Question about 1988 Honda CBR 600 F Hurricane

1 Answer

Need front fairing - 1988 Honda CBR 600 F Hurricane

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Of course try ebay and keep checking back since new posts appear all the time. also google "race plastics" for your bike and you might find a set of race plastic you can use and cut out the headlight area and plastic weld headlight mount tabs into it. lastly, google some the huge salvage yards and ask them to search for one of they dont have one already...many of the big dismantlers are on a nationwide intranet and they can out up a request to fellow salvage yards around the country to help you out. good luck and the cbr 600 cane was always one of my faves !!

Posted on Jul 22, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to remove cowling on 250 yamaha xmax

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $10 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha XMax 250 Cockpit Fairing front front Fairing Cowling eBay
OEM parts for Yamaha
Yamaha XMAX 250 YP250R Owner Manual
Yamaha Max 250 2011

Feb 21, 2012 | 2011 Yamaha XMax 250

1 Answer

Need to take off fairing on 2004 FLHT standard were are mounting points

on the side of the forks, u have to remove the front of the fairing to get to them. there are several torx screws on inside fairing to remove then carefully lift from bike.

Aug 25, 2010 | 2004 Harley Davidson FLHT - FLHTI Electra...

1 Answer

Do I need to remove my fairing to replace the headling bulbs?

Hi there,

well you can please follow the below steps -

Remove the Fairing - 1. Unscrew all seven outer fairing fasteners using a Torx driver. These screws are located on the inner fairing near the windshield, the speakers, and the handlebar clamps.
2. Stand in front of the motorcycle. Tilt the outer fairing toward you and hold it firmly. Reach in and disconnect the wire connectors for the headlight assembly by hand.
3. Move the fairing to a work bench to continue the procedure.

Change the Headlights - 1. Remove the wire harness connectors from the back of each headlight that need replacement. Turn the plastic retainer counterclockwise by hand to remove each bulb from its housing.
2. Install the new headlight bulb or bulbs, with each bulb's wider ears on the bulb back plates oriented toward the top. Screw in the plastic retainer rings by hand.
3. Connect the headlight wire harness connectors to the back of each headlight.
4. Move the fairing back to the motorcycle. Reinstall the fairing, battery and seat in reverse order.
Please post comments if you need more help or information.........

Good Luck!!


Mar 17, 2010 | 2004 Harley Davidson FLTRI Road Glide

1 Answer

Mirror removal

i belive it is a 8or10mm socket that is needed. Remove the two nuts from the back side of the front fairing the turn signal wire routes behind the fairing on to of the fairingstay. find the connector and disconnect the pull mirror off pulling the wire through the fairing hole should take no more than ten mins for both.

Dec 14, 2009 | 2008 Suzuki GSX-R 600

1 Answer

Wrecked 07 GSXR1000. upper front damage, missing right and left fairing, speedometer, and broken left clip on. everything else fine. i need a parts list necessary to just install speedometer and race... If racing only I would not waste time/weight on a speedometer, use a tachometer only. But you can try for generic will fit parts. The airtech site has factory type and race only fairings and can suggest brackets needed. You can also try e-bay for a complete fairing setup w/ decals, will be the least expensive, and lighter weight than factory.

Dec 13, 2009 | 2007 Suzuki GSX-R 1000

2 Answers

Need front brake pads and rotors for a 1999 malibu . how much is a fair price to pay

approximately 1.2 - 1.5 hours labor, approximately $250 - $300 for quality parts.

Dec 02, 2009 | 2000 Dodge Stratus

1 Answer

Need schematics of Z1R fairing area

654f298.jpgSending just the front since you wanted the fairing area, I have the other half if you need it, good luck.

Nov 14, 2009 | 1973 kawasaki Z1

1 Answer

My 2000 Pontiac Montana van needs the two front control arms replaced. I was quoted $637. Is this a fair estimate?

Thats a very fair estimate.

Tha job requires 1.8 hours per side and a front end alignment.

Aug 27, 2009 | 2005 Pontiac Montana SV6

1 Answer

Front indicators

Removing the indicators is a simple process involving the removal of the fairing to unclip and unplug them from the fairing. The plastic press studs that hold sections of the fairing in place are prone to breaking when you remove them but are easily obtained from your local Yamaha dealer and inexpensive.

Jun 21, 2009 | 2008 Yamaha YZF-R6

2 Answers

Falco fairing question.

and need the small black plastic panels that bolt onto the bottom of the fairings I tried but cant find any diagram with these panels ....! What are they called and where can I buy them ? ,Its called Lower fairing, black You can find it under Genuine Aprilia Front body - Front mudguard spare parts for SL 1000 Falco . Look up part number 5 Here it is at AF1 listing . Part number AP8158773. Aprilia Yorkshire list its for 47.18 pounds __________________ ,,,

Nov 10, 2008 | 2002 Aprilia SL Mille Falco R

Not finding what you are looking for?
1988 Honda CBR 600 F Hurricane Logo

Related Topics:

504 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 3 Expert

77202 Answers


Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides