Take off the 4 bolts on the head after you unplug the spark plug. then take out the c clips that are on the side of the piston where it connects to the crank oh ya if the cylinder wall is scarred then you will need to repair or replace it, but if not then keep following after you take out the clips the piston should come off im assuming you bought a rebuild kit now take the new piston and place the ring(s) on it then put the piston on the rod then slide the shaft inside the piston then put the new c clips on each side then place the cylinder on top of the piston (you will have to clamp the rings together with a special tool but if you dont have it your fingers will work fine then after you get the cylinder on you can put the bolts back in place then the spark plug wire and remember to break in the new top end by driving in first gear for a few hours.
280 views
Usually answered in minutes!
×