Question about 2002 CCM RC 30

2 Answers

No spark at the plugs Suzuki engine R30

Had not started bike for a month, work abroad tried to start bike turned over but did not fire. Checked fuses, wiring, ignition switch etc . Took bike to the nearest CCM agent. Phoned him after a week and he said it was the coil. He replaced the coil and bike would still not start and he could do no more and he suspected the CDI unit. Got the bike back and CCM supplied me with a CDi unit to try, still would not start. They suggested the Rev Counter could be the fault, got one from them still would not start. Took the bike to a independant dealer, two weeks later it is back in my garage still not starting All the lights etc work . The Side stand switch has been bypassed in case that was the fault. Prior to this saga the bike used to start real good

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have ROTAX engined 604 no spark at my spark plug, just found another site that says the same thing no spark changed every ignition/electrical part and nothing. then spotted small crack in flywheel magnet. i'm going to check mine weekend. worth a try. it says he was bumpin and it worked high revs. mine died when i put it in neutral after a serious thrash on an A road 1-5th gear wheelie :| fort id fried a piston ring but no spark is what i'll fix before i pull the bore apart. good luckk

Posted on Aug 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 35 Answers

Check the fuel filter for sediments clean the carb filters too if your bike has one, overhaul the carb if necessary....

Posted on Jul 19, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2004 suzuki volusia VL800 cranks but won't start. I checked the fuel pump and it pumps fuel.I checked for sparks and it sparks. what could be the problem?

I always go back to the basics. Fuels, spark, compression. Try a shot of starting fluid spray into the carb immediately hitting the starter, if it starts and dies the problem is fuel. If it doesn't even spit or try, it's ignition. Gasoline nowadays is poor, shelf life maybe 3 months. Use absolutely fresh non oxygenated (10% ethanol) premium. Spark plugs can fire out of the engine easier than when under compression. I use a dandy home made tester, a spark plug attached to a battery clamp which easily grounds to the engine. Use a healthy .050 gap to see the spark is strong enough to jump the distance. After you try to start it, pull your plug. Is it bone dry or wet? That'll give a clue. If all else fails it's time for a compression test, and determine if your spark is happening at the right moment. Re try your efforts first as described, get back to me with your results, and best of luck.

Feb 11, 2015 | 2004 Suzuki VL 800 Volusia

1 Answer

Bike turning over no spark from spark plug

if you have checked ll the points where you should get fire fuse wire conections check ignition switch I had a problem like that checked every thing 3 and 4 times tracein the points from key to batterie and back couldn't find a problem then I took key plug checked there bam that was the problem

Apr 17, 2014 | Harley Davidson FLSTF Fat boy Motorcycles

1 Answer

2000 vulcan 1500 ignition light not working

Take the cables loose from the battery. Clean the cables. Might need a wire brush. Reconnect.

Jan 30, 2014 | Motorcycles

1 Answer

97 Suzuki intruder 800

Drain the carb floats and clean with Seafoam. Gas breaks down after about 6 months and the ethanol in the gas coats the carb.

Oct 12, 2013 | Suzuki Motorcycles

2 Answers

96 bandit, wont start,will turn over but not fire up, have changed plugs, drained carbies, checked for spark, still not firing up, any ideas?

check fuel filter and shut off in float chamber , if you have spark and gas , still not firing check timing .

Mar 18, 2012 | 1996 Suzuki GSF 600 S Bandit

1 Answer

1995 gsxr 750 no ignition power

If the wires were hot check fuses, kill switch and saftey curcuits (clutch ,side stand neutrail switches.)

Feb 22, 2012 | Suzuki Motorcycles

1 Answer

The ignition quit working took the ignition wires touched together to make the bike start; the starter button then quit working so I was jumping the bike off the solnoid, worked for months. parked over a...

Check the starter,wire connection harness and starter solenoid.
That high amp means a power that was being drain by the solenoid or the starter motor.
Disconnect the wire terminal of the starter and connect your ignition, you will see that it will not drain power from your battery and solve your fuse popping.
Then pull down the starter, overhaul it and clean/lubricate the bushing. If you can't do the starter a mechanic can do it for you.

Hope that helps you.

Thanks for using FixYa!

Jul 15, 2011 | kawasaki KLR 250 Motorcycles

1 Answer

The bike has power to ignition, lights, horn etc. but can not get bike to turn over. Fuses look good, bike fired a month ago but hasn't been started since. Tried today and nothing. Does battery need to be...

some bikes have a clutch switch where you have to pull the clutch in to start it, i know a lot of suzuki's have them.
also make sure it is in neutral.
and make sure the 'kill switch; on the right hand bar is set to 'run'

Mar 16, 2011 | 2004 Suzuki GSX 600 F (Katana)

2 Answers

Ive just put a anew battery and plugs on my bike,but it still wont start,i have checked and there is a spark on the plug and the bike is turning over but it isnt firing

Remove lh cover from air filter ( chrome cover) and spraysome easy start into the housing while turning the engine over, you could also soak a cloth in fuel, and hold it in the ail filter housing with filter removed, this way when you attemt to start it the fuel on the cloth will enter the engine and hopfully your bike will start, quickly remove the cloth or the engine will flood, if the bike starts hold the throttle at a steady 3000rpm for a miniute or two, until the bike will idle if your bike runs then stops after this, you may try draining the fuel from the carb by undoing the screw at the lowest point of the carb, let it drain completely, in severe cases you may have to remove and cleanout carb

Feb 25, 2011 | 2000 Suzuki VL 125 Intruder LC

1 Answer

08 flhx turns over but won't start its firing, and fuel pump is working, it all started with a blown accessory fuse. while searching for the problem. i create another. it went into limp mode after blowing...

re-check the wires, get the manual and redo what you did. bike not starting may be a seperate issue, does it crank? you have to be very specific if you hope to get a relevant answer from someone who cant see your bike.

Jun 13, 2010 | 2008 Harley Davidson FLHX Street Glide

Not finding what you are looking for?
2002 CCM RC 30 Logo

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top CCM Experts


Level 3 Expert

75817 Answers

Jay Plesset

Level 3 Expert

2825 Answers

Tom Chichester

Level 3 Expert

34170 Answers

Are you a CCM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides