Question about Harley Davidson FLHR Road king Motorcycles
Hi, John for starters you may need a load equalizer for more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at firstname.lastname@example.org. Good luck and have a wonderful day.
XKGLOW POD LIGHTS INSTALL Harley Davidson Touring Workshop Service Repair Manual 1995 1996 $7 very cheap
Instant Tech Relief To speak with me personally absolutely "FREE"
Posted on Apr 21, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have had this same problem on two difference vehicles both of which are suburbans.
The solution is simple.
Remove the engine cover.
Locate a small ground wire that is bolted to the top rear of the engine block on the passenger side.
Remove the bolt, clean surfaces and replace.
This should solve your problem.
I know it seems too easy but it works.
Posted on Mar 02, 2009
It should be your brake light switch. There is a little plate welded to the arm of the pedal that has a hole with a rubber stopper. The rubber stopper is most likely missing, or damaged. You should be able to take a flashlight and see the plate and the switch. If the hole is plugged up, you will need the brake light switch, if not, replace the plug.
Posted on Jun 02, 2009
The chevys with red brake lights and turn signals do two things and I've fixeds alot of them. Looking at the tail lights with the hazard flashers on. both sides flash with nothingeles on? Or are the hazards yellow? if they're red and the third eye does work the turn signal switch is possible problem but it doesn't let the blubs and the circuit boards in the taillights out as they can fail and do some really bad stories the wires for the brakes and the turns and the hazards are the same ones and if the turns look right and the hazards look right then the turn signal switch transmites the turn too as this doesn't work part of your story can't be true
Posted on Aug 19, 2009
SOURCE: mk1 A4 ABS warning light
I have a 2000 Audi A4 and the break wear sensor warning light come on for me too. It does not flash and is orange in color. I have asked the Audi dealer twice about it and they told me it's because the previous owner put aftermarket break pads on it, thus messing up the sensors. I don't know about the ABS warning and other than that I wish you luck on it.
Posted on Dec 29, 2009
I had a similar problem like this with my 98 explorer once; neither brake lights worked and the top one stayed on very dimly at all times. It turns out both of my brake lights went bad at exactly the same time, which for some reason made the top light stay on. Felt like an idiot, but all I needed to do was change the bulbs.
Posted on Jan 06, 2010
Tips for a great answer:
Jan 01, 2014 | 2003 Harley Davidson FLHR Road king
Jun 16, 2013 | 2000 Harley Davidson FLHR-FLHRI Road king
Mar 24, 2012 | 2007 Harley Davidson FLHRC Road King...
Apr 14, 2011 | 2008 Harley Davidson FLHRC Road King...
Jul 23, 2010 | 2006 Harley Davidson FLHR Road king
Mar 09, 2010 | 2001 Harley Davidson FLHR - FLHRCI Road...
Nov 13, 2009 | 2008 Harley Davidson FLHRC Road King...
May 17, 2009 | 2000 Harley Davidson FLHR-FLHRI Road king
Apr 09, 2009 | 2000 Harley Davidson FLHR-FLHRI Road king
Jan 23, 2009 | 2006 Harley Davidson FLHR Road king
11 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: