Motorcycles Logo

Related Topics:

maurice wright Posted on Mar 09, 2016

I have a hawk 250cc Chinese dirt bike with 80 mph on the speedometer but I only can get it to 50mph what could I do to get it to 80mph

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a hawk 250cc chines dirt bike with 80mph on the speedometer but I only can get it to 50mph what could I do to get it to 80mph

A carburator jetting and cleaning. Also an ignition improvement. U need a clymer shopmanual or go to a motocross speedshop
Mar 09, 2016 • Motorcycles
2helpful
2answers

What is the top speed of a 2002 Honda CR250R 2 stroke?

The only figure I could find was 70 mph. But from all the research, what the bike is known for is power and reliability. It is also extremely strong and can take a tremendous pounding. It is right up there with the comparative Yamaha'sn Suziki's and the KTM. Good ,uck.
0helpful
1answer
0helpful
2answers

Loss of power at 50mph + Engine and truck shake

I would check the fuel filter, it should be changed every 20,000 miles or so. Also I would check the fuel pressure at the test port. I would also check for a weak ignition coil.
0helpful
1answer

My zzr 600 1994 wont go past 80mph if it reaches that. at about 70-80 mph if the throttle is pulled a little far too open acceleration stops, a reduction in throttle increases power and then slows it down...

what condition is your air filter in? put in some new plugs and go from there. if the air filter and new plugs don't fix the problem check yorclutch adjustment.
2helpful
1answer

2007 GSXR 600: So I'm on the freeway going about 80mph and my bikes speedometer goes to (--) and loses all power. I then am able to start it back up and ride it 3miles home but on the way it does the same...

Howdy: I have had the same problem and it turned out to be a short in my kill button. When the bike would sart to vibrate (80mph) the slight shaking triggered a short in the kill button. Disconnect it and try it again at 80 mph. If not it is a open in the main fuse circuit that can kill all power. Also check your battery cable being loose. Good luck - Doug
0helpful
1answer

Power falls off about 70 to 80 mph.. And sounds like and old chevy with a miss at an even speed. -- timing ????

nope,,,,,try plugs first then tune carbs and a compreshion test wont hurt just incase its a piston or velve burt out,,,,,and whats wrong sounding like an old chevy at 80mph? thats how i sound!!!! at 80mph
1helpful
6answers

Max speed

mine did 76mph and i used Shell V-power but i weight 12stone so if your less then it will make a differance
Not finding what you are looking for?

859 views

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...