Question about 1992 kawasaki GT 750

1 Answer

Choke and exaust problem

Hi great site i may be able to get some help me beleives with me rat...two probs.

A: took the exhaust off to have it cut down and now i can not put it back on as 3 of the exhaust colletts are rusted away, is there an easy way to make some up or buy them cheapley.

B: when choke pulled out the engine races to like 2000 revs, not good with the cold engine or neibours...chears buds..

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 163 Answers

On this vintage bike you may find your exhaust parts in a bike salvage yard. As for as the choke and engine revving this is typical of this choke design. My suggestion is get quieter pipes if your worried about neighbors... If your one of mine I'll let you know about it! LOL! Seriosly though I do not recall and adjustment that would allow you to not have so many rev's I know all my old carbbed bikes did the same thing, only thing to do is slow it down aquickly as possible or don't use full choke. My new bikes are all injected so no more choke...Possibly upgrade....

Posted on Sep 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 22 hp bs crafstman riding mower and it would fire off starting fluid but would not on its own. I took carb off and cleaned out and got it running but only on choke. It's a v twin and on one side...


running rich will make it run colder.....I wouldn't run it anymore til you find theproblem, it will burn your valves. air leak in your intake/carb is more than likely your problem , check for cracks in the intake manifold , leaking gaskets

Feb 23, 2011 | Briggs & Stratton Briggs Stratton Vanguard...

1 Answer

I have a Mcculloch 16in maccat 35cc chain saw


Does the chain turn freely by hand? Is it being oiled properly? Check the fuel filter, air cleaner, and muffler for plugging. Does 'feathering' the choke make any difference? If it helps, try turning the H jet needle CCW about 1/4 turn which should make it run more rich and 4-stroke until you are cutting which should immediately cause the engine to 2-stroke. Hope some of this helps!

Jul 21, 2010 | McCulloch Garden

1 Answer

Looking for repacement globe for bath room exaust fan


Hi there, What I would do without knowing what kind of exhaust fan you have is Google it online. Or, if you have the make, model number, etc., and take it down to your nearest home depot, lowe's, etc., or heating and supply company close to you. These are pretty common exhaust fans, so you should have no problem finding a replacement. Good Luck with this, and if you have an other problem regarding your fan, feel free to contact me and I'd be willing to help you out.  - Jim

May 20, 2010 | Broan-NuTone N-8663RP Combination Light...

1 Answer

Hello I have a 1996 Suzuki DR-200 and recently put


G'day mate the 1st thing i would go for is float level then compresion if it does have the **** it wont take the fuel in , rules are if it has **** ( induction ) Squeeze (compression) Bang ( spark) and Blow (free exhaust) then it should go, if it was running to lean there is good chance it has a burnt exhaust valve which will greatly drop the compression/induction, also check the valve clearence. hope this helps

Apr 04, 2010 | 2000 Gas Gas EC 300

1 Answer

Glowing RED exhaust pipe


try a bigger jet or its going to cause some damage. You can pull the choke on to get some more fuel in to cool it .
Check that the cam timing hasnt been played with, some change the exaust cam by a tooth to copy yz specs, on top dead centre, there is a little arrow on each cam that lines up with the rocker cover surface

Mar 09, 2010 | 2003 Yamaha WR 450 F

1 Answer

Gilera Runner very difficult to start cold,then cuts out when hot


to check the electric choke..take it/off out of carb & unplug it. then get 2 short lenghts of wires, strip both ends...shove one end into the choke plug teminals(one in each hole) .then put one of the striped ends of thewires on a charged battery(one on the positve & one on the negitvie terminals) .keep them on for about 5 mins & you should see the choke head extend (you could always mesure it befor you put to battery & check in 5mis to see if extened!!) this will tell you if its working!!...if its not working this will explane why you have trouble starting from cold!!..it also sounds like the main jet is blocked...this is found by taking of the float bowl (as you may know!)it will prob be the small hole up the middle of the jet that is made up with muck!!...try sticking a strand of a wire brush up/threw it...also it sounds like the exhaust is leaking round the maifold..will have to take exhaust of & check if it need a new gasket..or resealing!!(does the exhaust blow?. this is good way to tell if it is leaking(put a rag/palm of hand over end of exhaust & you should beable to hear it blowing. ...hope this helps....Howard

Dec 14, 2009 | 2005 Gilera Runner VX 125

1 Answer

Engine runs rough and istrument Gages not working


It sounds like you need to inspect the wiring harness and look for broken wires and any wires that are hanging they may not be connected, the black exhaust is caused by a choke plate that is not opening on the carb the electric choke is not getting any voltage through the wire or the choke plate is out of adjustment it should be wide open after 5 minutes of running, check the fuses to be sure there is no blown fuses and check the wire that goes to the carb. to ensure it has 12 volts.

Dec 02, 2009 | 1985 Ford F150

1 Answer

It has to much fuel comeing out the exaust smells very raw.Change the fuel regulator diaphram but still the same . It dies when I stop but it will start back up.Has a2.1 I beleive. Please help it would be...


try changing the CTS ( coolant temp sensor ) It acts like a choke and could be telling the computer to dump excessive fuel .. Ive seen that before on those...

Mar 08, 2009 | 1991 Pontiac Trans Sport

Not finding what you are looking for?
1992 kawasaki GT 750 Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...