Question about 2007 Suzuki GSX-R 1000

2 Answers

I tried to install a 12v socket so i could charge my phone while riding. I think I blew a fuse. The bike starts however the instrument panel doesn't light up. how can i fix this

Posted by on

  • 1 more comment 
  • carlosdunmoo Jul 23, 2009

    I don't have the owners manual

  • carlosdunmoo Jul 23, 2009

    I don't have a owners manual i need to know where the fuses are if that's is the problem

  • carlosdunmoo Jul 23, 2009

    I don't have a owners manual i need to know where the fuses are if that's is the problem

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

The fuse box should be located under, and in front of, the left handlebar.

A service manual can be found at the following website link
http://www.scribd.com/doc/284980/Suzuki-GSXR-1000-k5-K6-Service-Manual

Let me know if you have any further questions.



Benjamin

Posted on Jul 23, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,714 Answers

Check the owners manual for fuse panel location, check the fuses and change the blown fuse, it will be there, you will see it.

Posted on Jul 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2002 ford ranger running lights and instrument panel dont work


12V power passes through 15A fuse 33 (the one that keeps blowing?) in the battery junction box and on to the main light switch. When the main light switch is set to PARK, 12 volts is routed via the BRN lead to the park filaments of the dual park/turn lamps. These lights remain on when the headlight switch is turned to HEAD.

The main light switch gets its 12V input from 7.5A fuse 11 in the central junction box and the same 15A fuse (33) identified above. When the main light switch is set to PARK, 12 volts is routed via the BRN lead to the instrument panel dimming module and module output is applied to the panel illuminating lamps.These lights remain on when the headlight switch is turned to HEAD.

The input to fuse 33 is hot all the time so should read 12V. If you read 12V at the TAN/WHT connection with the fuse out, something is definitely not right. I'm sure you have noted that the fuse is common to the non-functioning circuits you mentioned.

Sep 14, 2012 | Cars & Trucks

1 Answer

I have a 07 suzuki gs 500 and was charging my battery using jumper cables and a running car (mistake) and while it was in neutral with a little choke... it died after 5 minutes or so. The engine lights...


As long as the Bike/Battery is a 12v system it shouldn't have been a problem. Hooking up something backwards IS a huge problem. Usually there is a main fuse near the battery. I would get a 12v automotive test light and start tracing the wire from the positive side of the battery along until you don't find voltage anymore..

May 02, 2011 | 2006 Suzuki GS 500 F

1 Answer

Bike engine light came on shut bike down wont start battery level is 10.6. Everytime I try to start the bike I get a code 0005 raw or so I think that's a code anyway. Any ideas what's wrong oh I checked...


Battery needs to be over 12v for the bike to start, with the bike running it will be about 14v
if you charge the battery and it wont hold 12v----new battery
If the bike starts and doesnt show 14v aprox---- new regulator

Apr 11, 2011 | Ducati Monster 696 Motorcycles

1 Answer

2009 Yamaha MT 03 blew the main 10amp fuse it stopped & all instrument lights went out. I changed the fuse it was ok. I rode apr 4 miles stopped for a few minuets then started it again rode it for...


i had to run a inline fuse on my bike with a 15 amp fuse, but there is a short somewhere. check all connections at solenoid make sure nothing is touching

Mar 18, 2011 | Yamaha MT-03 Motorcycles

1 Answer

Triumph Trophy 1200.... The battery is drained of power, so much that while I am riding it at hwy speed the bike shuts down. I have a trickle charger on the battery making sure it is fully charged before...


You have a pretty heavy drain on your battery. Find the fuse box. Remove all the fuses. With volt/ohm meter, read each fuse socket to find which one is drawing the power - when you find it ... investigate the circuit to find the short.

It may be that you are not making power ... your rectifier may be shorted which not only prohibits charging ... in some circumstances, it will actually cause a short to ground.

Jul 05, 2010 | 2002 Triumph Trophy 1200

3 Answers

I have a 91 fzr 600 recently did oil change, spark plugs,didnt ride bike for 2 days then went to ride it today and wont start, thought it was the battery so i jumped it and it started but started running...


you will need to try a new battery, unfortunatly sometimes jumping of a larger battery can spike the regulator, so when the new battery is fitted put a mulimeter across the battery, should read just over 12v engine stopped and rise to 13.5-14v with the engine running.

Jun 10, 2010 | 1991 Yamaha FZR 600

1 Answer

I was out riding yesterday when all of a sudden my bike died all the electrics went! its a 1995 cbr 600f main fuse blew and the voltage regulator was boiling and the rubber encasing the circuits had peeled...


the regulator only keeps the voltage regulated to about 13v charge for the battery no matter what speed you ride..if the regulator did not work correctly you might start to burn out light bulbs. So when you put in the new regulator make sure your battery is at least at 12.3v minimum if not you will have to push start it and ride it for about 15 minutes on an open highway to charge the battery back up to at least 12.6v-12.7v...13v is perfect. (if none of your other fuses blew then all other electrics should work), so i would double check all of your fuses just to make sure.

Apr 26, 2010 | 1995 Honda CBR 600 F(3)S

1 Answer

The Instrument panel lights no longer work. When I started it at night it was fine for a minute. When I plugged in my cell phone charger in the AUX lighter spot, there was a noise and the instrument panel...


Sounds to me like your cell charger is shorted so the fuse that sends power to the lighter socket blew and the dash lights are on the same circuit. Check all the fuses to make sure the tiny piece of wire between the two contacts is still intact and replace any bad ones with the SAME SIZE and AMP RATING fuse. Then, hope for the best and throw away the cell phone charger if all is well in the car.

Sep 22, 2009 | 2000 Chevrolet Impala

1 Answer

Instrument Cluster needles stuck -- Electrical Problems


Needles stuck indicative of instrument cluster complete failure. Cause unknown. This is second instrument cluster that has failed on this bike, first one failed at about 3000 miles, twenty-two months ago. This "new" one died in mid May 2008. Received word from Ducati North America that they will accept the warranty claim for the toasted instrument cluster!!! Am still concerned about cause...this is second instrument cluster for this S2R800. Seems to be an issue prevalent on some of these late model Monsters. Will update more after instrument cluster gets in and replaced by Bloodworth Ducati in Nashville.

Nov 20, 2008 | 2004 Ducati SS800

Not finding what you are looking for?
2007 Suzuki GSX-R 1000 Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...