Question about 2002 Honda CR 125 R

1 Answer

Needs a new crank and crankcase lefthand side

I have a 2002 honda cr125r with a cracked casing near the drive sprocket and i am wondering who would have a used engine for sale out there that is a 2002 honda cr125r. email me

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

You have a couple of options. Have a professional welding shop weld the aluminum case and then all that is left to do is to replace the seal on the output shaft. This will probably cost about $50.00.

Second option would be to Google " motorcycle salvage honda " and find what you need there. If you replace the broken left casing, also replace the right center casing. Slight changes in manufacture during a production run sometimes occur. This means the casing halves may not line up perfectly causing the shafts not to turn when the engine id put back together. ALWAYS replace center casings as a matched set.

Posted on Jul 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gl1100 crankcase breather tube leaks oil


Hi, Anonymous and the usual suspects are:
1. Oil tank/system overfilled.
2. Faulty breather valve.
3. Engine breather hose bent, pinched, kinked etc.
4. Air filter has too much "pre-oil".
5. Crankshaft seal failure allowing transmission fluid to migrate.
6. Blow by drain tube cracked/split or filled to capacity.
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
GL1100 crank case venting
83 GL1100I oil coming out of Crankcase vent GL1100 Information Questions...
Honda GoldWing GL1100 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda Gold Wing GL1100 Owner Manual

Jun 18, 2014 | 1983 Honda GL 1100 Innerstate Gold Wing

1 Answer

2002 Honda CR 125 R spark plug gap


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
spark gap
Honda CR125R 2006 Owner Manual Spark Plug
Honda CR 125R 2002 Sevice Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda Elsinore CR125M Owner Manual

Jan 29, 2014 | 2002 Honda CR 125 R

1 Answer

2002 Honda VT 750 CD Shadow remove the front sprocket cover


Hi, David for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
Removing front sprocket cover
Honda Shadow Spirit 750 Sprocket Mod How to Replace Chain and Sprockets
Honda 1998 VT750C Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda VT750C Owner Manual

Jun 30, 2012 | 2002 Honda VT 750 CD Shadow A.C.E. Deluxe

1 Answer

It's a cr 125 not a cr125r.......I need to find out why it's locked in gear an how do I get it out of gear? If I replace the left crank case do I also have to replace the right one as well?


Normally a locked up tranny is due to a badly bent shift fork. Did the bike crash on the shifter side? My guess is that it did and the left center case cracked or broke open at the same time. All center cases are matched sets. In theory you should be able to just replace the left with no problem. In practice, the two halves never seem to align properly. Yes, they may bolt together, but the mis-alignment causes the shafts to bind up; the shafts won't turn. That is why a matched set is needed. Please rate my answer. Thanks.

Apr 09, 2011 | Honda CR 125 R Motorcycles

1 Answer

2003 Honda NSR 125 transmission rebuild


Hi, Stowy_1 the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Honda 2 Stroke Bottom End Rebuild Part 1
Motorcycle Bottom End Rebuild Part 2 of 3 Crank Bearings
Honda CR125R 2006 Owner Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CR 125R 2002 Sevice Manual

May 27, 2017 | 2001 Honda NSR 125 R

1 Answer

2002 Honda CR 125 R cylinder torque specs


Hi, Boozen4less for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
02 cr125 top end torque specs
Cylinder bolt torque specs for CR 125
Honda CR 125R 2002 Sevice Manual
http://www.partsfish.com/page/oem-parts-for-honda
http://owners.honda.com/assets/OWNERLINK/model/own_man/powersports/2007/2007_CR125r.pdf

Mar 28, 2010 | 2002 Honda CR 125 R

3 Answers

Can a hole in the crankcase be repaired. Honda


Yes, (Aluminum) but it depends on where as welding aluminum needs to be done by a very good welder. It needs to be in a place that you can get at it to clean up and weld. Dissasembly is also a big part of it. Have a welder look at it if you can.

Sep 03, 2009 | 2002 Honda CR 250 R

1 Answer

Cr125r 2001 cant start after changing piston and cylinder


hi mate you need to adjust the float if theres to much fuel going through you need to take the float out and adjust it to the manual specifications but remember slot the pin out and take the float out but watch the little valve which stops the fuel where the little valve is hanging from that is the part you need to adjust

Jul 20, 2009 | 2002 Honda CR 125 R

1 Answer

Fuel leaking out of the crankcase


Sounds like the float is stuck in the carb.. its not really pouring out of the bottom of the cranks case.. its an overflow hose that is routed down through the motor so it will drain out under the bike.

You probably need to pull the carb and clean it, and check the float.

Jul 18, 2009 | 2005 Honda CBR 600 RR

Not finding what you are looking for?
2002 Honda CR 125 R Logo

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...