Question about Motorcycles

1 Answer

30amp fuse for cpm keeps blowing light tested one side of fuse still hot other side not

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Motorcycles Master
  • 47,843 Answers

Hi, Anonymous I would love to help you but I can't believe the batteries in my crystal ball are dead and my mental telepathy headset is broken. I need the year, make, and model of your motorcycle please click on the word "COMMENT" below and provide this information in the box that will open and then click on the green comment box in the bottom right-hand corner after it posts I will receive an "ALERT" icon that will allow me to respond to your information. Good luck and have a nice day.

Posted on Jan 01, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Ninja 650R main 30amp fuse keeps blowing even with bike turned off (takes 3 minutes with bike off for it to blow). Been threw 3 new fuses and cant located the issue. Please advise me what to do?


Hi, Sheridan before diagnosing your blown fuse issue, check the bottom of your seat, if its metal and comes in close proximity to the positive battery post you need to take the necessary steps to ensure there is no contact (electrical tape, thick rubber insulation, hammer a dent in the seat bottom etc.) You are going to need a wiring diagram from your service manual, a test light, an ohmmeter and plenty of extra fuses.
If you turn on your ignition switch and immediately blow a fuse you have a hard/dead short and is usually easy to find. With a test light connected to the hot side of the blown fuse holder start stabbing the wire/s that leads away from the fuse holder and towards the ignition switch, you test light will illuminate validating the short. When the test light fails to illuminate you have passed the short and need to back up until the test light illuminates, then look in the immediate area for the short.
If you driving down the road for 30 minutes or 15 miles and blow a fuse you have soft/flying short and may take some time and patience to find.
If the main fuse/circuit breaker constantly blows/trips while riding you probably have a faulty battery terminal connection. Check battery terminals for damage or corrosion, check battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary. Any other fuses that constantly keep blowing while riding are usually caused by a loose or corroded ground wire in the circuit, which means you have to check, inspect, test each and everyone with an ohm meter set on a low ohm scale 100 ohms or less . Simply touch one lead to the ground source and the other lead to the battery negative terminal, a reading of zero indicates a clean solid ground. Any number reading or infinity indicates a poor ground and needs to be repaired. Poor or weak grounds require excessive additional amperage to complete the circuit which in turn blows the small amperage fuse.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Ignition and Main ECU fuses keep blowing
Kawasaki Motorcycle Wiring Diagrams
Kawasaki Ninja 650R Service Manual
OEM Parts for Kawasaki
Kawasaki 2009 ER 6f Owner Manual

Oct 10, 2017 | 2009 kawasaki Ninja 650R

1 Answer

Why does my 2005 Yamaha keep blowing the o2 sensor fuse? just replaced the sensor and that didn't fix. it. Thank you for your time.


Hi, Jack you have a dead short which is usually the easiest to find. Using a test light connected to the hot side of the blown fuse holder, start probing the wire leaving the fuse holder about an inch away the test light should illuminate, keep probing towards the ignition switch until the test light no longer illuminates you are now very close to the short. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Blown Oxygen Sensor Fuse Electrical
Will bad O2 Sensor cause the fuse to blow
ignition fuse in motorcycle keeps blowing fixit
Keep blowing Fuse 01 CBR600F4i Honda Motorcycles FireBlades org

Apr 13, 2016 | Yamaha Motorcycles

1 Answer

Battery died and blew both fuel and ignition fuses, replaced them both and put in another battery , soon as connect battery the fuel fuse keeps blowing,, Suzuki Boulevard


Hi, Mark you have a dead short which is usually the easiest to find. Using a test light connected to the hot side of the blown fuse holder, start probing the wire leaving the fuse holder about an inch away the test light should illuminate, keep probing towards the ignition switch until the test light no longer illuminates you are now very close to the short. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Fuse Blowing for Instrument panel 08 FLXH Harley Davidson Forums
Keep blowing Fuse 01 CBR600F4i Honda Motorcycles FireBlades org
gauge cluster fuse keeps blowing
99500 38047 03E pdf

Mar 27, 2016 | Suzuki Motorcycles

1 Answer

I have a 1994 yamaha fzr600r, theres a 7.5amp fuse that keeps blowing, it's in the fuse box on the left side with the main 30amp what's the fuse for?


Hi, Jonathan you have a dead short which is usually the easiest to find. Using a test light connected to the hot side of the blown fuse holder, start probing the wire leaving the fuse holder about an inch away the test light should illuminate, keep probing towards the ignition switch until the test light no longer illuminates you are now very close to the short. For more information about your issue, please visit the websites below. Good luck and have a nice day. https://www.tradebit.com/filesharing.php/search/0/1994+yamaha+fzr600r

Jul 27, 2015 | Yamaha Motorcycles

1 Answer

Fuel pump fuse blowing on 2006 Yamaha royal star


Hi, Anonymous you have a dead short which is usually the easiest to find. Using a test light connected to the hot side of the blown fuse holder, start probing the wire leaving the fuse holder about an inch away the test light should illuminate, keep probing towards the ignition switch until the test light no longer illuminates you are now very close to the short. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Fuel Pump Fuse keeps instantly blowing
Fuel pump fuse keeps blowing help
http://www.yamahaventure.nl/pdf/servicemanualxvz13tf.pdf
OEM parts for Yamaha
http://www.yamahaventure.nl/pdf/ownersmanualxvz13tf.pdf

Apr 08, 2014 | 2008 Yamaha Royal Star Venture

1 Answer

V star 1100 headlight fuse blows repeatedly


Hi, Anonymous you have a dead short which is usually the easiest to find. Using a test light connected to the hot side of the blown fuse holder, start probing the wire leaving the fuse holder about an inch away the test light should illuminate, keep probing towards the ignition switch until the test light no longer illuminates you are now very close to the short. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.starbikeforums.com/forums/49-v-star/2280-headlight-fuse-keeps-blowing.html
Re Grrr Headlight keeps blowing fuses Road Star Forum Yamaha Road Star
Newbee Star 1100 keeps blowin fuses
http://www.sloneservices.com/SilverBack/Other-Stuff/V-StarShopManual99-07.pdf

Jan 31, 2013 | Yamaha V Star 1100 Classic Motorcycles

1 Answer

The 30 amp fuse on my bikes solenoid keeps blowing


Hi you have a grounded wire remove the fuse use a ohm meter or battery powered test light test the outgoing lead and to the frame if it lights up or registers on the meter backtract to see if the wire is grounded insulation worn off or pinched on the frame.

Jan 10, 2013 | Honda Deauville NTV 650 Motorcycles

1 Answer

2001 Honda Deauville NTV 650 keeps blowing the main 30 amp fuse


Hi, Scott before diagnosing your blown fuse issue, check the bottom of your seat, if its metal and comes in close proximity to the positive battery post you need to take the necessary steps to ensure there is no contact (electrical tape, thick rubber insulation, hammer a dent in the seat bottom etc.) You are going to need a wiring diagram from your service manual, a test light, an ohmmeter and plenty of extra fuses.
If you turn on your ignition switch and immediately blow a fuse you have a hard/dead short and is usually easy to find. With a test light connected to the hot side of the blown fuse holder start stabbing the wire/s that leads away from the fuse holder and towards the ignition switch, you test light will illuminate validating the short. When the test light fails to illuminate you have passed the short and need to back up until the test light illuminates, then look in the immediate area for the short.
If you driving down the road for 30 minutes or 15 miles and blow a fuse you have soft/flying short and may take some time and patience to find.
If the main fuse/circuit breaker constantly blows/trips while riding you probably have a faulty battery terminal connection. Check battery terminals for damage or corrosion, check battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary. Any other fuses that constantly keep blowing while riding are usually caused by a loose or corroded ground wire in the circuit, which means you have to check, inspect, test each and everyone with an ohm meter set on a low ohm scale 100 ohms or less . Simply touch one lead to the ground source and the other lead to the battery negative terminal, a reading of zero indicates a clean solid ground. Any number reading or infinity indicates a poor ground and needs to be repaired. Poor or weak grounds require excessive additional amperage to complete the circuit which in turn blows the small amperage fuse.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
30 amp main fuse keeps blowing
Deauville Owners UK
HONDA NT650V DEAUVILLE BIKE WORKSHOP SERVICE REPAIR MANUAL Download... $15
https://www.partsfish.com/page/oem-parts-for-honda
Honda NT650 Owner Manual

Nov 01, 2017 | 2001 Honda Deauville NTV 650

1 Answer

1982 Honda Nighthawk 650 keeps blowing the main 30amp fuse


Hi, Searay185spo before diagnosing your blown fuse issue, check the bottom of your seat, if its metal and comes in close proximity to the positive battery post you need to take the necessary steps to ensure there is no contact (electrical tape, thick rubber insulation, hammer a dent in the seat bottom etc.) You are going to need a wiring diagram from your service manual, a test light, an ohmmeter and plenty of extra fuses.
If you turn on your ignition switch and immediately blow a fuse you have a hard/dead short and is usually easy to find. With a test light connected to the hot side of the blown fuse holder start stabbing the wire/s that leads away from the fuse holder and towards the ignition switch, you test light will illuminate validating the short. When the test light fails to illuminate you have passed the short and need to back up until the test light illuminates, then look in the immediate area for the short.
If you driving down the road for 30 minutes or 15 miles and blow a fuse you have soft/flying short and may take some time and patience to find.
If the main fuse/circuit breaker constantly blows/trips while riding you probably have a faulty battery terminal connection. Check battery terminals for damage or corrosion, check battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary. Any other fuses that constantly keep blowing while riding are usually caused by a loose or corroded ground wire in the circuit, which means you have to check, inspect, test each and everyone with an ohm meter set on a low ohm scale 100 ohms or less . Simply touch one lead to the ground source and the other lead to the battery negative terminal, a reading of zero indicates a clean solid ground. Any number reading or infinity indicates a poor ground and needs to be repaired. Poor or weak grounds require excessive additional amperage to complete the circuit which in turn blows the small amperage fuse.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1982 Nighthawk CB650SC SOHC Electrical Problems Sugar Land TX
Keep blowing main fuse any ideas
Honda CB650 Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CB650 Custom Owner Manual

May 11, 2012 | Honda Motorcycles

1 Answer

1999 Honda CBR 600 F(4)X keeps blowing the main fuse


Hi, Robert before diagnosing your blown fuse issue, check the bottom of your seat, if its metal and comes in close proximity to the positive battery post you need to take the necessary steps to ensure there is no contact (electrical tape, thick rubber insulation, hammer a dent in the seat bottom etc.) You are going to need a wiring diagram from your service manual, a test light, an ohmmeter and plenty of extra fuses.
If you turn on your ignition switch and immediately blow a fuse you have a hard/dead short and is usually easy to find. With a test light connected to the hot side of the blown fuse holder start stabbing the wire/s that leads away from the fuse holder and towards the ignition switch, you test light will illuminate validating the short. When the test light fails to illuminate you have passed the short and need to back up until the test light illuminates, then look in the immediate area for the short.
If you driving down the road for 30 minutes or 15 miles and blow a fuse you have soft/flying short and may take some time and patience to find.
If the main fuse/circuit breaker constantly blows/trips while riding you probably have a faulty battery terminal connection. Check battery terminals for damage or corrosion, check battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary. Any other fuses that constantly keep blowing while riding are usually caused by a loose or corroded ground wire in the circuit, which means you have to check, inspect, test each and everyone with an ohm meter set on a low ohm scale 100 ohms or less . Simply touch one lead to the ground source and the other lead to the battery negative terminal, a reading of zero indicates a clean solid ground. Any number reading or infinity indicates a poor ground and needs to be repaired. Poor or weak grounds require excessive additional amperage to complete the circuit which in turn blows the small amperage fuse.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Blowing the main fuse help CBR Forum Enthusiast forums for Honda CBR Owners
http://www.fireblades.org/forums/honda-cbr400rr/87007-main-fuse-blowing-instantly-all-time.html
Honda CBR600F4I 2001 Service Manual
Honda Motorcycle Wiring Diagrams
https://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600F4i Owner Manual

Mar 13, 2012 | 1999 Honda CBR 600 F(4)X

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4825 Answers

yadayada
yadayada

Level 3 Expert

79123 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...