SOURCE: drivers side upper hinge is bad 2000 chevy blazer
You need to purchase or borrow a door spring compressor. They aren't too expensive. You might be able to get one from the part store. You can however get it out with a pry bar. But you will need the compressor to get it back in.
SOURCE: removal/replacement of upper control arm bushing
the a arms need to be removed, and the bushings pressed in and out , then you will need to reinstall them and the truck will need a front end alignment. You really need a qualified person to do this.
SOURCE: im changing the hinge pins
Pin punch. These are a pain but they will come out. They are grooved on the bottom so they don't spin. this is what makes them difficult to get out. just keep hammering away
SOURCE: clutch pedal pin
If its a pin, the key fell out, if it's a bolt, replace the nut with a nylock one.
260 views
Usually answered in minutes!
×