Hi
If its the handle bar grip you are referring to, they are a slide on fit... can take some initial leverage to get them off, go carefully and prise it away.
regards
Graeme
I have a 2008 m800 intruder, fuel injection model, the engine is very snatchy when i shut the...
(More)
I have a 2008 m800 intruder, fuel injection model, the engine is very snatchy when i shut the throttle or drive about 50mph or less, it is as if the engine is intermitently being starved of fuel, ie keeps missing beats
tested with light and is throwing off weak signal does the pump need more juice maybe also checked...
(More)
tested with light and is throwing off weak signal does the pump need more juice maybe also checked fuses one for fuel was blown, replaced it and noticed the weak test light just doesn't seem to be working. does the pump have any type of sensors?
I've taken all the bolts out of the clutch cover and the small cover to rhe rear of it but it seems...
(More)
I've taken all the bolts out of the clutch cover and the small cover to rhe rear of it but it seems like the the cover is being held on by the shaft that the heel and toe shifter is mounted on. Is this the only thing left holding the cover on?