wire by handling the boot of the spark plug wire. Listen for a "click" that indicates correct installation.

    Use this procedure for the remaining two plugs on the front and the three plugs on the back of the engine. Remove and replace one plug at a time, to ensure that you don't mix up the wires.

    Best regards.

    Oct 29, 2010 | 2003 Mazda MPV

    2 Answers

    How do you replace the spark plugs on a 1998 2.7 Intrepid?


    Hi,
    REMOVAL
    Always remove the ignition coil assembly by grasping at the spark plug boot, turning the assembly 1/2 turn and pulling straight back in a steady motion.
    • Prior to removing the spark plug, spray compressed air around the coil area and spark plug.
    • Remove electrical connector from ignition coil.
    On 3.5L engines, it is necessary to loosen the screws by alternating back and forth. Do not lose the spacers under the coil when loosening the screws.
    • Remove 2 fasteners from ignition coil.
    • Remove ignition coil assembly.
    • Remove the spark plug using a quality socket with a rubber or foam insert.
    • Inspect the spark plug condition.
    INSTALLATION
    Always remove the ignition coil assembly by grasping at the spark plug boot, turning the assembly 1/2 turn and pulling straight back in a steady motion.
    • To avoid cross threading, start the spark plug into the cylinder head by hand.
    • 3.5L engines tighten spark plugs to 28 N·m (20 ft. lbs.) torque, 2.7L engine tighten spark plugs to 17.6 N·m (13 ft. lbs.).
    • Install ignition coil assembly onto spark plug.
    • Install coil screws and tighten: 2.7L engine to 6.2 N·m (55 in. lbs.), 3.5L engines to 6.7 N·m (60 in. lbs.).
    • Connect the electrical connector.

    Aug 27, 2010 | 1996 Dodge Intrepid

    Not finding what you are looking for?
    1982 Yamaha XJ 650 Logo

    Related Topics:

    163 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Yamaha Experts

    dhnguyen

    Level 2 Expert

    281 Answers

    Steve Sweetleaf
    Steve Sweetleaf

    Level 3 Expert

    1144 Answers

    Tony

    Level 3 Expert

    2600 Answers

    Are you a Yamaha Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...