Question about Honda CB 100 Motorcycles

1 Answer

Hi could u tell me were the TDC is on a honda gx340 power washer

Posted by on

  • shanecullen Jul 24, 2009

    thats great thanks very much for your time.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,129 Answers

Simplest way to determine this is to remove the spark plug, then remove the valve cover exposing the valve rocker arms, identify the intake valve this is done by noting its location in respect to the carburetor it should be the rocker arm closest to to the carb. After identifying the intake valve rocker arm observe it as you turn the motor over when you notice the arm moving downward the vakve is opening as it returns upward it is closing stop turing the motor over now take a drinking straw and insert it into the spark plug hole proceed to turn the motor over slowly you won't need to turn the motor over very much you will see the straw moving upward when it stops this is TDC firing stroke, if you are just using the pull start to turn over the motor you may go past TDC and have to do it over again since you do not have the ability to turn the motor back in the opposite direction, I would remove the pull start shroud so I could manually turn the motor over by hand (note always make sure you are familiar and note the rotation direction)allowing you to turn the the motor forward or backward when the straw stops moving up or down in relation to you turning the motor this is TDC take a marker and mark the flywheel and put a line mark somewhere on the engine case for future reference. There should be a factory line up mark somewhere on the engine case if there is not create your own.

Posted on Jul 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Honda gx340 is revving high all the time Can some one tell me y thank you


should be an internal govenor on a plant unit like that

...
there is a thicker than normal metal rod running off the carby to the motor and that is where you adjust the govenor

cant find good instruction how that governor is adjusted ..if adjusted the wrong way it will rev out may even throw a piston

then check carby idle adjustment
should hunt (rev up and down only slightly )as load changes
you tube
11hp Honda GX340 cold start
https://www.youtube.com/watch?v=i3_v68__X5o




Honda GX340 HGI Partsf21c43c2-def4-46c5-9224-ed46701c0c01.jpghonda-gx340-revving-high-all-time-some-qkhmqzcwln4tohiil4ndbnz4-2-2.jpg

Jun 22, 2016 | Honda Gx340 Gas Engine 11hp Motor Pressure...

1 Answer

What RPMis the max torque


the chart shows figures of 10.7 hp-8.0kw with a torque of 19.5 ft/lbs- 26.4nm at 2500rpms ( max net torque)
the chart shows gx390 is 11.7hp (8.7kw) but the torque is the same as the gx340
you can get these figures from world. honda com or by going google and typing in--torque range of honda gx 340 motor at max rpms
10 hp engines running at 2500 rpms will be good for gensets of 5kw continuous out put as most makes run that size engine

Apr 20, 2016 | Honda Gx340 Gas Engine 11hp Motor Pressure...

1 Answer

Have honda gx340 11hp pressure washer and gas keeps going into oil?


Excessive fuel entering the inlet manifold, carby needle and seat not shutting of fuel flow , remove and clean fit new gaskets and needle and seat if worn.

Jul 02, 2015 | Honda Gx340 Gas Engine 11hp Motor Pressure...

2 Answers

Pressure washer rope recoils to quickly when pulling to start


I'm sorry if I'm not quite understanding the question.

Are you saying the rope MAY be too short and so the amount of pull available is also shortened?

Feb 23, 2015 | Honda Gx340 Gas Engine 11hp Motor Pressure...

1 Answer

How to replace valve timing gear in honda gx340 engine


Align crankshaft and balancer gear first. Rotate crankshaft and align timing gear. Alignment mark may be hard to see on crankshaft for timinig gear.

Jul 09, 2012 | Honda Gx340 Gas Engine 11hp Motor Pressure...

1 Answer

I have a Honda GX340 power washer and would like to know what types of oil and quantities I need for the engine and pump


The Honda engine will use standard 30W. the pump will use 30W non-detergent.

Sincerely,
Aron Kerr
Landa Northwest
www.landanw.com

Mar 09, 2011 | Honda Pressure Washer PSI 3000

1 Answer

Motorturns over hard with pullstarter on my gx340 pressurewasher


You have a nice setup, lots of power. The honda gx340 has a compression release built into the engine so it should be relatively easy to start. With the pressure pump under load however, it will be very hard to pull the rope. With water connected hold spray gun open so water is running out tip and pull rope to start (for easy start, remove tip from gun) . If it still feels very hard to pull rope while holding gun open, most likely problem with lubrication in pump or engine valves are not adjusted correctly preventing compression release. If you suspect problem, go to store where you purchased the unit or any store that sells gx340 and pull the rope to get a feel of what force is required to start engine and compare to yours. Good luck.

Feb 15, 2011 | Honda Pressure Washer PSI 3000

1 Answer

I want to remove the 4gpm pump on my pressure washer.


HI, It sounds like it is just stuck on the keyway as these can be very tight. You need to force the pump of evenly on either side and should come of if patient.

Feb 05, 2010 | Honda Maxus Prosumer MX5223 Pressure...

1 Answer

Honda GX340 11 Hp ..Runs fine until it gets hot , Cuts off and


FIRST...check the engine oil level. Some Honda engines have an oil sensor that shuts off the spark if the oil is low. This would also explain it shutting down when it get hot. Check the manual to see how to tell if the oil level is correct. Also, the oil should be brown and transparent, not black. It may need changing. Post again if this doesn't help :-)

Jun 01, 2009 | Honda Pressure Washer PSI 3000

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...