Question about 2002 Ducati 750 SS

1 Answer

How often do the valves need doing on this model?

I have conflicting info on the frequency of getting the valves reseated on these machines, some say 10k others say 25k...can anyone confirm the fact so I dont kill my bike?

Cheers

Brent from New Zealand

Posted by on

  • hutchy33 Jul 24, 2009

    Thanks Buddy_J
    Ducati manual says to have the shims done every 15k, I may have misunderstood the issue, and in all honesty do not understand what the term means......(having only owned Suzukis and Honda's till now Ducati maintenance is a scary world)
    I hear a lot of urban myths surrounding Ducati servicing and of course the dealers back up what the service manual claims (coz its good coin). I bought the bike at 11,00kms in immaculate order and wish it to stay that way :)

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 101 Answers

Brent, valves don't need to be reseated unless they are worn, that will vary by mileage and use or abuse of the machine. I strongly suggest the purchase of a compression guage and start a log book, check compression of each cylinder at least every six months. Track the values in a log book, do it both 'dry' nothing injected into the cylinder and 'wet' a small squirt of light oil in the hole prior to attaching the guage. Do this with all plugs removed to prevent the engine from starting. Also while your in to the motor checking valve clearance will indicate wear over time. Depends on the make and model on how to adjust that clearance if at all.

Posted on Jul 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. I have a GE range model CGS985SET2SS. I need a new valve assembly due to over tightening the appliance connector hose. I see conflicting info on the web. Is WB19K10043 the correct part?


Hello. The valve, part designation 1600 on the exploded parts diagram is called a "lockout valve" and has the part number WB19K10059. It may cross-reference to another part number--that is common. The control valve, part designation 214 on the diagram is part number WB19K10079. I hope I helped you!

25807090-gjitcxjahx1lrasfp1beulhz-2-0.jpg

Aug 03, 2015 | GE Kitchen Ranges

1 Answer

I lost my remote so I need the remote code for a Sansui Model TVM1315C so I can program an insignia dvd/vcr combo remote instead.


get a universal remote it comes with the codes to program and you will not have any frequency conflicts

Oct 11, 2010 | Televison & Video

1 Answer

I just purchased an HP wireless Optical Mouse model: WE788AA I'm running XP. When I plug the 'adaptor' into the USB port, it is recognized by my system but then the mouse doesn't work. There are new...


Your mouse should use the standart windows mouse driver. It sounds like you might have a signal conflict. Check which frequency your mouse is using and check for other equipment using the same or similar frequencies. I had a similar problem with my wireless keyboard and mouse it was my wireless network interfering. Once you find out what the interference is you'll need to check your manuals or contact the manufacture to find out if you can change the frequency.

Jun 21, 2010 | HP Wireless Optical Mouse

1 Answer

Maytag washer leaks a lot of water during fill and spin cycle


If your machine type is not a FAV6800AW or FAV9800AW please disregard my post.

Can you determine if the water leak is coming from the Top Lid Assembly? If so you may want to reseat the Inner Lid Panel assembly. See the Service Manual page 32 Lid Disassembly/Removal. Follow to step 5 and then reseat the inner panel. Could also be hose connections from the Water Inlet Valve to the Detergent Dispenser Water Valve. See pages 35&36 for info.

You will have to release the washer top from the washer base to inspect those valve assemblies. See page 33 for the process steps. All this assumes you want to DIY the repair if not I would call in a repair service.

The Service Manual for reference. Sears Parts Direct for reference.

Post back if you have questions.

Rich

Oct 17, 2009 | Maytag Neptune FAV6800AW Top Load Washer

3 Answers

Aspire 5100 resource conflict - pci slot 3


Yuor RAM memory conflicts with each other check RAM memory fix same frequency memory into laptop.
Thanks for using fixya.

Jul 20, 2009 | Acer Aspire 5100 Notebook

3 Answers

Need code/s for LG WM1832CW to have washer do a spin/drain only


1. press POWER button to turn om.
2. press SPIN SPEED button only.
3. press START/PAUSE button/

May 02, 2009 | LG WM-1832C Front Load Washer

1 Answer

I have a Whirlpool top loading washer Model # LSR8233EQ0 that the water mixing valve needs to be replaced. How do you get to that valve? Do you remove the back of the machine or go from the front?


Do not remove the back.Take 2 screws off front ends of console and pull slightly forward and flip it up- it is hinged on the backPop off two spring clips that engage cabinet. Unplug lid switch wire. Tilt cabinet forward and the whole thing comes off. Thanks, please leave feedback or contact me again for more info if you need it.

Nov 29, 2008 | Whirlpool Calypso GVW9959K Top Load Washer

2 Answers

Reducing the noise when the washing machine is on spin cycle


Nothing is wrong w/ the unit. It must be solid on the floor with no movement in the feet relative to the flooring or it will rock when spinning. Floor is simply not solid enough. Use slower spin speed to alleviate issue or relocate it. Thanks, please leave feedback or contact me again for more info if you need it.

Nov 28, 2008 | LG Washing Machines

1 Answer

GE Model WBVH6240 washing machine


Might be the water inlet valve. It is located just behind where your water hoses attach to the washing machine. Pretty simple and inexpensive place to start. Shut off the water supply to the washing machine, disconnect the hoses, remove the small cover and you should be looking at the valve the hoses were attached to. Ideally, you should get the part from this site since they provided the money saving info. If you can't figure out part info, next choice would be your local (not big box retailer) appliance store. Just take in the valve and tell them what model machine you have and they should be able to help. There are many useful diagrams and instructions on the web if you need more specifics.

Apr 19, 2008 | Washing Machines

Not finding what you are looking for?
2002 Ducati 750 SS Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ducati Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Are you a Ducati Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...