Question about Kymco Motorcycles

1 Answer

White paint code for 2013 kymco downtown 300i motorscooter

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Kymco Master
  • 48,614 Answers

Hi, Brian for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Anyone found touchup paint yet
Metallic Paint Kymco Motorcycles Scooters
KYMCO Downtown 200i Service Manual
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
http://www.kymcousa.com/owners/onroad/Downtown-300i-Owners-Manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Jan 06, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2013 Kymco Downtown 200i loss of power


Hi, Adams and the usual suspects are:
1. Dirty or clogged air filter.
2. Faulty spark plug.
3. Bad Gas.
4. Improper oil level.
5. Improper chain adjustment and lubrication.
6. Low tire pressure.
7. Dirty or contaminated carburetor needs cleaning and tuning.
8. Clogged or faulty fuel pump or injectors.
9. Improper valve adjustment.
10. Slipping clutch.
11. Improper timing.
12. Low compression.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Help moped starts but has no take off power
scooter losing power under acceleration
KYMCO Downtown 200i Service Manual
http://kymco.com.mk/katalog_delovi/DOWNTOWN%20200i.pdf
KYMCO Downtown 200i Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


May 11, 2018 | 2013 Kymco Downtown 200i

1 Answer

I have a 2010 kymco downtown 300i there a light on the dash says mett in and its lit up


Hi, Michael the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
KYMCO DOWNTOWN 300 WORKSHOP MANUAL Download Manuals Technical $15
Kymco DOWNTOWN 300 ABS Parts
KYMCO downtown 300i Owner Manual
Kymco Downtown 300i 2011
https://it.wikipedia.org/wiki/Kymco_Downtown

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sep 08, 2017 | 2010 Kymco Downtown

1 Answer

Kymco downtown 300i oil light stay on and won't start


Hi, Michael and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day
Downtown 300i Won Turn Over
http://meiguohosting.com/How-to-fix-start-problem-for-your-2011-Kymco-Downtown-300i
KYMCO People GT 300i Service Manual
Downtown 300i Kymco Scooter Parts Racing Planet USA
KYMCO downtown 300i Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 26, 2017 | 2013 Kymco Downtown 300i

1 Answer

How to open seat with a dead battery on a 2013 Kymco Downtown 300i


Hi, Mickey for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
downtown seat latch
Kymco Downtown 300i battery removal and look at the engine
KYMCO People GT 300i Service Manual
Kymco DOWNTOWN 300 ABS Parts
KYMCO downtown 300i Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jun 13, 2015 | 2013 Kymco Downtown 300i

2 Answers

No spark from coil


charge the battery fully it may not have enough charge to start, you could jump start it with a battery or a car but not a running car, they put out 16 volts and will fry the electrics,

Jul 28, 2014 | 2011 Kymco Downtown 300i

1 Answer

No spark from coil


check cableling and fuses

Jul 28, 2014 | 2011 Kymco Downtown 300i

1 Answer

What is the top speed


my top speed is 150 kmh. ( 94 mph. ) I seen one from Germany his top speed was 182 kmh. don't know what he did to do that,. at 8,000 rpm that's on the speedometer, not true speed ,.I have had mine up to 8,000 rpm and only 150 kmh. he must be going down hill,. I did it only for 1/2 mile don't want to loose my lic.

Apr 23, 2014 | 2014 Kymco Downtown 300i

1 Answer

12v power outlet fuses


the fuse is under the front plastic cover take it off and install a dash mount fuse in the glove box, beside the outlet plug it has # 20 wire in there, ask electrition how big a fuse you can put in there, or install wire from the battery with # 12 wire, and close the small wire off,

Mar 31, 2014 | 2012 Kymco Downtown 300i

1 Answer

Reset the trip meter


Hi Anonymous, for more information about your question please visit the website below. Good luck and have a nice day. Honda CBF 125 Tripmeter Reset
How to quickly reset trip meter on DRZ400SM
07 Suzuki Burgman 400 How to reset oil change indicator light
kymco downtown 300i reset
Piaggio X9 Service Reset Oil Belt Rckstellung

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e






Jan 27, 2014 | Bajaj Motorcycles

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco Experts

yadayada
yadayada

Level 3 Expert

80608 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4988 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...