Question about Motorcycles

2 Answers

Engine cut off without rev when my bike bounce(ride over humps or uneven road) anyone got any idea?

Posted by on

  • Siew Cejay
    Siew Cejay Apr 27, 2017

    Hi Jon, its not like cut off straight away but is like the timing will turn low and cut off after bounce, i can set the timing higher so it wont cut off but i think thats not the solution as in the timing is too high

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 572 Answers

Could be the side stand switch

Posted on Apr 27, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Motorcycles Master
  • 20,081 Answers

Could be the side stand switch, if it has one.

Posted on Apr 27, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Mazda Tribute 2002 engine cuts out randomly

I had a Mazda 626 with a similar problem, the car seemed to 'shut down' with no warning, even at highway speeds, as if I just turned the ignition key to 'Off'; After trying to fix it unsuccessfully by replacing several electrical parts, the problem was found to be a defective ignition switch, it was replaced and the problem went away.

Posted on Apr 29, 2009

  • 32 Answers

SOURCE: vauxhall vectra 1998 1.8 16v engine revs race and cuts out.

throttle position sensor is faulty.

Posted on Jul 04, 2009

  • 2 Answers

SOURCE: motorcycle dies while riding,like gas is cut off

Check fuel pump. You might have a bad diaphragm.

Posted on Sep 06, 2009

perpetually
  • 360 Answers

SOURCE: uneven grass cutting

I have seen dull blades, blades not installed right and an un-level deck cause that.

Hope this helps.

Posted on Sep 21, 2009

  • 124 Answers

SOURCE: Running problems

I am not completely positive that this is your problem but one thing to try when it starts cutting out is to loosen the fuel cap. On a lot of 2000 through 2004 Harleys the vent in the fuel cap gets plugged up and creates a vacuum not allowing the fuel to flow to the carbs. If this doesn't help run the trouble codes to see if there is a ECM related problem. To access the codes, turn the ignition on for about 3 seconds (one second after the fuel pump stops running) and then turn the ignition off for 3 seconds. Repeat this, then turn the ignition on and the codes will flash on the check engine light after about 8 seconds. The first series of flashes (about 3 flashes per second) are intermission flashes then there will be a 2 second delay and the first code will flash. If the first digit of the code is 1 the light will flash one time and then there will be a 2 second pause before the second digit. There will be a 1 second delay between flashes for a digit of 2 or more. All codes are 2 digit codes. For example, 11 would be throttle position sensor, 12, barometric pressure sensor, 14 engine temperature sensor, 15 intake air temperature sensor, 16 battery voltage, 23 and 32 fuel injector, 24 and 25 ignition coil, 33 fuel pump relay, 52,53,54,55 ECM failure, 56 crank position and cam position sensor timing.
Hope this helps.

Posted on Nov 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Riding along the road engine slowly came to a stop. wouldn't start again flat battery RAC man charged the battery bike started got a mile or so down the road we did this three time got home with out it...


I think you could have an intermitant open circuit inside your battery. One of the links joining the cells is loose and makes contact sometimes and not other times. Replacing the battery could fix the problem. There appears to be notthing amiss in your charging system.

Apr 09, 2010 | 1999 kawasaki ZX-6R Ninja

1 Answer

GSXR 400 rev problem


The float level in your carb probably needs to be adjusted. If the gasoline level in your float bowl is borderline low, your bike may run fine when level. But on the incline, the gas level at the jet may be too low causing your engine to be starving for gas. The solution is to remove the bowl and bend the tab on the float that pushes the valve up so that the gas won't shut off until the level is higher. If you are a good mechanic, you may try this yourself. If not, take it to someone who can do this for you.

Nov 04, 2009 | 1998 Suzuki GSX 400 Impulse

1 Answer

Engine cutting out whilst riding along


Hi
If all the electrics go off then :-
A) Check tightness of battery terminals & condition of battery
B) Check for dodgy fuse or dirty connections
C) Check voltage across battery terminals when engine running - should be at least 12.5v rising with increasing revs to 15v max - if not then suspect the regulator/rectifier unit or the wiring from it to battery

I hope this helps, if so please mark as helpful.
Positive comments always appreciated

Ride Safe
Bike-Doc

Sep 19, 2009 | 1991 Honda CBR 250 RR

2 Answers

I have a 2000 (W reg) GPZ500S which has not run through the winter. The battery lost all of it's charge and the bike needed bump starting. On it's first ride out i noticed that the rev counter needle was...


i would get your battery tested sounds like low voltage it should test 12.7 volts if it is good. batterys usually dont survive after being dead for any lenght of time.

Apr 01, 2009 | 2000 kawasaki GPZ 500 S - GPX 500 R

2 Answers

2006 Harley Davidson FLHR Road King


yes you should start it at least once weekly to maintain battery and keep engine lubricated, also it keeps fuel flowing through the bike. but dont just start up then switch off, make sure you get it up to normal operating temprature, this keeps moisture out of the engine oil.

Jan 28, 2009 | 2006 Harley Davidson FLHR Road king

1 Answer

Revs boucing


try to add some lucas aditive to it, if does not solve the problem then your reverse might be about to brake, but this lucas aditive try to add with a transmission tune up at same time

Jun 18, 2008 | 2003 Volkswagen Golf

1 Answer

Problems with Rev's on my golf


could be the MAF sensor (mass airflow sensor) ??

Jun 16, 2008 | 2003 Volkswagen Golf

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...