Question about 2004 Derbi Senda R 125 4T

1 Answer

I have a puncture in my rear tyre and for sum reason a cant get the spindle out to repair the puncture, is there a certain way the spindle needs to come out?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 867 Answers

Standard on most motorcyles,remove large nut from shaft. make sure chain adjusters are loose. tap shaft with hammer and drift to knock it out of the hub and springarm

Posted on Jul 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I find the full service manual for Bmw x1 2011? Brake pad, disc replacement, suspension, steering system alignment and balancing etc... Also how to repair the punctured run flat tyre on Bmw x1???


Take the flat tyre to a tyre shop and have it repaired there as believe or not , puncture repair requires the correct tools and procedure for safety. As for the rest a good workshop manual should have that information or get a service hand book from the dealer service centre.

May 23, 2014 | Cars & Trucks

1 Answer

Adjust tyre beading


You may have broken the bead when you rode it while the tire was flat. More than likely you will need a new tire

Jun 10, 2013 | 2011 Hero Honda Passion Pro

1 Answer

I have a bebecar ip op and i want to know how to detach the rear wheel as it has a puncture?


The rear wheel is held in place by a locking clip which is controlled by a lever. To remove the wheel, simply press the lever rearwards, and pull the wheel away from the housing. Remove the tyre carefully, using appropriate tyre levers, in order to repair the puncture in the inner-tube, or to replace it.

Mar 27, 2011 | Bebecar M City Stroller

1 Answer

A spoke on the rear wheel has snapped off how can I repair it?


Simply buy a replacement spoke. Unscrew the dustcap on the tyre valve and deflate the tyres inner tube. Remove tyre using tyre levers(as you do to repair a puncture). Next remove the inner tube to reveal the spoke tensioners. undo the tension nut and allow the broken spoke to fall out, feed the other part of the broken spoke out of the hub. feed the replacement spoke through the hub and into the hole on the wheel rim. Now screw on the tensioning nut to the spoke.Tighten up to the same tension as the other spokes. replace inner tube and tyre, then reinflate. Viola!

Jan 30, 2011 | Cycling

2 Answers

Back wheels keep deflating


hi, the chances are you have a puncture os something sharp sticking into the inner tube inside the tyre, what you need to do is buy a puncture repair kit then using the repair kit you take the tyre off the wheel then take the inner tube out.
now blow the inner tube up and place it in bowl of water and you should see bubbles coming off the inner tube, mark this with pen when dry so you know where the whole is, now use the puncture kit and place a patch over the whole, you can buy glue type patches or stick on patches without glue, you peel the back off the patch and put glue on or stick it over the whole if its a stick on patch and not glue.

then whilst this dry run your fingers around the inside of the tyre and check for any thorns or something sharp sticking in the tyre if you feel anything remove it and you should be ok, then when glue dry put the inner tube back in tyre and fit the tyre back on wheel now when you pump it up it shouldnt go back down unless you get another puncture.

if you are unsure what you are doing then taking your stroller into any bike shop and ask them to repair the punctures for you and they will do this for you whilst you wait.



Jul 10, 2010 | Quinny Buzz Three Wheel Stroller

1 Answer

My quinny rear tyre is flat tried to inflate the tyre but still does not work what should i look out for


you have a few choices
but if you want a long term fix you are better off getting a new inner tube as once a puncture occurs with the quinny wheels they will carry on doing it but theey are cheap enough to replace via ebay for about £6

if you dont want to replace you will need to remove the rubber wheel from the hub as you would a bike tyre then remove the inner tube
pump the tyre up put in water so you can find the hole then fix with a puncture repair kit

if you want to carry on using you can fill the tyres with tyre weld as you would a car they dont puncture and makes the quinny a smother ride

and if all else fails you can buy a used or new pair of wheels from ebay between £15 and £30
hope this helps x

Dec 14, 2009 | Quinny Buzz Three Wheel Stroller

1 Answer

Tyres and pressures


The Cali' Special tyre pressures:- --------------- 1 RIDER.---------------------- 2 RIDERS Front ...... 2.3 Bar(33.5psi) ................... 2.3Bar(33.5psi) Rear ....... 2.5Bar(36.3psi) .................... 2.9Bar(42psi) I use BT45's on mine but I have the ordinary tubed rims. I find the ride harsh but this may be down to suspension rather than tyres. People recommend running the BT45 at a slightly higher pressure than the book. I got 8500 miles from the front and 4700 from the rear. Although the rear was changed slightly early due to a puncture. I will probably try a different make next time.

Nov 10, 2008 | 2002 Moto Guzzi California 1100 EV Touring

1 Answer

Tyres and pressures


The Cali' Special tyre pressures:- --------------- 1 RIDER.---------------------- 2 RIDERS Front ...... 2.3 Bar(33.5psi) ................... 2.3Bar(33.5psi) Rear ....... 2.5Bar(36.3psi) .................... 2.9Bar(42psi) I use BT45's on mine but I have the ordinary tubed rims. I find the ride harsh but this may be down to suspension rather than tyres. People recommend running the BT45 at a slightly higher pressure than the book. I got 8500 miles from the front and 4700 from the rear. Although the rear was changed slightly early due to a puncture. I will probably try a different make next time.

Nov 10, 2008 | 2002 Moto Guzzi California 1100 EV Special...

1 Answer

Flat left rear tyre - Jane power twin


think you have a puncture! tyre slime works wonders, i got a puncture on way home from school and used this repair system. worked a treat and treated all other tyres as a preventative measure. jope this helps

Nov 03, 2008 | Jane Powertwin Azulon Stroller

Not finding what you are looking for?
2004 Derbi Senda R 125 4T Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Derbi Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

ARNE ERIKSSON

Level 2 Expert

204 Answers

Are you a Derbi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...