Question about 2002 Honda CR 250 R

2 Answers

Need electrical diagram

My son has just had the bearings replaced on his gillera runner 50cc sp he has put engine back on his bike but can not remember how the electrics connect to each other please have you a diagram its an 04 plate but i think electrics had to be changed when he had a 02 engine put in it but im not sure if they changed electics on bike or the engine.please have you a diagram that could help

Posted by on



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,689 Answers

Here is the diagram

and the actual mechanic service manual if you need it.

Posted on Jul 16, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do i find out what year honda cr 250 motor i have?

Posted on Nov 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

2012 Gilera Runner SP 50 loses power when warm

Hi, Moatez and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
ET4 50cc losing power when hot full throttle scooter forums com
Power Loss Help
Gilera Runner RST 50 SP Service Station Manual
Gilera RUNNER SP 50 2006 Parts

Jan 28, 2018 | 2011 Gilera Runner SP 50

1 Answer

2010 Gilera Runner ST 125 steering bearing knocking and wheel wobble

Hi, Mark you need to find a new place to take your bike the current technicians are incompetent for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How To Check And Adjust Your Motorcycle Steering Head Bearings MC GARAGE
Steering head bearings how to replace and adjust
Gilera Runner RST 50 SP Service Station Manual

Oct 31, 2017 | 2010 Gilera Runner ST 125

1 Answer

Pull start assemmbly for a 50cc engine

need diagram of how to put the pull start back in to the housing

May 17, 2012 | Quad 47 cc / 49 cc Pocket Mini Bike...

1 Answer

Changed carb engine running ok but no drive when i went to ride it please could you help me kind regards bri.the model is a gillera stalker 50cc

Check your carb if there is enouch deposit of gasoline , if non then you need to clean your carb or you might need to change your jet needle.

May 20, 2010 | Motorcycles

1 Answer

My gilera runner 180 sp incounter extra noise when in high rev. just like a bearing noise how to fix these noise

u need u bottom end bearing replaceing u will need to striping and split the engine in half i wwould recomend u taking it to a shop or look for replacement engine

Sep 20, 2009 | 2005 Gilera Runner VRX 200

1 Answer

Hi, I brought a Gilera SP Runner 50cc, second hand the day after whilst on a test drive it cut out and wouldn't start, i've replaced the bearings and also the head gasket. The scooter starts up fine now...

hi,the problem which you are facing has only 2 (two) reasons-
first,that the pistion rings are torn out and because of which the pressure is not building in the cylinder.for this change all the 3 rings as they come in a set of 3.

secondaly the valves of the engine are wotking properly or broken.
for this you need to change the valves of the engine.

I would recommend you to ask the mechanic to check the timing chain as this chain roates the valtes through a cam drive,and if the chain has problem then the opening and closing of valves would not be on time.So,its an very critical part of any engine.

do these things and your problem will be solved


Jul 23, 2009 | Gilera Runner VX 125 Motorcycles

2 Answers

Gilera runner 50cc wont start

Don't do the gas down the spark plug thing. It's a bad idea. Do the following >
Remove the water trap bowl at the bottom of the petcock, (gas valve). Is there any water or trash in the bowl? Drain a cup of gas from the tank. Is there any water or trash in the cup? Dump it, clean it and re-mount it, ( not all bikes have a water trap bowl ).

Drain the carburetor. There should be a screw on the lower side or bottom of the carb float bowl. Remove the screw then replace it after the fuel drains. Turn the gas back on and wait a minute for the carb to fill with gas. Install a new stock NGK spark plug and try to start the engine. If the bike doesn't start and run properly then shut off the gas and remove the carburetor from the engine.

Remove the float bowl and clean the entire carb with a spray carb cleaner from the auto parts store. Wear protective goggles to avoid getting spray in your eyes. Spray into all the little airways and fittings in the carb. Remove the idle screw and the air screw on the outside throat of the
carb and spray into the screw holes as well.
Be sure to put these two screws back in the same hole they came out of. IMPORTANT > do not tighten these two adjusters down. Only screw these in until they LIGHTLY seat. Now turn each adjuster one and one half turns outward. Put the rest of the
carb back together, clean the air filter and install the carb. Let the float bowl fill then start the engine. This process should get you back on the road.

Please rate this solution. Thanks!

May 25, 2009 | 2005 Gilera Runner VX 125

1 Answer

Gear box oil my bike cuts out at top speeds

the gear box oil does not go helps to lubricate the gear surface.its located at the rear .pls check your carb and spark plug.if two item is o.k check your engine block is there any crack at your engine

May 09, 2009 | 2005 Gilera Runner VX 125

1 Answer

I need the timing and mixture settings for my gilera runner

put the stock air filter back on if not adjust your air mixture screw

Apr 25, 2009 | 1989 kawasaki GPX 250 R

Not finding what you are looking for?
2002 Honda CR 250 R Logo

Related Topics:

637 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4818 Answers


Level 3 Expert

78919 Answers


Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides