At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there are 2 bolts under the front area of the forward seat each side remove the 2 bolts lift the seat and forward to remove,then you will see 2 more bolts for the rear seat remove them slide the seat forward and remove it.
thr rear wheel is removed as normal except u will have to tilt the bike over on the opposite side to the driveshaft. dont forget the brake rod has to be removed as well.
it (assuming it is a VS800) is in a trap door under the bike between the frame.
disconnect the negative lug (left side) then the positive (right side) (this will be a small slotted screw viewable through a postage stamp sized window on the side of the battery cover)
from underneath you remove the two front trap-door bolts and the cover will swing downward (be ready to support it as it swings)
to add clearance have the back wheel up on a small thin board and one of equal size under the side stand
for more info on suzuki intruders and boulevard series bikes check with www.intruderalert.com
×