Question about 1989 Yamaha FZR 1000

1 Answer

I have sorta the same problem

My fzr 1000 was starting and running then i got back home and went to start it and the starter switch would not start it I was able to push it and pop the clutch a few times to get it to start, but now it wont do that and the 20 amp fuse for the head/headlight keeps blowing

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 3 Answers

U prolly got a wire running strait to ground or a shor some where

Posted on Jul 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1989 fzr1000 exup What is the best way to fit a starter clutch repair kit


Hi, Simon sorry you can't find the first and best tool you ever bought for your Yahama despair, not for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Starter spins but doesn engage FIXED The FZR Forum
https://www.youtube.com/watch?v=PDckQvAR89k
https://www.tradebit.com/filedetail.php/243740163-1989-1995-yamaha-fzr-1000-genesis-exup-fzr1000
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-fz-owners-manuals

Jan 24, 2013 | 1989 Yamaha FZR 1000

1 Answer

I have a 93 yamaha fzr600 will not start cant even jump start what is the problem


Hi, John and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty jiffy stand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have nice a day.
FZR Won Start The FZR Forum
93 FZR 600 wont start
https://www.tradebit.com/filedetail.php/269137237-yamaha-fzr600-1989-1999-factory-service-repair-manual
OEM parts for Yamaha
http://www.fzrarchives.com/fzr600/600_manual/1999fzr600r.pdf

Dec 22, 2012 | 1993 Yamaha FZR 600

1 Answer

Fzr 1000


Hi, Andre you may have a faulty starter button and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty jiffy stand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have nice a day.
FZR Won Start The FZR Forum
troubleshoot motorcycle not starting
https://www.tradebit.com/filedetail.php/243740163-1989-1995-yamaha-fzr-1000-genesis-exup-fzr1000
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-fz-owners-manuals

Sep 07, 2012 | 1989 Yamaha FZR 1000

1 Answer

1993 yamaha fzr 600,started bike and went down road,bike lost power and still no power,battery has power but no power when i turn key on


Hi, Russell and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty jiffy stand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have nice a day.
no power to my ignition when turn the key
FZR Won Start The FZR Forum
https://www.tradebit.com/filedetail.php/269137237-yamaha-fzr600-1989-1999-factory-service-repair-manual
OEM parts for Yamaha
http://www.fzrarchives.com/fzr600/600_manual/1999fzr600r.pdf

Aug 31, 2012 | 1993 Yamaha FZR 600

1 Answer

1996 fzr 600 wont start


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Security alarm needs a reset.
10. Starter control circuit, relay, or solenoid faulty.
11. Main fuse or circuit breaker may be blown or faulty.
12. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
13. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
96 fzr 600 wont start pleeeze help me
My 1993 Yamaha FZR 600 Won Start
Yamaha FZR 600 Service Manual
OEM parts for Yamaha
http://www.journey.cz/moto/navody/Yamaha%20FZR%20600%201999%20owners%20manual.pdf

Mar 06, 2012 | 1995 Yamaha FZR 600

2 Answers

My bike wont start and soon as i turn the engine run switch i hear something under my seat start clicking what is that??


Its probably your starter relay or possible your fuel pump starving for fuel... the starter relay is under your seat behind the battery and the fuel pump is under your tank...

Feb 01, 2010 | 1990 Yamaha FZR 1000

1 Answer

XV1100 virago ...sputtering, dying...NOT FZR!!


1 maybe there is a diaghfram tear at your carb only 1 is funtioning and 1 block engine is running but under power
2.check your fuel line from tank to fuel filter then pump then carb
probally there is a debrie stuck in the pipe line or in your tank

May 11, 2009 | 1990 Yamaha FZR 1000

Not finding what you are looking for?
1989 Yamaha FZR 1000 Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...