Question about Motorcycles

1 Answer

My bike wont drive when in gear?

Honda nsr 125 jc22 2002 just came to a stop

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Sounds like the clutch is toast though it could be other things assuming its not just stuck ie does the clutch lever return after you press it, if so you could try draining the oil out and pass it through a sieve, if there are bits of friction plate in it then the clutch has definatley disintegrated, if the lever stays in then the push rod may be damaged/stuck or the worm drive may be stuck. does the bike go into gear without pressing the clutch lever or stalling?, if the clutch was slipping prior to it stopping then this is likely a knackered clutch, it could also be the wrong oil in the gearbox or perhaps no oil in the gearbox, does the bike go into gear? does it go through all 6 gears and into neutral? more info is needed and even then without looking its hard to say but my guess would be the clutch is fried

Posted on Dec 31, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I put my Honda nsr 125 on a warm up after a warm up revved up then it cut &won't start back up , iknow the power valve servo has gone paid for one , has had new spark plug and air filter does spark


Hi Anonymous, and the usual suspects are:
1. Enrichner system plugged, not properly functioning or improperly operated.
2. Fuel overflow.
3. Restricted fuel supply.
4. Gas cap and or fuel tank not venting properly.
5. Plugged slow jet or passages.
6. Inlet system air leak.
For more information about your issue please visit the websites below. Good luck and have a nice day.
Honda NSR 125 won't start after cold Xmas
My Nsr 125 Wont Start Please Help
1988 1994 Honda NSR125 Service Manual Moto Data Project
http://www.vol-training.com/guides/honda-nsr-125-parts-manual.pdf
Honda nsr 125 Owners manual

Jan 02, 2016 | Honda Motorcycles

1 Answer

2000 Honda NSR 125 CDI


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2000 Honda NSR 125 CDI Google Search
Honda NSR 125 CDI Maybe
https://drive.google.com/file/d/0B0RumHmTXc75ZDE2NDcwNDItYjdlMi00NDdmLTkwOTAtYzJiOWI5YWEyZDVj/view?hl=en_US
http://www.partsfish.com/page/oem-parts-for-honda
http://mybikemanuals.com/honda

Aug 06, 2013 | 2000 Honda NSR 125

1 Answer

2000 Honda NSR 125 will not shift


Hi, Anonymous and the usual suspects are:
1. Clutch not disengaging.
2. Bent shift shaft.
3. Shift fork bent or seized.
4. Gear seized on the shaft.
5. Gear positioning lever binding.
6. Shift return springs weak or broken.
7. Shift return spring pin loose
8. Shift mechanism arm spring is broken.
9. Shift mechanism arm is broken.
10. Shift drum is broken.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Honda Nsr 125 problem with gears
SHIFT DRUM SHIFT FORK NSR 125 NSR125RY 2000 ITALIA NSR125RY Genuine Honda...
https://drive.google.com/file/d/0B0RumHmTXc75ZDE2NDcwNDItYjdlMi00NDdmLTkwOTAtYzJiOWI5YWEyZDVj/view?hl=en_US
http://www.partsfish.com/page/oem-parts-for-honda
http://mybikemanuals.com/honda/honda-ns-owners-manuals

Jul 31, 2013 | 2000 Honda NSR 125

1 Answer

Bike wont start from the button


try pulling the choke when you start with a little gas, if i remember right the NSR has a carb & choke right?

Oct 25, 2012 | 2001 Honda NSR 125 R

1 Answer

Hi i have a 1990 honda nsr 125 with the twin round headlight i beleve it is de restricted as it accelerate up to 11000 rpm 80 mph but once you get in to top gear 6 it slows down and i have trouble getting...


lol sorry to be the bearer of bad news but its still restricted most likely factory unless its second hand and restrictor kit was put in then would take a mechanic to get to the restrictor also stop driving the bike so hard is only a 2 and while do it damage if ya keep driving it so hard low gear driving will wreck your 2 stroke but best of luck in the future drive easy bud

Mar 05, 2011 | 2000 Honda NSR 125

1 Answer

2003 Honda NSR 125 transmission rebuild


Hi, Stowy_1 the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Honda 2 Stroke Bottom End Rebuild Part 1
Motorcycle Bottom End Rebuild Part 2 of 3 Crank Bearings
Honda CR125R 2006 Owner Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CR 125R 2002 Sevice Manual

May 27, 2017 | 2001 Honda NSR 125 R

1 Answer

I have a pipe coming from the engine and when the bike is running it laeks gearbox oil. can you over fill it and thats an over flow pipe??? or is it something else?? please help. thanks. HONDA NSR 125


yes its an overflow pipe, its a breather pipe for the crankcasing as well, happened to me from putting to much oil in the gear box. should stop but to be sure keep and eye on the the level indicator on the gear box case.

May 13, 2010 | 2000 Honda NSR 125

1 Answer

Nsr 125 problem


It may be a safety switch in the clutch lever or bike stand switch being a bit sticky or broken wire in the wiring harness near the steering head that bends alot.

Apr 25, 2010 | 2000 Honda NSR 125

1 Answer

I cant find the fuse box on my 96 nsr 125 rr, help?


you can down load one here for free,it takes a while to load,lots of bikes.
http://www.carlsalter.com/motorcycle-manuals.asp

Jan 10, 2010 | 2000 Honda NSR 125

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...