Question about Suzuki T 350 Motorcycles

1 Answer

Hi,my girlfreind was riding our lt80 on a forest track probably at full throttle as the track is rather open for speed.one second she is going flat and the next thing it just comes to a holt.we havent been able to start it since.help please

Posted by on

  • rigger094 Jul 19, 2009

    thanks.i have good fuel flow to the carb.so i will
    move to the spark plug,hopefully thats it.thanks again for you help

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,129 Answers

First make sure the fuel shut off valve is clean by draining the tank and dissasembling the petcock fuel valve assembly there is usually a bowl on them designed to trap debree, reassemble, change fuel filter, and then discconect the fuel line from the carb run it to a small container and turn on the gas valve to ensure a steady flow of fuel, always check the easy and obvious first. If the proper fuel flow is present move on to the ignition pull ou the spark plug plug it in to the spark plug wire groung it iut to a metal surface and kick the bike over if a blue or purple spark is present the ignition is ok (caution do not hold the ignition wire while testing) if you have spark and fuel then you must check the compression any thing lower than 80 psi is weak and the motor will need a piston and ring job. I hope this helps and you are back on the track soon good luck

Posted on Jul 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

X mark zero turn mower 2007 won't run full speed


I as u me you mean the engine won't run at full speed. Check fuel filter first. Then make sure the throttle cable is actually opening the carburetor all the way. I would then suspect that the carb its self is in need or adjustment or repair

Jul 15, 2016 | Garden

1 Answer

Why does throttle go full speed when stsrted an stays full throttle


Hi Paul:
I'd check the throttle linkage at the carb.
It may be that it is not connected or a return/governor spring has come loose.
With the engine off, check the functions at the carb when the throttle lever is moved back and forth between the slow and fast positions.
Odds are pretty good that you will find a location in the mechanism where the linkage movement does not perform the intended function.
Cheerfuls.

Apr 30, 2016 | Garden

1 Answer

Basically I'm losing a lot of corner speed, when turning into corners. I shut the throttle off too early and it feels like I'm carrying the bike round the corner. If adjust the throttle mid bend,...


You need to accelerate very gently while you go round the corner. This sounds wrong but even if you hold the throttle in the same position, physics dictates that as you go round the corner you do actually accelerate as you go round a corner at a constant speed (velocity/direction/speed - look it up if your interested!).
So on the approach to any corner, you need to: -
1 Position yourself and the bike for the approaching bend, toward the right hand side of your lane for left hand bends and vice versa.
2 Adjust your speed to one you can quite happily ride around your bend (Slow down by easing off the throttle or appling the brakes)
3 Once at the right speed, (off the brakes) select the right gear for the speed your doing.
4 GENTLY apply some throttle to stop the bike slowing down anymore.
5 Tip the bike into the corner by gently pushing on the left bar for left handers or vice versa keeping the throttle still so that you hold your speed through the corner.
6 As the bend opens up (becomes a straight) gently apply more throttle as you release the pressure on the bar and stop turning.
If you want to keep improving your riding skills, sign up to a advanced riding course. They are for people who enjoy riding and want to be safer and consequently faster.
Good luck with your riding and enjoy!

Jul 28, 2011 | Suzuki GSX 1300 R Hayabusa Motorcycles

1 Answer

I have a gogo scooter it bleeps once than cuts out I have to turn it off and back on for it to move


probably a dead battery or a bad battery will move you till the controller gets to a threshold voltage then it beeps and stops , testing this is easy turn on the scooter adjust the speed control to the lowest setting then start riding the scooter at full throttle then start turning up the speed controller if that produces the problem then the batteries need charged or replaced

Jul 01, 2010 | Pride Mobility Products Go-Go Elite...

1 Answer

When engaging mower blades speed drops or stops


Check throttle cable at carb and make sure you have full travel. Sounds like rpm is little to low. Throttle cables are usually held in place with 1 screw and a washer. Put cable at full throttle loosen screwand pull back until throttle at carb in at full then tighten screw.

Mar 07, 2010 | Garden

1 Answer

Troy built lawn mower (riding) won't go full


I did not know riding mower had a gas pedal. I know if you leave the throttle control up all the way the engine will choke out. The pedal you are pushing, I think, is the forward/reverse hydrostatic transmission. You may need a new drive belt. The one you have now may be stretched out.
Good Day.

Oct 07, 2009 | Troy Garden

1 Answer

As soon as my 10 hp Briggs & stratton engine starts, it goes to full throttle. I have no control


The engine speed is controlled by a governor and throttle position. There is a spring that holds the throttle (butterfly valve) against the slower position. When the motor is under load' the governor exerts force to open the throttle position. Make sure that all of the components are clean and not binding. Look for a broken or disconnected spring. It is also possible that the governor is stuck in the demand full throttle position.

Sep 11, 2009 | Briggs & Stratton Garden

1 Answer

I have a honda CB400 super four and have been having a slight pro


Your carb may be adjusted a little lean. Try adjusting the needle, keeping track of the changes you make, and blipping the throttle full to check the result.

Jul 28, 2009 | 2001 Honda Cb 400 Super Four

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...