Question about 1996 Honda CBR 600 F(3)T

3 Answers

I checked the fuses and changed the bulb...still not working now what?

Posted by on

  • alanmarkle Jul 15, 2009

    My headlight

  • Eldric Venne
    Eldric Venne May 11, 2010

    What is not working?


3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is a connector under the dash that have most likely came loose.i had changed everything and the only problem was the connection for the dimmer switch. chek and see if the connector came loose hope this works for you as it worked for me. peace

Posted on Aug 18, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Power goes through the starter switch, then to the dimmer switch, then to the headlight. Often the starter switch is the problem. When you hit the starter switch, the headlight goes out to give the starter full power. If the headlight contacts in the starter switch get dirty or go bad, you lose power to the headlight.
If you lose just a high beam or just a low beam, it could be the dimmer or one of the headlight relays, but the starter switch issue causes both beams to stop working.

Posted on Aug 06, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert whose answer got voted for 20 times.

  • Expert
  • 190 Answers

Also check the dimmer switch on handle bar

Posted on Jul 15, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I changed the bulb on the passenger side dimer but it still not working.

The fuse my have blow when the bulb did, check and see if you have power and ground at the dome light, if so, check the new bulb for continuity , if not, check the dome light fuse.

Dec 06, 2015 | 2006 Nissan Altima 2.5

1 Answer

Head lights work brake lights don't, have changed brake switch and bulbs and checked fuses

When you say you checked the fuse, are you getting power in and out of it and the brake light switch ?

Jan 04, 2013 | 2003 Jeep Liberty

2 Answers

Roof light stopped working

Fuses do not cause bulbs to burn out. You probably have a defective light fixture.

May 28, 2012 | Cars & Trucks

1 Answer

Driver's low beam headlight blows the fuse

try another fuse. check that all bulbs work. If fuse blows again in a short time, you have a short in that circuit- a broken wire or wire that lost insulation and is contacting metal. It may or may not be near the bulb you replaced.

Oct 27, 2011 | 2005 Nissan Altima

1 Answer

My right head lights are out on my 86 pontiac parisienne, is it the fuse?

The fuse is always the first thing to check when you have a problem. It does no good to change the bulb and find out that it was a fuse. I would try to change the fuse first. If that does not work, you can try to change the bulb. I would run down to an autoparts store and tell them what problems you are having. They should be able to provide you with a fuse or check the fuse for you. If that still does not work, the bulb needs to be changed. Hope this helps! Please feel free to contact me with any questions you have.

Apr 25, 2011 | 1984 Pontiac Parisienne

1 Answer

Headlights wont work even with bulb replacement

dear sir

first open headlight box and remove the bulb and check by tester power supply (DC power supply ) Is coming there or not if its coming and bulb wont work then its problem in bulb if supply is not coming till headlight then check fuse box and other connector i think there any fuse is broken that's why headlight is wont working . change fuse after that headlight will work again

hope answer the question
thank you
please vote!

Oct 13, 2010 | Chrysler PT Cruiser Cars & Trucks

2 Answers

Tail lights do not work all lights work but the back lights do not work. I change the fuse but lights still don't come on. all the other lights work is there other fuses i need to replace

if the bulbs are ok! check bulb socket to see if you have power.with test light, if not make sure sockets are clean. check the bulbs first, because they are a double filiment bulb. for brakes and tail lights. did you change the correct fuse!! it is located in interior fuse box on drivers side end of dash. its on bottom left side of fuse box. its labled "stp lps". hope this helps,

Aug 13, 2010 | 2000 Chevrolet Malibu

Not finding what you are looking for?
1996 Honda CBR 600 F(3)T Logo

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75817 Answers


Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides