Question about 1996 kawasaki EN 500 Vulcan Classic

1 Answer

Ninja misfire i have a zx6r and i pull away and it wont let me go above 30 it feels strangled and it keeps misfiring any help please????

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Offhand, it would appear to be an air / fuel problem.  Initially, check the air box / filter. Verify that there is no air leak and that all air coming in through the carbs passes the filter.  This also happens when the air filter and its enclosure has been replaced with open breathers such as K & N's or the exhaust system has been altered.

Good luck and thank you for asking FixYa.

Posted on Jul 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zx6r j2 electric shocks off fuel tank


Does the engine misfire? Check your HT leads (connect the spark plugs to the coils) is one of them loose?

Apr 09, 2014 | 1998 kawasaki ZX-6R Ninja

1 Answer

2001 Kawasaki ZX-6R Ninja misfires


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Spark plugs in bad condition or partially fouled.
4. Spark plug cables in bad condition and leaking check for spark leakage in the dark
5. Spark plug gap too close or too wide.
6. Faulty ignition coil, module, and or sensor.
7. Loose, dirty, or corroded ignition module connector at crankcase.
8. Faulty CKP or CMP, MAP, ETS, ATS, TPS, O2 sensor.
9. Dirty air filter.
10. Intake air leak.
11. Water, dirt, or rust in the fuel system.
12. Carburetor contaminated, sticky float, plugged jets.
13. Carburetor has oil in the bowl due to excessive oil in pre-mix.
14. Carburetor vacuum diaphragm torn, cracked, not seated or installed improperly.
15. Multiple carburetors out of sync.
16. Fuel filter clogged.
17. Old or contaminated fuel.
18. Fuel tank vent system plugged or carb vent line closed off.
19. Gas cap diaphragm valve faulty.
20. Vacuum line from intake manifold to fuel valve is broken, cracked, pinched, or missing.
21. Carburetor controls misadjusted.
22. Incorrect valve timing.
23. Valve springs floating, weak, or broken.
24. Damaged intake or exhaust valve.
25. Incompatible performance parts.
26. The control module may be in "LIMP" mode
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
misfire new spark plug KawiForums Kawasaki Motorcycle Forums
2003 ZX6R misfire not plugs not injectors not wires Sportbikes net Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Dec 15, 2012 | 2001 kawasaki ZX-6R Ninja

1 Answer

Zx6r ninja acceleration issues


hi there i think your jets are blocked in the carbs , need to strip the carb and cleen the jets and the bowl ect.. hope this helps

Sep 25, 2009 | 2001 kawasaki ZX-6R Ninja

2 Answers

88 zx6r c-model breaks down runns on 2 cylinders tach bounces


check the caburator and the plug to see that they effective ok

Jul 21, 2009 | 1995 kawasaki ZX-6R Ninja

1 Answer

My ninja loses power in the wind


Do you have a "RAM AIR" system on that bike, if so that may be what happens when you ride into a headwind. The bike may be running a little lean and with the extra intake pressure goes too lean.

Jun 06, 2009 | 1999 kawasaki ZX-6R Ninja

2 Answers

Kawasaki zx6r 1997 slight misfiring


when i ride my bike and i crack down on it it boggs down its a 96 zx6r

Apr 21, 2009 | 1998 kawasaki ZX-6R Ninja

Not finding what you are looking for?
1996 kawasaki EN 500 Vulcan Classic Logo

252 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4988 Answers

yadayada
yadayada

Level 3 Expert

80407 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...