Question about Yamaha XJR 1300 Motorcycles

1 Answer

My new 1300 xjr racer has done900 miles and between 4500 to 5000 rpm there is a site buzzing or vibration feeling in the foot pegs any ideas the shop I got it from said this was normal

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 39,959 Answers

Hi, Neil sadly people don't always tell the truth it is not normal and the usual suspects are:
1. Wheels and or tires worn or damaged.
2. Engine/transmission/vehicle not aligned properly.
3. Primary chain is badly worn or links too tight as a result of insufficient lubrication or misalignment.
4. Engine to transmission mounting bolts loose.
5. Upper engine mounting bracket loose.
6. Ignition timing incorrect due to a poorly tuned engine.
7. Internal engine problem flywheels have shifted.
8. Broken frame.
9. Stabilizer links worn or loose.
10. Rubber mounts loose or worn.
11. Rear fork pivot shaft nuts loose.
12. Front engine mounting bolts loose.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Engine Buzz Vibration
HELP Vibration Harmonic at slow trail speeds 5000 rpm
Yamaha XJR1300 2007 Service Manual
OEM parts for Yamaha
Yamaha XJR1300 Owner Manual

Posted on Apr 20, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vibration While Stopped at 1300-1800 RPM.


Was the Flywheel Machined?

Was the Flywheel Balanced?

Was the Balanced Flywheel & New Clutch Assy bolted
up & Balanced together?

Have to Balance Drive Shaft also

Dec 20, 2012 | 2004 Ford Mustang GT

1 Answer

PLEASE HELP please help 2006 yamaha yzf600r i have a problem ..... around 5000 rpm i get little tingeling vibrstions in the foot pegs handle bars and sometime in the tank i guess it like buzzing 5000...


Hi, Krisloba and the usual suspects are:
1. Wheels and or tires worn or damaged.
2. Engine/transmission/vehicle not aligned properly.
3. Primary chain is badly worn or links too tight as a result of insufficient lubrication or misalignment.
4. Engine to transmission mounting bolts loose.
5. Upper engine mounting bracket loose.
6. Ignition timing incorrect due to a poorly tuned engine.
7. Internal engine problem flywheels have shifted.
8. Broken frame.
9. Stabilizer links worn or loose.
10. Rubber mounts loose or worn.
11. Rear fork pivot shaft nuts loose.
12. Front engine mounting bolts loose.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
YZF600R Forums View topic Reduce engine vibration
Bad vibration between 5000 5500 RPM Smooth before and smooth after is this...
Yamaha YZF600 YZF600R 1994 2007 Service Repair Manual PDF Download Manuals...
OEM parts for Yamaha
Yamaha YZF600RP Owner Manual

Jul 20, 2011 | 1999 Yamaha YZF 600 R thunder cat

1 Answer

1999 Yamaha XJR 1300 tachometer goes to 2000 rpm when the ignition switch is turned on


Hi, Gary621 for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Tachometer stuck at 2000 rpm
Yamaha Tach bouncing the problem and the the fix
Yamaha XJR1300 99 Service Manual
OEM parts for Yamaha
YAMAHA XJR1300 Owner Manual

Oct 09, 2010 | 1999 Yamaha XJR 1300

1 Answer

Cbr 125r 05 vibration


Your camchain maybe worn resulting in chain slap when engine loaded when still cold, or some valve lap delay resulting in pinging or blowback. (coughing). A top end inspection may be required

This may effect the vibrations but is likely to be loose engine to frame mounts or loose steering head.

Check play of rear shock mounts top and bottom for any play. This would impact through the frame and tank, bars etc., but is more to do with road surface and speed.

Are the wheels balanced?

Thoroughly inspect ALL bolts (engine mounts, engine head bolts, pegs, handlebars, triple clamps, swingarm, exhaust header and muffler mounts) for tightness as vibrations are one or two steps away from tumbling down the tarmac. Vibrations are the main cause of bolts loosening......

Goodluck and Cheers.

May 12, 2010 | Motorcycles

1 Answer

Cbr 125r 05 vibration


this new exhaust has thrown the engine way out of tune, and the carbs need to be re-set up as the bike is now running very week,,,,you will burn a hole in a piston very soon if you dont re-tune it,,,this could also be causing some if not all of the vibration your getting, but check the sprokets are running true life the rear of the bike clear of the ground and spin the rear wheel if you feel or here a grinding sound its the sprokets not meshing with the chain also did you have the new tyer balanced when it was fitted???
this also causes vibration

Mar 19, 2010 | 2005 Honda CBR 125 R

1 Answer

My XJR 1300 vibrates thru the passenger footpegs. It only vibrates at 4000 to 4300 rom. It vibrates badly enough to put the passegers feet to sleep. Not a good look at the service station when they fall...


You might just have loose bolts...these could be engine mounts or the passenger footpeg bolts. Just do a simple check and see if you have any loose ones, it may solve your problem.

Dec 12, 2008 | 2004 Yamaha XJR 1300

1 Answer

My MT-03 is vibrating an making a bit of a tattling sound


Hi mattandem

I have replied already to your other post... didn't see this one... not sure what the vibration through the peg could be caused by as they mount directly to the frame. The frame being a substantial structure to the bike means that the vibration is being created anywhere on the frame,and you are feeling it in your foot peg. The only thing that comes to mind is that perhaps one of the tank mounting rubbers is not seated properly, or inadvertently rolled away on the garage floor. This is what I would be checking for.

regards
robotek

Dec 06, 2008 | 2008 Yamaha MT-03

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...