My bike is not firing right so my husband said the valves need adjusted. however i am unable to find the specs for what the valves should be set at. i know it has to be tdc. My bike is a 1994 suzuki 250 4x4 king quad
SOURCE: adjust the clutch
to adjust the clutch on suzuki king quad 1999 locate the oil filter on the right side of the bike look for three bolts with a bigger one in the middle of the threethe middle srew will open up a nut and a set screw in the middle loosen the the nut and turn the the adjustment screw while you are in first gear . hope this helps you
SOURCE: Briggs and Stratton OHV V-Twin 24hp repetitive valve adjustment
Try pulling out the choke a little, if it stops backfiring the mixture is too lean, check the intake
pipes at the cyl head and also the plastic runners to the carb for leaks.
Dennis in Chicago
SOURCE: valve adjustment
tiburon uses hydrolic lash adjusters there are no valve lash adjusting If you hearing a pecking sound on the top of the mtr try some oil additive or replace the hydrolic lash adjusters
SOURCE: craftsman 17,5hp valve adjustment
They may have it at www.briggsandstratton.com ...i hope this will help.....Keith
SOURCE: I need valve specs oor timimg adjustment for the
Go to this site and you can download a free PDF service manual.
www.carlsalter.com/motorcycle-manuals.asp The closest in the list is a 2003. This will work perfectly well for your repairs. Yearly changes are normally cosmetic and don't affect the mechanics.
Can I get a “very helpful” rating on this answer? Thanks!
71 views
Usually answered in minutes!
×