No heat in any selection Kenmore Model 110.60612990

Kenmore Elite Electric Slide In Range 30 in. 41053 - Sears

www.kenmore.com/kenmore-elite-30inch-slide...electric-range...

Kenmore
Rating: 3 - ‎30 votes
The slide-in Kenmore Elite range 41053 has a true convection oven for faster pre. ...Kenmore Elite 30" Slide-In Electric Range w/ Convection - Stainless Steel ... Owners manual - English (Warranty) .... I called SEARS repair to look at my range and the repairman told me that this range has flaws with the oven fan and there is ...

Kenmore Elite 30" Double-Oven Slide-In Electric Range w

www.kenmore.com/kenmore-elite-30inch...slide...electric/p-02...

Kenmore
Rating: 3.5 - ‎30 votes
The exciting Kenmore Elite double-oven slide-in range 4111 offers all the feature. ... Versatile cooktop options include a 12-inch triple-ring element, a 9-inch Turbo Boil Flex™ element, and a ... Owners manual - English (Warranty) .... Ovens are both conventional or can be set to convection, my first bake was a cheese cake.

1. Kenmore Elite He3 Parts - searspartsdirect.com‎

   Adwww.searspartsdirect.com/Kenmore-Parts‎rating for searspartsdirect.com
   Shop Today at Sears PartsDirect™. The Largest Appliance Parts Seller.
   Ratings:Shipping 9/10 - Website 9/10 - Selection 9/10 - Quality 9/10
   
   • Dryer Parts
   • Washer Parts
   • Kenmore Parts
   • Water Filters

Search Results

MOTOR diagram for model # 41794130000 Kenmore-elite ...

www.searspartsdirect.com/model-part/41794130000/0583/.../00004.html
MOTOR Diagram and Parts List for KENMORE ELITE Dryer-Parts model # ... MOTORdiagram for model # 41794130000 Kenmore-elite-Parts Dryer-Parts (18).

PUMP AND MOTOR PARTS Diagram & Parts List for Model ...

www.searspartsdirect.com/model-part/11047789702/0583/.../00006.html
PUMP AND MOTOR PARTS Diagram and Parts List for KENMORE ELITE ... ANDMOTOR PARTS diagram for model # 11047789702 Kenmore-elite-Parts ...

This is an electric heated device?

Do you use fabric softener sheets in your machine? If yes, have you tried cleaning the sensor? Look on the back wall for a sensor. Check with Sears for specific instructions.

Ms. Harris,
If your unit is a bottom freezer and it is not freezing i.e warm, you more than likely have a sealed system issue. Check your warranty disclosure in your users manual. You may have Five years parts only on the sealed system.
Her is a tip: If you have American Express- Charge it . AMEX will mirror the manufacturers warranty.
Affordable Appliance Repair
Lake Forest, CA. 92630

I had the same oven for one and a half years and had the same problem. Had the sears repairman come out and he said the magnetron burned out and needed replacing for $285. It was never under warranty with the warranty that came with oven. I couldn't believe it! We had an independent repairman look at it and he found a design flaw that causes the magnetron to blow. If you replace the matnetron (megnatron?) it will work for awhile, maybe, but then just need to be replaced again. It's cheaper to buy a new microwave. In fact, I got out our old microwave that's over 20 yrs. old and still works--just isn't as fast and as new ovens. Good luck!

That model number's not showing up at the Sears site.

I would suspect that with everything you've said, it's the magnetron.

It should have a magnetron warranty of 5-9 years.

You may want to contact Sears Service to see.

Good luck.

Here are some links you or someone you know can use (in order given) for test help, but read the safety warnings first:

http://www.gallawa.com/microtech/diode.html (if it is NOT shorted, it's probably fine)
http://www.gallawa.com/microtech/mag_test.html
http://www.gallawa.com/microtech/xformer.html

There should also be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting & testing.

Your biggest suspects will be a bad connection or relay on the control panel, a bad connection on the magnetron terminals, a bad magnetron, a shorted high voltage rectifier diode or a bad high voltage transformer.

You can find exploded views and part numbers by entering your model number at the Sears parts site.

A full Sears/Kenmore model number has 3 digits, a dot, then 8 more digits, such as ###.########

You may be able to find better part prices than Sears here.

Your magnetron may have a 5-9 year warranty, so check your manual for that. Sears may send you a magnetron if it's bad and warranty.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

WHAT IS WRONG WITH YOUR RANGE / STOVE / OVEN?
http://www.repairclinic.com/SmartSearch/SmartSearch.aspx

Since it sounds louder than before, it is probably a bad high voltage diode or magnetron.

If it's within the magnetron portion of the warranty (usually 5-9 years) but out of the original full warranty (usually 1 year), then your manufacturer will cover the part cost, but not the cost to visit you or the labor charge to do the work.

Here are some links you or someone you know can use for test help, but read their safety warnings first:

http://www.gallawa.com/microtech/diode.html
http://www.gallawa.com/microtech/mag_test.html

Sears may send you a magnetron to install yourself since it's under warranty. For that or warranty service, contact Sears at http://www.sears.com.

You can save about $75 by taking it to the shop yourself, as opposed to an in-home service call.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

sound like a motor problem it does not have a resetable limit if it was over heating then it would blow the limit and it would not heat, or the blower limit if it sences overheating would not allow the machine to run at all
get ready for a new motor, or a new dryer
200 plus to replace the motor