Question about 1993 Suzuki VS 1400 Intruder

1 Answer

I want to bypass my ignition switch on my 1993 susuki 1400 intruder

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Suzuki Master
  • 40,655 Answers

Hi, Russell for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How to fix your Ignition Switch
Ignition Bypass
Suzuki Intruder VS1400 Service Manual
OEM parts for Suzuki
Suzuki VS1400 Owner Manual

Posted on Apr 25, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Intruder 1400. Can solenoid relay switch be bypassed?


Suzuki Intruder 1400cc Starting Problems - YouTube

? 3:50
https://www.youtube.com/watch?v=MZ65ch6j3Yc
Mar 13, 2013 - Uploaded by Lord Baccus
Starting issues with Suzuki Intruder 1400. ... You can mash the start button all you want but I won't do it. ... defective and ONLY sending 7volt to the Starter ~ by Bypassing it I get 12v to the Starter Solenoid / causing the starter to .... My problem was because I got low on gas and needed to switch it to reserve.

how to bypass a MMM on a suzuki marauder - YouTube

? 1:52
https://www.youtube.com/watch?v=gIoCBcOb7ZU
Mar 20, 2010 - Uploaded by josh p
bypassing the MMM on my 99 suzuki. To permanatly bypass, connect the y/g and y/b together and tape up ..

Nov 28, 2015 | Suzuki Motorcycles

1 Answer

My 1993 suzuki intruder 1400 isnt getting spark


your generator problly does not have a good seal. take the cover off clean the rust then reseal. Good luck

Apr 14, 2014 | 1993 Suzuki VS 1400 Intruder

1 Answer

Where's the flasher on a 1993 Suzuki Intruder VS 1400?


replace the indicater relay ! trace back the same colour wires !

Apr 04, 2014 | 1993 Suzuki VS 1400 Intruder

1 Answer

Won't Idle at stop signs.


could be as simple as idle speed adjustment. screw located on r/h side near rear carb. almost directly behind ignition switch but on opposite side of bike. If bike has had a history of sitting up however it may need a proper carb/ fuel system cleaning and synchronization to perform correctly.

May 23, 2013 | 1993 Suzuki VS 1400 Intruder

1 Answer

I just bought a new battery for my suzuki intruder and still have no lights or anything when i turn the key on


Have you checked all the major gounds,including the battery ground cable? Also,use a test light,and see if voltage is going to the other wires on the ignition switch when you turn it on. You should have one wire that is 12v all the time,and when switching the key to the run position,it should have 12v on 3 wires.If i had to make and educated guess,id say your ignition switch is bad,...but be sure that you check ALL of your fuses,and main grounds first.
Good Luck!

Sep 27, 2012 | 1993 Suzuki VS 1400 Intruder

1 Answer

1993 suzuki 1400 intruder starting problem


Hi, Dj you need a new mechanic or tell the old one to perform a "VOLTAGE DROP TEST" and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the enrichner.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch lever, or kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Intruders Alert
What to do When Your Motorcycle Won Start
Suzuki Intruder VS1400 Service Manual
OEM parts for Suzuki
Suzuki VS1400 Owner Manual

May 30, 2017 | 1993 Suzuki VS 1400 Intruder

1 Answer

1400 suzuki intruder electrical failure


The clutch safety switch on the handle bars might be bad. I changed mine when I had this problem and had no problems after this. Hope this helps.

May 03, 2012 | 1995 Suzuki VS 1400 Intruder

1 Answer

What are the intake and exhaust valve specifications on the 1993 Suzuki VS 1400 Intruder?


try this site http://www.rockauto.com/catalog/raframecatalog.php?make=SUZUKI&year=1993&a=www.google.com.ph%2BSearch%2Bfor%2B1993%2BSUZUKI

Apr 28, 2011 | 1993 Suzuki VS 1400 Intruder

Not finding what you are looking for?
1993 Suzuki VS 1400 Intruder Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...