Question about 2001 Triumph TT 600

2 Answers

2001 TRIUMPH TT600 SIGNALS DON'T WORK..WHY????

I HOOKED UP SOME FRONT TURN SIGNALS AND THEY WORKED FOR A FEW THEN THE NEXT DAY I WENT TO USE THEM AND THEY NOT WORKING THEM OR THE REAR ONE. I DISCONNECTED THE SIGNALS AND CHECKED THE FUSE AND REPLACED THE RELAY AND STILL NOTHING. I'M AT A LOSS HERE AND NEED SOME HELP. HOW DO I FIX THIS

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

If these are LED lights, they tend to use more of a load on the relay. Try to get a new relay with the same prongs and ratings, but for a truck. These tend to accept more power because trucks sometimes use trailers, which would have to power more lights than usual. Give it a try. About a $10 fix.
ride smart.
Tim

Posted on May 04, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 188 Answers

Try hooking up one light at a time

Posted on Jul 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 triumph TT 600 that is idling rough and is backfiring any idea on what it could be?


Hi, Joe and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a "LOAD" test if necessary.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Faulty main circuit breaker and or connections.
4. Faulty ignition coil and or connections.
5. Faulty spark plug, oil or gas fouled, wrong heat range or service type, wrong gap, loose in the cylinder head, broken electrode or insulator.
6. Faulty spark plug cables, leaking or broken, internal damage check for spark leakage in the dark.
7. Faulty ignition module, switch, CKP, MAP, CMP, sensor and or any connector in the ignition circuit could have corroded, loose, or broken pins/sockets
8. Burnt exhaust valve or air leak in the exhaust system.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.triumphrat.net/maintenance-and-workshop-talk/101962-tt600-year-2000-cut-out.html
http://zkmc.org/pdf/1014488-Triumph-TT-600-03.pdf
Hermys Triumph Motorcycle Parts Triumph TT600 Genuine Motorcycle Parts in...
http://mybikemanuals.com/triumph
Triumph TT 600 2001

Mar 18, 2017 | 2001 Triumph TT 600

1 Answer

How much engine oil does my triumph tt600 take


Engine Oil Capacity (dry fill): 1.05 US Gal (4.00 liters)
Engine Oil Capacity (oil/filter change): 1.00 US Gal (3.80 liters)
Engine Oil Capacity (oil change only): 0.95 US Gal (3.60 liters) __________________
Triumph oil is pretty pricy, might want to use Mobile one, it works great!

Mar 02, 2011 | 2000 Triumph TT 600

1 Answer

Will engine from triumph tt600 2001 fit 2002 model?


Yes, There are no major changing on 2002 engine. It should be working well.
Regards, jay

Mar 01, 2011 | 2002 Triumph TT 600

1 Answer

2001 triumph tt600 fronnt wheel removal


support the bike so that the front wheel is off the ground.
1, remove front mudgaurd, 2, remove brake caliper, 3 disconnect any speedo drive cable or wires, 4, loosen axel nut, and withdraw the axel, 5, remove the front wheel.

May 23, 2010 | 2001 Triumph TT 600

1 Answer

After fitting a new relay for the ECU/ fuel pump on my Triumph TT600....the fuel injection will not work.....bike will start, when, drip feeding fuel into manifold....so no other problems, and no faults...


this 2000 triumph tt600 wont start it does turn over it was runing last riding season it have new battery fresh oil im thinking the fuel iinjector need cleaning im at the right path to get it runing

May 09, 2010 | 2000 Triumph TT 600

1 Answer

SIGNAL RELAY


No, power to two of the terminals, the other one is grounded.

Jul 20, 2009 | 2001 Triumph TT 600

2 Answers

Signal problem


LED ones? require less voltage, so relay gets conused. Fit indicator resistor (available anywhere, prob from where you bought the indicators)

Jul 18, 2009 | 2001 Triumph TT 600

1 Answer

All blinkers stoped working


flasher relay
or bad earth [ ground ]

Jul 18, 2009 | 2001 Triumph TT 600

13 Answers

"homeless" 2 wire connection plug on a 2002 Triumph TT600


Try this,If you can't see the details good enough,The plug you are talking about is for the exhaust air injection solenoid.

db58f0b.jpg
6e5ed72.jpg

Feb 09, 2009 | 2003 Triumph TT 600

Not finding what you are looking for?
2001 Triumph TT 600 Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...