Question about 2004 Aprilia Scarabeo 125

1 Answer

Rear wheel removal just need to know if the threads are oppisite i can't seem to get the nut loose

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Aprilia Master
  • 42,901 Answers

Hi, Suemmike9809 threads should be regular and I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
DOWNLOAD 2004 Aprilia Scarabeo 125

Posted on Oct 24, 2015

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 22 Answers

SOURCE: I have no workshop manual

Heres the manual :)

http://www.scribd.com/doc/26667710/Aprilia-Sportcity-125-200-04-Manual

Posted on Feb 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove steering wheel 1996 ford courier


once you have removed the centre cover from the steering wheel you will have to remove the lock clip above the large nut holding the steering wheel to the steering shaft. loosen the nut enough that the nut is still threaded to the shaft at the top, then using a puller pull the wheel loose from the shaft. if you don`t have a puller you can hit the top of the steering shaft with a hammer and it should pop loose.

Aug 23, 2014 | Cars & Trucks

1 Answer

Replacement of wheel bearing 2004 saturn ion


Put the car's front on jackstands(front suspension hanging down) and chock the rear wheels.Remove the tire/wheel.Remove the bolt/nut for the lower balljoint.Remove the cotter pin on the large spindle nut.Remove the nut(you'll need a 1/2 or larger impact gun with the correct impact socket).Dislodge the ball joint from the knuckle(a large punch rapped on the sides of the knuckle hole will help to break it loose).Lower the control arm and pull the knuckle outward(the axle shaft should now slide out).Now you should be able to remove the bolts that retain the bearing assembly.Reassemble in reverse order,thread locking compound on the bolts for the bearing is probably a good idea.

May 25, 2012 | 2004 Saturn ION

3 Answers

How to stop shaft from turning to remove nut and replace wheel


If you put a wrench on the nut on the other end of the shaft, you have a 50/50 chance that the nut you want loose will come loose. If the wrong one comes loose, you can remove that nut completely (and the wheel) then take the nut with you to the store to buy another one. Then put two nuts back on and tighten them together as a jamb nut. Then try again. If the wrong nut still turns, you have to tighten the pair of nuts together tighter. good luck

Oct 08, 2010 | Craftsman 10" Bench Grinder

1 Answer

How do u fix a rear stud on a 1999 Nissan Maxima


You will need to remove the Rear Wheel, Brake Caliper, and Rotor to replace the Stud. Once those are removed, take a Hammer and hit the Wheel Stud from the front to drive the Stud out through the back of the Wheel Hub. Once the Stud is out, take the new Stud and insert it in the Hub from the back. You will need to get a Open Ended Nut with the proper thread size as the Stud and thread it on the Stud, and tighten the Nut till the Stud comes all the way through the hole and the end of the Stud is flush with the back of the Hub. Remove the Nut and you can now put everything back together.

Jul 15, 2010 | 1999 Nissan Maxima

1 Answer

Im trying to replace my rear axil on my polarise trail boss 2001 it is fighting me need help


You will need a pair of 1 3/4 inch open end wrenches the axle nuts are secured with loctite and torqued to 150 ft/lbs. secure the polaris with blocks so it will not move, Loosen the rear wheel nutswith it on the ground, jack up the rear and support it, remove the rear wheels and hubs, loosen the axle locknut away from the axle nut, then take the axle nut and washer off, the drive chain sprocket and sprocket hub can be left where they are while the axle is driven out,just be prepared to support their weight as the axle passes through the hub, clean any foreign materal from the right side of the axle so it wont be pulled into the eccentric during removal. install the right wheel hub and thread the nut untill its flush with the end of the axle to protect the threads, tap on the right end of the axle with a soft faced hammer to free it, then remove the hub and pull the axle out. Hope this helped.

Mar 16, 2010 | Polaris ATV

1 Answer

2002 ford explorer rear wheel bearing removal


Rear Wheel Bearing
REMOVAL AND INSTALLATION

1. Remove the wheel knuckle.

Wheel Knuckle
REMOVAL AND INSTALLATION

CAUTION: Do not loosen the axle wheel hub retainer until the wheel and tire are removed from the vehicle. Wheel bearing damage will occur if the wheel bearing is unloaded with the weight of the vehicle applied.

1. Remove the wheel and tire assembly.

NOTE: Have an assistant press the brake pedal to keep the axle from turning.

2. Remove the nut and washer and discard the nut.

3. Remove the parking brake shoes.

CAUTION: Do not damage the boot while separating the toe link from the knuckle.

4. Remove the nut and bolt and separate the toe link from the wheel knuckle and discard the nut.

CAUTION: Do not damage the boot while separating the ball joint from the knuckle.

5. Remove the nut and bolt and separate the upper ball joint from the wheel knuckle and discard the nut.

CAUTION: Do not use a hammer to separate the outboard CV joint from the hub. Damage to the threads and internal CV joint components may result.

6. Using the special tool, press the outboard CV joint until it is loose from the hub.

7. Remove the nut and bolt and the wheel knuckle, hub and bearing as an assembly and discard the nut.

(Return to)
Rear Wheel Bearing
REMOVAL AND INSTALLATION

2. Remove the three bolts.

CAUTION: Make sure that the press adapter outside diameter is slightly smaller than the hub outside diameter or damage to the knuckle will result.

3. Using a suitable press, remove the hub from the bearing and discard the hub.

NOTE: The retainer ring is tapered and must be installed flat side down.

4. Remove and Discard the retainer ring.

5. Using a suitable press, remove the bearing from the wheel knuckle and discard the bearing.

CAUTION: The hub and bearing cannot be reused after disassembly.
To install, reverse the removal procedure.

Jan 24, 2010 | 2002 Ford Explorer

2 Answers

My Piaggio Vespa 125cc rear wheel has slight play. What could this be?


no panic - this is typical for the old 2stroke Vespas as their gearbox is on the rear axle....(needs no belt like the newer ones)
-but then there is a certain amount of play needed...
piaggio-vespa-125cc-rear-wheel-slight-wq3avpzkaaw4sd2xavwlekgs-3-0.jpg

Jan 14, 2010 | Peg Perego Vespa Scooter

1 Answer

How to change stud in rear wheel hub assembly. i need to know how to change the stud in the rear wheel hub assembly, and how do i go about taking it apart


Remove tire and wheel, remove caliper and brake rotor. DO NOT apply the brakes while the caliper is loose. Hit stud you want to replace hard with a LARGE HEAVY hammer to drive it out towards vehicle. DO NOT use a light hammer. It will distort the stud and possibly mushroom the end making it very difficult to remove. Once the stud is loose, you may or may not have enough room to get it out of the hole. You may need to pull the hub loose from the rear suspension to gain more room. Remove the stud. Place new stud in hole. Put a stack of washers over the stud, grease the threads, and using a new FLAT nut with the same threads as the lug nut, tighten until the stud is pulled all the way into the hub. Remove the flat nut, reattach the hub assembly (if you needed to take it loose) and reinstall the brakes.


Sep 28, 2009 | 1994 Ford Probe

1 Answer

How to remove rear wheel lug bolts


Take wrench and put on nut, loosen nut, take nut off the rest of the way, do this till you have no nuts left, take tires off, put nut on the bolt just on the end covering the threads and pound them out with a hammer, pull new ones back in with the nuts.

Apr 01, 2009 | 2004 Ford F350

2 Answers

I am trying to remove and replace the motor on a whirlpool dryer. i bought the unit new in 1994. i can't seem to get the motor shaft loose. i am trying to turn the shaft in the clockwise direction and with...


check the end threads of the new motor are the not left hand threaded, if so you are tighhtning turn the oppisite direction
btw you may have to replace the blower if it cracked the blower when the plasitc came off might have to use vise grips to ge it off

Apr 26, 2008 | Dryers

Not finding what you are looking for?
2004 Aprilia Scarabeo 125 Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aprilia Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Aprilia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...