Question about 1998 kawasaki ZX-9R Ninja

3 Answers

Kawasaki ninja zx9r clutch problem

So i have a 98 ninja zx9r, and recently my clutch cable lost all tention whatsoever.. and so i checked the cable.. the cable is fine.. but the return spring on the outside is broken, my clutch plates contstantly spin but wont disengage when i pull the clutch lever the cable is connected to. im not sure what could be wrong, i dont know much about bikes but could it be internally?

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

On your bike there are two clutch parts that can wear and cause this problem. The broken spring should be replaced but is not causing the problem. Check the bottom of the clutch release shaft #13102. The end of the shaft may be broken, bent or severely worn. The part the shaft engages with is the clutch rod #46102. It could be bent, broken or severely worn. This part is inside the clutch hub. Just remove the five springs and then the outer cover plate and the rod should be accessible.

kawasaki ninja zx9r clutch problem - 372ba24.png

Posted on Jul 24, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

1-2-4-3, 1 being on the left when looking forward.

Posted on Apr 12, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Dose anyone know the firing order to a 97 zx9

Posted on Oct 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a Kawasaki ZX900R AE-model engine fit into a 94 Kawasaki ZX900R B-model frame?


Hi, Anonymous after careful deliberation 4 out 5 Kawasaki Gods give this one a thumbs up, but just to be on the safe side you should give your local dealer's parts/service department a call to confirm. For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
ZX9r engine into ZX7r
will 98 zx9r motor work
KAWASAKI ZX900 C1 Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Feb 16, 2017 | 1996 kawasaki ZX-9R Ninja

1 Answer

My zx9r 1999 I went out today and bike will only select 1st and 2nd gear it was cold could you help


Hi, Mark and the usual suspects are:
1. Clutch not disengaging.
2. Bent shift shaft.
3. Shift fork bent or seized.
4. Gear seized on the shaft.
5. Gear positioning lever binding.
6. Shift return spring weak or broken.
7. Shift return spring pin loose
8. Shift mechanism arm spring is broken.
9. Shift mechanism arm is broken.
10. Shift drum is broken.
For more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.zxforums.com/forums/mechanical-technical/28520-01-zx9r-trans-shift-problems-like-no-other-ive-found.html
won shift up to 2nd
KAWASAKI ZX900 C1 Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Jan 05, 2017 | 2000 kawasaki ZX-9 R Ninja

1 Answer

Kawasaki zx9


This is probably a clutch problem, rather than a problem with the gearbox. Check your clutch cable adjustment and check when the clutch plates were last changed. Ninja's tend to be ridden hard through the first couple of gears. This can put strain and wear on the clutch friction plates.

Sep 15, 2013 | Motorcycles

1 Answer

What are the steps to take when removing a 1999 kawasaki ninja zx9r fuel pump from your bike and replacing it?


Drain fuel Remove lines replace if needed Remove bolts to pump with out braking Clean around where gasket goes Check for dirt particles Install new pump Hook up lines and get riding again

Oct 20, 2012 | kawasaki Ninja Zx7r Zx9r '94 To '04

1 Answer

How do I add water to the radiator in a 98 kawasaki zx7?


using a funnel, unscrew the cap andpour themixture in.

Aug 10, 2011 | kawasaki Ninja Zx7r Zx9r '94 To '04

2 Answers

Will 2001 zx9r fairings fit the 1998 zx9r????


will fairings from a kawasaki zx9r 98 fit on a zx9r 97??????

Apr 14, 2010 | 1998 kawasaki ZX-9R Ninja

1 Answer

Want to fit a new clutch for my kawasaki ninja zx9r p reg but need a full view of the clutch so can repair it myself


you dont need the micro phish to fix just take your time label things if needed. pull in apart and get your thinkness of your plates same kawa have diffrent sizes. the thicker your stack the more grab but becarefull it still needs to open

Jan 31, 2010 | 1998 kawasaki ZX-9R Ninja

1 Answer

Need to know if a 98 enign for my kaw zx9r would fit a 96 frame


It does not fit.Different rear axles and cylinder head bases.

Jun 09, 2009 | 1998 kawasaki ZX-9R Ninja

Not finding what you are looking for?
1998 kawasaki ZX-9R Ninja Logo

2,901 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...