Question about Harley Davidson FXDWG Dyna Wide Glide Motorcycles

2 Answers

I'm installing a harley mini tach ( 3 wire ) on my 2005 carberated fxdwg.. I just need to know is there a signal wire under the dash or do I run it to the coil? And what color is the wire.. nobody can give a strait answer.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

There should be a light green or violet wire coming from speedometer this is your database wire. This is were you hook up your last wire. Hope this helps, from 04-to 07 the wires are pretty much the same color.

wires from speedometer:

light green/ violet = database
black= ground
orange/white= inst power+12vdc

Posted on Oct 23, 2009

  • scorpion2413 Oct 25, 2009

    Also if you go to HD site and find the tach that you bought and view it it has a pdf file that tells you how to find the pins to connect to.

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Tach on harley is usually pink

Posted on Jul 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 HD FXDWG tachometer not working properly


Hi, Harald check all wiring and connectors coming from the tach to the ignition switch for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
speedo and tach not working
Harley Davidson Dyna Glide Service Manual
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://www.harley-davidson.com/content/h-d/en_US/home/owners/maintain-your-bike/owners-manual.html
Instant Tech Relief To speak to me personally absolutely "FREE"

Jul 02, 2017 | Harley Davidson FXDWG Dyna Wide Glide...

1 Answer

Tach signal wire


The tach wire will be a pink wire under the wire loom leading up to your speedo. It's usually tucked into the conduit. If you don't have it there, then you'll have to run one all the way to the ECM.

Nov 29, 2013 | 2009 Harley Davidson FLSTC Heritage...

1 Answer

2005 harley fxdwg brake light works, tail light does not. replaced bulb, replaced tail light cover ?


The brake and running lights should run on separate wires from under the seat, through the hole in the rear fender and into a connector on the rear tail light cover. Your turn signal wires run the same path. These should all be clipped into place under the fender. I would look for a broken wire under the fender, especially at the point of the clip, or a corroded terminal in the tail light housing. The open wires are suseptable to rear wheel thrown road debris. You have easy access for a wire continuity test from the plug under the seat to the tail light cover.

Oct 22, 2011 | 2005 Harley Davidson FXDWG - FXDWGI Dyna...

1 Answer

Wiring diagram for mini tachometer kit


Most aftermarket tachs have 3 wires. 1 is the 12 VDC "power", 1 is a black ground wire, and 1 wire provides the "signal" to the unit from the secondary side of the ignition coil.

Sep 25, 2010 | Harley Davidson FXST Softail Standard...

1 Answer

No turn signals, horn, speedo,with a ''red key '' light on the dash?


Hi Jesamarco, you may need an alarm reset, for more information about your question please visit the websites below. Good luck and have nice day.
Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Sep 07, 2010 | 2005 Harley Davidson FXDWG - FXDWGI Dyna...

1 Answer

I am instaling a tach on my wifes 2009 street bob


i think its the pink and white one,on my 2000 deuce it was located under my seat

Jul 06, 2009 | Harley Davidson FXDL Dyna Low Rider...

1 Answer

Tacho stopped


I believe the fuelpack uses the tach signal in its operation. For some reason yours is not passing this signal thru to the tachometer. I'd get in touch with the manufacturer. I'm not sure if there is some setting that can turn off/on the signal pass thru, or that your fuelpak is faulty.

Nov 20, 2008 | 1993 Harley Davidson FXR Super Glide

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

1,159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...