Question about 2005 Triumph Daytona 955i

1 Answer

Need help putting a toggle switch on a Daytona triumph 650 2005 model, just want to go from the battery to the lights

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Triumph Master
  • 47,290 Answers

Hi, Shannon you need to put the switch between the main circuit breaker/fuse and the light circuit fuse/breaker to do this you need a wiring diagram that you can find in the back of your service/owners manual if you can not find the first and best tool you ever bought for your bike, despair not, I have found one for you that costs eight dollars. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2005 Triumph Daytona 650 wiring diagram Google Search
http://www.triumphrat.net/triumph-supersports/138585-wiring-diagrams.html
Triumph DAYTONA 650 Manual
http://www.bikebandit.com/oem-parts/2004-triumph-daytona-600-650/o/m17609?gclid=CjwKEAiAp97CBRDr2Oyl-faxqRMSJABx4kh9X5upvesaZwgKFeykKGfLa0ebWZVEQpwihXKQ6Dn6_hoCR7Xw_wcB
https://www.tradebit.com/filedetail.php/230998906-triumph-250-500-650-750-twins-factory

Posted on Dec 19, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 3567 Answers

SOURCE: Owners Manual for a 1995 Triumph Daytona 1200?

Google " service manuals triumph "
or go to www.repairmanuals.com
or try your local library. Often guys will donate manuals to the library.

You might find a free pdf service manual on this site, they have a ton of them.
http://www.carlsalter.com/motorcycle-manuals.asp

Please rate this solution. Thanks!

Posted on Apr 06, 2009

goofduck
  • 490 Answers

SOURCE: 2006 triumph daytona 675

check the voltage to the starter then check the switch and make sure it sends power to the starter

Posted on Apr 21, 2009

Triplefuel
  • 4 Answers

SOURCE: engine management light

Engine management light was on permernantly after replacing battery, took advice and let bike idle until thermo fan started, turned bike off and let thermo fan stop, restarted bike and engine management light went off. this proceedure resets engine management system. GREAT ADVICE thanks.

Posted on May 03, 2009

jakeslimco
  • 56 Answers

SOURCE: I HAVE SOME TROUBLE WITH MY TRIUMPH DAYTONA 600

obviously you have some wire crossed straight to the positive side coming off the battery.. (probably before the ignition) trace the wire back from the speedo to make sure.. i recommend getting a wiring diagram to speed the process and make life simple...

you messed with any of the electrical?

Posted on Aug 24, 2009

  • 478 Answers

SOURCE: 1998 Triumph Daytona T595,Batt died now Check Engine is on.

ok, first off is that when you "jump a bike" dont jump by car with engine running this can fry major componets second you can try the reboot but I do think you damaged one of the parts

Posted on Dec 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 Triumph Daytona 955i wiring diagram


Hi, Jackie for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Triumph, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2006 Triumph Daytona 955i wiring diagram Google Search
2006 wiring diagram
Triumph Daytona 955i 2002 Service Manual
https://www.triumphestore.com/
Triumph Daytona 955i Handbook

Sep 15, 2017 | 2006 Triumph Daytona 955i

1 Answer

My triumph Daytona does not give spark at the plugs


Hi, Pierre and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting, leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty CKP, CMP, or BAS sensor.
8. Faulty ignition switch.
9. Tilt sensor needs a reset.
10. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
no spark
http://www.triumph675.net/forum/archive/index.php/t-166850.html
Triumph DAYTONA 675 Service Manual
Triumph Manassas Shop and save on Genuine Triumph Motorcycle Parts...
Triumph Daytona 675 Handbook

Feb 14, 2017 | 2002 Triumph Daytona 955i

2 Answers

Headlight not working on a 2002 triumph 955i any suggestions


Hi, Rhonda if your headlight is not working, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn, chaffed, or broken wires in the light circuit.
3. Corroded, broken, or loose pins/sockets in wire connectors.
4. Faulty hi/lo beam switch.
5. Faulty ignition switch.
6. Fuse is good but no continuity on both sides.
7. Faulty wiring between battery positive and headlight bulb socket.
8. Weak charging alternator/generator.
9. Faulty voltage regulator/rectifier, overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
Daytona to Speed Triple conversion headlight issues
955i headlights are crapolla Sports Model Range Forums Messageboard...
Replacing your motorcycles Halogen headlight bulb
2002 Triumph Daytona 955i Speed Triple Motorcycle Service Repair Manual...
Triumph Daytona 955i Handbook

Apr 09, 2016 | Triumph Motorcycles

1 Answer

My 2004 Triumph Daytona wont start, the gauge lights come on but the speedometer itself does not and it will not crank over any input


Hi, Chris and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Security alarm needs a reset.
6. Starter control circuit, relay, or solenoid faulty.
7. Faulty starter button.
8. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
DOWNLOAD 2004 Triumph Daytona

Aug 24, 2015 | Triumph Motorcycles

1 Answer

2004 Triumph Daytona 600 will not start


Hi, Samuel and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the enrichner.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch, kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
04 Daytona 600 Won start please help
04 Triumph Daytona 600 won start
Triumph 2003 Daytona 600 Service Manual
http://www.bikebandit.com/oem-parts/2004-triumph-daytona-600-650/o/m17609
Triumph Daytona 600 Owner Handbook Manual

Apr 08, 2015 | 2004 Triumph Daytona 600

1 Answer

2005 Triumph Daytona 650 blowing ignition fuse


Hi, Mani before diagnosing your blown fuse issue, check the bottom of your seat, if its metal and comes in close proximity to the positive battery post you need to take the necessary steps to ensure there is no contact (electrical tape, thick rubber insulation, hammer a dent in the seat bottom etc.) You are going to need a wiring diagram from your service manual, a test light, an ohmmeter and plenty of extra fuses.
If you turn on your ignition switch and immediately blow a fuse you have a hard/dead short and is usually easy to find. With a test light connected to the hot side of the blown fuse holder start stabbing the wire/s that leads away from the fuse holder and towards the ignition switch, you test light will illuminate validating the short. When the test light fails to illuminate you have passed the short and need to back up until the test light illuminates, then look in the immediate area for the short.
If you driving down the road for 30 minutes or 15 miles and blow a fuse you have soft/flying short and may take some time and patience to find.
If the main fuse/circuit breaker constantly blows/trips while riding you probably have a faulty battery terminal connection. Check battery terminals for damage or corrosion, check battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary. Any other fuses that constantly keep blowing while riding are usually caused by a loose or corroded ground wire in the circuit, which means you have to check, inspect, test each and everyone with an ohm meter set on a low ohm scale 100 ohms or less . Simply touch one lead to the ground source and the other lead to the battery negative terminal, a reading of zero indicates a clean solid ground. Any number reading or infinity indicates a poor ground and needs to be repaired. Poor or weak grounds require excessive additional amperage to complete the circuit which in turn blows the small amperage fuse.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Fuse 7 Blows When Ignition is Turned On
ignition fuse keeps blowing popping 06 triumph 675 BAR Bay Area Riders...
Triumph Daytona 1997 2005 Repair Manuals
https://www.bikebandit.com/oem-parts/2005-triumph-daytona-600-650-sump/o/m17663sch569813
Triumph DAYTONA 650 Manual

Nov 25, 2017 | 2005 Triumph Daytona 650

1 Answer

Triumph Daytona 675 unrestricted now sputtering


Hi, Anonymous what you have done is upset the delicate parameters that have been programmed into the ECM you have 3 options:
1. Put back the restrictor.
2. Have the dealer download a compatible program.
3. Purchase a Fuel Tuner.
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Bazzaz Fi Fuel Controller Triumph Daytona 675 Street Triple
Dynojet Power Commander Triumph Daytona 675
http://www.triumph675.net/forum/archive/index.php/t-147826.html
Triumph DAYTONA 675 Service Manual
http://www.triumphestore.com/
Triumph Daytona 675 Owner Handbook Manual

Jun 20, 2017 | Triumph Daytona 675 Motorcycles

1 Answer

Triumph Daytona 600 will not turn over


Hi, Jordan_x_tur before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter have failed or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Bike won start Not battery think
04 Daytona 600 Won start please help
Triumph 2003 Daytona 600 Service Manual
Hermys Tire Cycle Inc 2004 Triumph Genuine Tools and manuals Motorcycle...
Triumph Daytona 600 Owner Handbook Manual

Jul 04, 2017 | Triumph Daytona 600 Motorcycles

1 Answer

2004 Triumph daytona 955i. 4000 miles. Was riding and all of a sudden bike dies, no power to lights speedo or any gauges, starter button wouldnt work. Pushed home and turned key on all lights worked and...


Hi, The_redneckc and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or better and be able to pass a proper "LOAD" test if necessary your battery may show 12.5 volts or more but have little or zero amps and must be replaced.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Fuel tank empty.
10. Fuel tank contaminated with ethanol sludge.
11. Water or dirt in the fuel system, or clogged filter.
12. Restricted, blocked or kinked fuel line.
13. Faulty fuel pump.
14. Faulty pressure regulator.
15. Faulty or clogged fuel injectors.
For more information about your issue and valuable "FREE" downloads that you need please click on the blue links below. Good luck and have a wonderful day.
2002 955i Daytona Quits while running and then will not start
Topic Starting Issue on 2005 Triumph Daytona 955I RUNNING AGAIN Read 8197...
Triumph Daytona 955i 2002 Service Manual
Hermys Triumph Motorcycle Parts 2004 Triumph Genuine Body and frame...
Triumph Daytona 955i Handbook

Apr 17, 2017 | 2004 Triumph Daytona 955i

Not finding what you are looking for?
2005 Triumph Daytona 955i Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4753 Answers

yadayada
yadayada

Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...