Question about 2000 Honda VFR 800

1 Answer

2000 Honda, VFR 800. Clutch began to slip when in gear, sometimes worse than others. One time clutch would not engage at all, had to tow. At home with engine cool, clutch worked fine. Clutch springs?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Honda Master
  • 48,033 Answers

Hi, Daniel and the usual suspects are:
1. Clutch controls improperly adjusted.
2. Insufficient clutch spring tension.
3. Friction discs or steel discs are worn or warped
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Third Gear Clutch Slipping Wtf
Clutch Service Don Slip Cyclepedia
1998 2001 Honda VFR800FI Service Manual VFR800 Moto Data Project
http://www.partsfish.com/page/oem-parts-for-honda
Honda VFR800 Owner Manual

Posted on Dec 24, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Honda, VFR 800. Clutch began to slip when in gear, sometimes worse than others. One time clutch would not engage at all, had to tow. At home with engine cool, clutch worked fine. Clutch springs?


possibly
it indicates that the clutch is slipping from not being fully engaged, overheating and fading
check for the correct clearance at the cable end as the cable may be breaking internally and not allowing full engagement

Dec 23, 2016 | Honda Motorcycles

1 Answer

I just put a new slave cylinder and clutch master cylinder on a 2003 Honda accord 3.0 V6 six speed and you can shift the gears without the clutch pedal pushed in or the car started


that is normal if the gear synchro dogs ( teeth) are in line in the box
problems concerning a clutch are
slashing gears when trying to engage first or reverse with the pedal to the floor ---needs bleeding
slipping when the clutch pedal is released--- slipping clutch from the pressure not being released ---problem in master cylinder
reverse gear is the only gear not synchronised so even with the clutch depressed it is possible sometimes that it will not go into gear unless you let the clutch up to move the gears in the box then attempt to re-engage reverse

May 04, 2016 | Honda Cars & Trucks

1 Answer

1988 Honda VT 800 3rd gear slips


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch slipping
clutch slip only in 4th gear
http://freepdf.co/hojiakco-1a/1988~honda~vt~800~service~manual.pdf
http://www.partsfish.com/page/oem-parts-for-honda
http://mybikemanuals.com/honda/honda-vt-owners-manuals

Apr 09, 2014 | 1988 Honda VT 800

1 Answer

2005 Honda VFR 800 FI Interceptor dies when put in gear


Hi, Anonymous and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Engine cuts out when put in gear
Bike Cutting Off When Put in Gear
1998 2001 Honda VFR800FI Service Manual VFR800 Moto Data Project
https://www.partsfish.com/page/oem-parts-for-honda
Honda VFR800 Owner Manual

Dec 21, 2012 | 2005 Honda VFR 800 FI Interceptor

1 Answer

1999 HONDA VFR 800 CLUTCH SPRING BOLT TORQUE SPEC @


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch And Grab
How tight are clutch spring bolts supposed to be
1998 2001 Honda VFR800FI Service Manual VFR800 Moto Data Project
https://www.partsfish.com/page/oem-parts-for-honda
Honda 1999 VFR800FI Owner Manual

Jul 16, 2012 | 1999 Honda VFR 800

1 Answer

All gears from 1 to 5 are slipping. each gear


does the clutch lever release "sharply" and snap back after engagement? then lean bike over drain about a quart of oil, take off access cover to clutch and check to see if you have any broken clutch springs. if thats looks o.k. you"ll probably need new clutch plates. a real quick check when you ride the bike smell the oil, does it smell burnt? if it does, the plates are probably no good.

Apr 02, 2010 | 1996 Suzuki VS 800 Intruder

2 Answers

With the bike in gear and the clutch engage, the


Clutch discs are stuck, put the bike in gear, not running, pull in the clutch and push the bike back and forth to break the clutches loose. Once they break loose start the engine put the bike in gear, hold the front brake, and slip the clutch a little to remove any built up or stuck crud on the plates.

Mar 10, 2010 | 2000 kawasaki VN 800 Vulcan Classic

Not finding what you are looking for?
2000 Honda VFR 800 Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4903 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...