Question about 2008 Suzuki GSXR1000

1 Answer

GSX-R K7 1000 turn signals not working - 2008 Suzuki GSXR1000

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Suzuki Master
  • 40,028 Answers

Hi, Wynand before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced you OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Turn signal issue Suzuki GSX Motorcycle Forums Gixxer com
Fix for turn signals and hazards not working
Suzuki GSX R1000 Service Manual
OEM parts for Suzuki
Suzuki GSX R1000 Owner Manual

Posted on Apr 25, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1993 gsxr 750w with an aftermarket tail and when I hook all the directionals up only the front work. If the back Is connected by its self they work.


Hi, Steven you need a load equalizer before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced you OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity. For more information about your issue and valuable "FREE" downloads that you will please click on the links below. Good luck and have a nice day.
Suzuki GSX R750W 1993 Service Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki/suzuki-gsx-owners-manuals

Sep 13, 2016 | Suzuki GSX-R 750 Motorcycles

1 Answer

All signals stopped working


Sounds to me like the switch itself needs replaced. You could try pulling it apart and checking for corrosion and cleaning the contacts up but the switches are pretty cheap.

Apr 07, 2014 | 1990 Suzuki GSX 750 F (Katana)

1 Answer

I have a 2009 model Suzuki Hayabusa.The turn signal fuse which is 10amp keeps blowing.This leaves me with no turn signals,rear tail light,brake light, and no dash functions.Any ideas anyone???


I've got the same problem on my 08 Busa. Both times happened after turning left. The second definitely happened when I turned on the left turn signal. The 4 way flashers worked after I replaced the fuse the first time. Perhaps the left turn signal worked a few times between replacing the fuse the first time the second time it blew. I looked at the left handlebar switch and can't see a problem in it. Next, I'm going to trace some wires.

Bugslayer

Sep 17, 2010 | 2008 Suzuki GSX 1300 R Hayabusa

1 Answer

No working lights on 2000 suzuki gsx 600 katana (electrical)


IF EVERYTHING ELSE IS OK, SOUNDS LIKE YOUR IGNITION SWITCH COULD BE GOING BAD.

Oct 20, 2009 | 2000 Suzuki GSX 600 F (Katana)

1 Answer

When i use my turn signal it blows my fuse and gaugaes nor the speedometer works


Follow the turn signal's wires all the way from the hand switch to the relay to find where it is stripped and touches the chassis.Both wires are positive.Gauges and speedometer probably uses the same fuse with the turn signals so if it is blown the shouldn't work naturally.

Jun 07, 2009 | 1994 Suzuki GSX-R 750 WR

1 Answer

My signal lights, hazard lights, and tail light aren't working.


Check the rear bulbs.If they are working (brakes+lights) check the wires.For the turn signals, override the flasher relay.If they are coming on then you need to replace the relay.If not then check the left hand side clip on switch.

Jun 04, 2009 | 2006 Suzuki GSX 1300 R Hayabusa

1 Answer

Turn signals dont work all gauges in dash dont work 1999 mitsubishi eclpise gsx


The first thing you should check is your fuses and if they are alright replace your signal boxes. A signal box is like a big square box about 2.5cm square under your dash most likely mounted on your steering column or just next to it. I had the same problem with my 2001 vx commodore and it was the signal boxes.

Jul 21, 2008 | Mitsubishi Eclipse Cars & Trucks

Not finding what you are looking for?
2008 Suzuki GSXR1000 Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...