Question about Honda CR 250 R Motorcycles

1 Answer

1994 honda cr 250 kick start

Honda cr 250 kick start slips 9 times out of 10 it dont catch and keeps winding up do i need a new one or can i fix it my self im no expert mind

Posted by on

  • Anonymous Mar 15, 2014

    the kick start slip when I try to start it

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 38 Answers

Pull the cover and see if ther is a spring messed up or th teeth are bad ,look close to see how it works, take your time it will come to you.

Posted on Jul 18, 2009

  • k_j_m41
    k_j_m41 May 03, 2012

    mine does the same thing if it is not at the top of the compression stroke it just falls away..It needs a new fick start gear not your ratchet or spring its the gear mine is about 90 bucks then you need to do all your seals as well

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my kick start will not kick


Something broke in the crank case.

Apr 25, 2014 | 2002 Honda CR 250 R

1 Answer

My second gear is winding out


clutch needs ajustment-getta a repair manual for that model-

Feb 19, 2014 | 2002 Honda CR 125 R

1 Answer

2002 Honda CR 250 R high idle


Hi, Doctah and the usual suspects are:
1. Throttle cables improperly adjusted, pinched or need lubrication.
2. Idle adjusting screw needs to be backed off.
4. Air fuel mixture adjusted too lean start with 2 full turns.
5. Intake system air leak.
6. Fast idle choke ramp is not releasing.
7. Broken throttle return spring.
8. Damaged diaphragm or slide.
9. Faulty MAP, TPS, ATS, O2, sensors or wiring/connector.
10. Multiple carburetors not in sync.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
03 CR250 fast idle
high idle dont know what causing it
CR250 2002 2003 pdf
http://www.partsfish.com/page/oem-parts-for-honda
http://owners.honda.com/assets/ownerlink/model/own_man/powersports/2007/2007_cr250r.pdf

Aug 27, 2012 | 2002 Honda CR 250 R

1 Answer

2004 Honda CR 125 R will not start


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the enrichner.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch lever, or kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2003 cr125 won start
What to Do Check When Dirt Bike Won Start
Honda CR 125R 2002 Sevice Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda Elsinore CR125M Owner Manual

Jun 28, 2012 | 2004 Honda CR 125 R

1 Answer

2002 Honda CR 250 R lost all compression


Hi, Brandy for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2001 CR250 Fresh top end no compression
2001 CR250 Fresh top end no compression
CR250 2002 2003 pdf
http://www.partsfish.com/page/oem-parts-for-honda
http://owners.honda.com/assets/ownerlink/model/own_man/powersports/2007/2007_cr250r.pdf

Mar 04, 2012 | 2002 Honda CR 250 R

2 Answers

I have a 1999 honda cr 250 and it wont start it will start for a second every about 10 kicks and then stop again... help me


You will have to perform some basic checks like tht of sparks reaching the spark plugs and tht the fuel too enters the combustion chamber, wth your explanation it seems fuel is not entering correctly into the combustion chamber... you will have to clean the carb/s.

Jun 14, 2009 | Honda CR 250 R Motorcycles

2 Answers

When I try to start my honda CR 250 the kick start leveler will not go down, it is lick it is frozen or blocked.


I had the same problem, and i was that the shaft that the kick start was attached to had sezied on to the idler gear in side the engine. all i did was drain the oil, remove the cover and replace the shaft and idler gear.

Apr 04, 2009 | 2003 Honda CR 250 R

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

656 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...