Question about Motorcycles

1 Answer

How do I remove off of bike to replace battery

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Motorcycles Master
  • 43,901 Answers

Hi, Kathy I would really love to help you but due to the magnitude of yesterday's solar flare the batteries in my crystal ball are dead and my mental telepathy headset circuitry was melted. I need the year, make, and model of your motorcycle please click on the word "COMMENT" below and provide this information in the box that will open and then click on the green comment box in the bottom right-hand corner after it posts I will receive an "ALERT" icon that will allow me to respond to your information.
Good luck and have a wonderful day.

Posted on Apr 22, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My motorcycle sat 6 weeks cleaned fuel tank replaced battery even put battery on a charger bike turns over but won't start checked hoses filters connections still will not go it has spark now I'm puzzled


Hi, Jeffery if your bike has been sitting idle for months or years and you did not do any pre-storage maintenance I feel your pain it will probably have a dead battery and not want to start or if it starts it will idle and run poorly, here are the following steps necessary to complete in order to get your bike back to an acceptable running condition.
1. If your battery was 3 years or older when you last had the bike running you should replace it.
2. If you believe your battery might still be serviceable remove it from the bike and put it on a 1 or 2 amp trickle charger for 24 hours. If it is the old lead acid type with visible cells and acid levels fill each cell to the top line with distilled water and replace the caps, run the vent tube into a plastic or styrofoam cup, any cells that are cloudy/milky replace the battery.
3. After charging remove the leads and let the battery sit for a couple of hours then check the battery voltage with a volt meter, you should have 12.5 volts or better, any readings in the 11 volt range you need to do a proper load test on the battery and replace as necessary, any readings in the 10 volt range you have a dead cell and replace the battery.
4. Drain and flush fuel tank, google " how to clean a motorcycle gas tank" find a couple forums to view the different options available.
5. Remove your air cleaner and clean and re-oil per Mfg. specifications.
6. Remove the carburetor, disassemble and decontaminate with a carb dip or if you have EFI remove injectors and clean with carb spray and compressed air
7. Remove fuel valve and filter disassemble and clean as necessary, remove fuel lines and replace with new ones.
8. Replace spark plug with a new one and check for spark.
Good luck and have a nice day.

Mar 16, 2016 | Motorcycles

1 Answer

WHAT DOES IT MEAN WHEN THE BIKE WILL ONLY STAY RUNNING WITH THE CHOKE IN THE OPEN POSITION


Hi, Scott if your bike has been sitting idle for months or years and you did not do any pre-storage maintenance I feel your pain it will probably have a dead battery and not want to start or if it starts it will idle and run poorly, here are the following steps necessary to complete in order to get your bike back to an acceptable running condition.
1. If your battery was 3 years or older when you last had the bike running you should replace it.
2. If you believe your battery might still be serviceable remove it from the bike and put it on a 1 or 2 amp trickle charger for 24 hours. If it is the old lead acid type with visible cells and acid levels fill each cell to the top line with distilled water and replace the caps, run the vent tube into a plastic or styrofoam cup, any cells that are cloudy/milky replace the battery.
3. After charging remove the leads and let the battery sit for a couple of hours then check the battery voltage with a volt meter, you should have 12.5 volts or better, any readings in the 11 volt range you need to do a proper load test on the battery and replace as necessary, any readings in the 10 volt range you have a dead cell and replace the battery.
4. Drain and flush fuel tank, google " how to clean a motorcycle gas tank" find a couple forums to view the different options available.
5. Remove your air cleaner and clean and re-oil per Mfg. specifications.
6. Remove the carburetor, disassemble and decontaminate with a carb dip or if you have EFI remove injectors and clean with carb spray and compressed air
7. Remove fuel valve and filter disassemble and clean as necessary, remove fuel lines and replace with new ones.
8. Replace spark plug with a new one and check for spark.
For more information about your issue please visit the websites below. Good luck and have a nice day.
https://www.vulcanrider.se/en/kawasaki-vulcan-service-manuals
Buy Kawasaki OEM PartsMotorcycle ATV Mule Accessories
http://www.kawasaki-techinfo.net/searchOM.php?view_lang=EN&spec=OC&book_no=&lang_code

Dec 23, 2015 | 1998 kawasaki VN 1500 Vulcan Classic

1 Answer

How do I replace battery on sportsart C52r recumbent bike?


  • You will have to remove the left and right side covers to expose the inside of the bike, once locating the battery it is resting inside of an open bracket.

  • The removal of the old battery should be easy once you have exposed the inside.

  • Disconnect the positive and negative cables to the battery.

  • The part number for your battery is C52U-34 and it is a 6V battery.

Please be sure to be cautious when removing and installing electrical components.

If you need any further assistance please do not hesitate to call our Tech Support Team or visit us online www.sportsmith.net

Jun 13, 2015 | Exercise & Fitness

1 Answer

2007 vstar 1300 no power runs very hot


Hi, Anonymous if your bike has been sitting idle for months or years and you did not do any pre-storage maintenance I feel your pain it will probably have a dead battery and not want to start or if it starts it will idle and run poorly, here are the following steps necessary to complete in order to get your bike back to an acceptable running condition.
1. If your battery was 2-3 years old when you last had the bike running you should replace it.
2. If you believe your battery might still be serviceable remove it from the bike and put it on a 1 or 2 amp trickle charger for 24 hours. If it is the old lead acid type with visible cells and acid levels fill each cell to the top line with distilled water and replace the caps, run the vent tube into a plastic or styrofoam cup, any cells that are cloudy/milky replace the battery.
3. After charging remove the leads and let the battery sit for a couple of hours then check the battery voltage with a volt meter, you should have 12.5 volts or better, any readings in the 11 volt range you need to do a proper load test on the battery and replace as necessary, any readings in the 10 volt range you have a dead cell and replace the battery.
4. Drain and flush fuel tank, google " how to clean a motorcycle gas tank" find a couple forums to view the different options available.
5. Remove your air cleaner and clean and re-oil per Mfg. specifications.
6. Remove the carburetor, disassemble and decontaminate with a carb dip or if you have EFI remove injectors and clean with carb spray and compressed air
7. Remove fuel valve and filter disassemble and clean as necessary, remove fuel lines and replace with new ones.
8. Replace spark plug with a new one and check for spark.
For more information about your issue and valuable "FREE" downloads that you will need please click on the websites below. Good luck and have a nice day.
http://www.starbikeforums.com/forums/49-v-star/15953-rough-riding-after-storing-bike-carb-clean-didnt-seem-work.html
Carb sync Split from carb sync thread
http://www.yamahaventure.nl/pdf/servicemanualxvz13tf.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2006/LIT-11626-19-25%202006%20Venture_1193.pdf

Apr 21, 2014 | Yamaha Royal Star XVZ 1300 A Motorcycles

1 Answer

How do install a battery in a dirty bike


Clean it first with soap and water. Spray it with a hose to knock off any buildup of mud. That way it will be a clean bike instead of a dirty bike. Locate the battery and remove any fenders/plastics that keep you from having room to remove it. Keep track of everything you remove and where it goes. A magnetic pan is helpful for holding any nuts/bolts so you dont lose them. There may be a cover or strap that holds the battery in place.Remove it. Using a screwdriver ( a phillips head or a flat head depending on the bolt), disconnect the cables from the battery. The ground wire (the wire that runs to the frame and is connected to the battery terminal labeled "-") first. Disconect the hot wire ( the wire connected to the positive terminal on the battery labeled "+") next. Keep track of which wire is which. Remove the old battery and put the new battery in its place. Your new battery should be prepared/mixed beforehand. Connect the wires to the battery (the hot wire first) and secure it in place with whatever device that held the old one in place ( the strap or cover you may have removed). Replace all your fenders and you're done. Try to clean your bike consistently. No one likes a dirty bike. Hope this helps! Dont get hurt and wear proper safety attire. Handle batteries with caution and dispose of them properly. I am not responsible for any injuries you cause to yourself ( which i suspect you are susceptible to because you cant replace a battery).

Apr 02, 2012 | 2004 Honda CRF 450 R

1 Answer

Bmw k75c fuelpump fault &or remove


Hi, Tonyhickey52 if your bike has been sitting idle for months or years and you did not do any pre-storage maintenance I feel your pain it will probably have a dead battery and not want to start or if it starts it will idle and run poorly, here are the following steps necessary to complete in order to get your bike back to an acceptable running condition.
1. If your battery was 3 years or older when you last had the bike running you should replace it.
2. If you believe your battery might still be serviceable remove it from the bike and put it on a 1 or 2 amp trickle charger for 24 hours. If it is the old lead acid type with visible cells and acid levels fill each cell to the top line with distilled water and replace the caps, run the vent tube into a plastic or styrofoam cup, any cells that are cloudy/milky replace the battery.
3. After charging remove the leads and let the battery sit for a couple of hours then check the battery voltage with a volt meter, you should have 12.5 volts or better, any readings in the 11 volt range you need to do a proper load test on the battery and replace as necessary, any readings in the 10 volt range you have a dead cell and replace the battery.
4. Drain and flush fuel tank, google " how to clean a motorcycle gas tank" find a couple forums to view the different options available.
5. Remove your air cleaner and clean and re-oil per Mfg. specifications.
6. Remove the carburetor, disassemble and decontaminate with a carb dip or if you have EFI remove injectors and clean with carb spray and compressed air
7. Remove fuel valve and filter disassemble and clean as necessary, remove fuel lines and replace with new ones.
8. Replace spark plug with a new one and check for spark.
For more information about your issue please visit the websites below. Good luck and have a nice day.
BMW K75S fuel pump removal
BMW K75s restoration fuel tank clean and repair part 3 Fuel filter...
http://www.k100.biz/pdf/OFF/K100_K75_2V_eng.pdf
BMW Motorcycle Parts Fiche OEM BMW Motorcycle Parts online 1970 present BMW
K75 Rider Manual English PDF Useful to K100 owners as well BMW K75 K100 K1...

Jan 07, 2012 | BMW K 75 S Motorcycles

1 Answer

Trying to replace the battery in the lifefitness 9500 HR upright stationary bike, Can't seem to locate the battery in the bike If someone could tell me where the battery is located it would be...


Tilt the bike on its side, remove mounting screws securing the battery to the bracket. Remove the battery just enough to access and disconnect the black (neg) wire from the (-) terminal and the red (pos) wire form the (+) terminal. Replace battery and reverse procedure when installing battery hope this helps you and please vote for me

Dec 04, 2010 | Cycling

1 Answer

Our life fitness 9500hr recumbent bike stopped working


If this unit has not been used for that period of time then the 6v batt has died ans needs replacing call National Gym Parts @ 1-800-496-7278 to order part# LC001.5
HERE IS THE PROCEDURE TO REPLACE THE BATT:
Tilt the bike on its side, remove mounting screws securing the battery to the bracket. Remove the battery just enough to access and disconnect the black (neg) wire from the (-) terminal and the red (pos) wire form the (+) terminal. Replace battery and reverse procedure when installing battery

Apr 17, 2010 | Life Fitness 9500RHRT Recumbent Bike

1 Answer

Bike won't start clicking fromsoleniod when i try. I believe it's the starter. How do I remove the starter


Not yet, that particular bike takes a very strong battery to start it. Remove the battery and take it to an automotive parts house. They'll usually test the battery at no charge. If you have to replace the battery, I the Yuasa Yumacron battery is the only battery made for that bike. It's called a "T" battery because of the preculiar shape of the battery on the bottom.

Mar 30, 2010 | 2002 Honda VT 1100 C2 Shadow Sabre

1 Answer

BMW R1100RT 1999 model


The abs light flashes when the battery is not good, to replace the battery on your bike you must remove the seat, then the two black panals both sides of the bike, then remove the two side fairing panals then the belly pan, undo the bolt that holds the tank down, lift up the tank and there id the battery just remove and replace, hope tis can help

Jul 17, 2008 | 1999 BMW 318 ti

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...