Question about 2003 Suzuki RM 125

1 Answer

Can not locate the crankcase oil check bolt on my 93 rm 125

I can not locate the trans/crankcase oil check bolt on my 93 rm 125? all the bolts on the crankcase seem to be fastners? and my manual does not show detail for my moter for the check oil bolt. also is it ok to change brands of oil or how do i make the switch to a different brand? thanks for the help!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 850 Answers

Hi, firstly look on left side near cylinder base for a cap !its not a bolt[way too big] & usually has a bar arrangement so you can get hold of & twist it!
dont mix oil brands! use a TOP quality oil
as its the only insurance you can apply to it!
[ cheap oil kills engines] use what you can afford! & stick with it!

Posted on Jul 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I CANT FIND THE OIL DRAIN PLUG ON 2003 RM85. I LOOKED UNDERNEATH AND I DONT SEE A DRAIN BOLT.


On the right of the engine crankcase (as sat on the bike) there is the oil filler cap. Further down under a pipe is a drain screw. This is what you are looking for.
Numbers 6 and 14 of the attached (hopefully) link.
http://www.bikebandit.com/oem-parts/2003-suzuki-rm85-rm85k3/o/m147673#sch267790

Feb 17, 2016 | 2003 Suzuki RM 125

1 Answer

How do i change the oil?


Details vary according to the model, but generally:
1. Run the motor long enough that the crankcase is warm.
2. Put the bike up on the center stand.
3. Put a plastic dish/bowl that will hold a few liters underneath the oil drain (usually a bolt on the bottom of the crankcase, check a manual for exact location. )
4. Using the correct wrench, loosen the oil drain.
5. With rubber gloves on, hold the bottom of the oil drain bolt with one hand while you remove the bolt from the bike with the other hand. If the bolt (which may be magentized) has bits of metal clining to it, remove these with a cloth or paper towel.
6. The oil will drain into the pan. Rock the bike back and forth gnetly to get the last few drops out.
7. Now locate the oil filter and remove it (check manual again for how to do this). Replace with fresh filter.
8. Replace oil drain bolt, tightening to correct setting.
9. Fill with fresh oil to the correct amount. Bike should be ready to go.
10. Put used oil into container with lid, have it recycled at a grage or auto service scentre.

Nov 23, 2014 | Motorcycles

1 Answer

Splitting the case on an 02 rm 125 got all the bolts visible on outer case just wondering if theres bolts under the clutch housing to be undone before i split


Normaly you can remove the left crankcase on its own, however if it is proving difficult to split it is possibly tight in the crankshaft main bearing, you will need to remove the clutch at some point during this rebuild so do it now while you have the stability of the engine cases , undo the nut securing the crankshaft pinion on the r/ h side, the crankshaft is often easyer to remove from this bearing, also it is easyer to reasemble the engine and gearbox when previously dismantled correctly. Paul

May 30, 2011 | 2003 Suzuki RM 125

1 Answer

What is the proper way to check transmission oil level on my 03 rm250


Hello. The engine and the trans do NOT use the same oil. The engine oil is premixed with the fuel. The transmission oil is filled with the filler plug on the right side of the engine case. Look under the kick stand, see the 850 ml marking? The trans holds that much oil. Either drain the oil and add that exact amount.... OR you can take out the check screw located lower and forward of the oil fill on the case, should look just like a case bolt, but with an aluminum washer to seal it. Once you remove this bolt/plug you can add oil till the oil flow out this hole. Joe

Jun 09, 2010 | 2003 Suzuki RM 250

2 Answers

How do i check the transmission oil levl in my 2003 RM 250


The engine and the trans do NOT use the same oil. The engine oil is premixed with the fuel. The transmission oil is filled with the filler plug on the right side of the engine case. Look under the kick stand, see the 850 ml marking? The trans holds that much oil. Either drain the oil and add that exact amount.... OR you can take out the check screw located lower and forward of the oil fill on the case, should look just like a case bolt, but with an aluminum washer to seal it. Once you remove this bolt/plug you can add oil till the oil flow out this hole.

Feb 21, 2010 | 2003 Suzuki RM 250

2 Answers

How much oil do i put in the clutch case of my 2000 rm 125?


On the right side of the motor there should be a bolt with a crush washer behind it. Hold the bike straight, pull that bolt out and fill with oil slowly. Once a good solid amount of oil comes out, install that bolt with a new crush washer. Chaz- Moto DC

Jan 22, 2010 | Suzuki RM 125 Motorcycles

1 Answer

2001 rm 125 transmisson oil level


It does have a small bolt on the clutch cover, with the bike standing straight up, fill it untill the fluid runs out of this hole.

Aug 18, 2009 | Suzuki RM 125 Motorcycles

1 Answer

2002 suzuki rm 125 shift drum placement, shifting problems,


go to your local shop and ask them to photocopy you pages out of manuel for setting of shift drum

Jul 09, 2009 | 2003 Suzuki RM 125

1 Answer

What gear oil do i use and how much for a 1993 rm 125


either 80 or 90 weight gear oil should be fine. and it either has a sight glass or more likely a check bolt to fill it to. it should take less than 1 quart

Jun 10, 2009 | 2003 Suzuki RM 125

Not finding what you are looking for?
2003 Suzuki RM 125 Logo

Related Topics:

575 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...