Yamaha fazer 1000 2005 I have adjusted cable
SOURCE: yamaha fsz 1000 i have a noisy clutch
make sure that you have enough oil in the bike. if so there is nothing to worry about. Ducati's have the same sound.
SOURCE: how to change the choke cable on a yamaha fazer
choke cables normaly last for ever, so it prob needs just a bit of oil. remove upper end of cable, tape a cone on it and pour some 20/50 into it. if it is broken, observe the set up and replace.
SOURCE: yamaha tw200 clutch
My 98 tw 200 has a switch that allows the engine to run with the kick stand down ,but if I put it in gear it cuts off.
SOURCE: How do you adjust the headlight verticaly on a
You can download a free service manual at
http://www.yamaha-motor-europe.com/community/service/manuals.jsp
It takes a few minutes to find the right page.
SOURCE: How do I adjust a new clutch cable on a 2005 Yamaha v star 1100?
The normal method is once the cable is lubed and located at the engine and lever ends, the cable adjusters at both ends need to be adjusted to give the correct inner cable slack. I normally apply grease to the outer sheath metal crimps (this ensures they move in the adjusters). I then make sure the engine end adjuster has a small amount of clearance between it and the clutch rod. The final adjustments are then made using the cable adjusters at the lever and engine ends. You need to have about 10mm free play at the lever end. Check the manufacturers hand book for the exact dimension. Please make sure you route the cable the same as the old one, also when you pull in the lever it should close quite sharply when released. If it returns slowly or is stiff to operate then recheck cable route and try adding more lube to the inner cable.
Testimonial: "Problem i have is the guy who dismantled it isnt here. The arm where the cable reaches th engine is off the bike i went to put it back on. And the screw and sleeve moved . Dont know proper way to adjust."
200 views
Usually answered in minutes!
×