Question about 1995 Honda CBR 250 RR

1 Answer

Cbr 250 wont idle without choke

Runs fine while riding but if you have to stop at lights or juntions you have to pull on choke

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 521 Answers

Dirty carbs. Remove from bike and disassemble each carb and clean them thoroughly. one or more of the small passageways in the carb can be clogged with a small piece of dirt or eve carbon build up. Stale fuel will "gum" them up to

Posted on Jul 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my 2005 yz250f run without the choke on


Hi, James and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Float needle and seat sticking.
5. Float level too low.
6. Carburetor bowl vent line clogged/blocked/pinched.
7. Idle adjusting screw set too low.
8. Air/fuel mixture screw set too lean.
9. Idle port, transfer ports, slow air jet clogged.
10. Slow fuel jet clogged.
11. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need please Click on blue links below. Good luck and have a wonderful day.
04 YZ250F Runs but only with Choke pulled
2001 YZ250F only runs with choke on
YAMAHA YZ250F LC Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jun 12, 2012 | 2005 Yamaha yZ 250 F

2 Answers

I need to pull the carbs off my 1995 yamaha fzr600


You need to remove the seat,tank, air filter box and anything else to get to the clamps to remove them. Then clean them and reinstall them have them synchronized.if you are unsure take it to a shop.at the end of the riding season put alot of fuel stabilizer in it and run it over the winter when possible.

May 22, 2017 | Motorcycles

1 Answer

My cbr 600 f2 1993 had been sitting for a long time


Sounds like the carbs were not properly cleaned or set up. Choke should cause the cold start rpms to be higher than what you are experiencing. Application of choke to a warmed up engine will usually cause the engine to stall.

Jun 28, 2010 | 1994 Honda CBR 600 F(2)R

1 Answer

Ltz 250 wont idle needs full choke to run.cleaned carb all jets new diaphrams. cleaned air filter and all hoses. backfires and hesitates half and full throttle.


hi,sounds to me like the air fuel ratio is all up the ***,locate the air/fuel screw on the carb(normally on the side)screw the screw right in untill it stops,then back the screw out 1.5 turns,this should get the bike to run without the choke,once you have the bike running simply turn the screw in or out untill the bike settles into a nice steady idle,should be good to go,hope this helps...cheers

Mar 22, 2010 | 2005 Suzuki 250 SB

1 Answer

I have a vtr 250 that i cant keep running, it will start but as soon as the choke is taken off and i let it idle it stops, even taking it for a bit of a ride around the yard to warm up wont keep it going....


Try to adjust the idle speed Mr.If your bikes been sitting over winter there could be a blockage in the idle circuit in your carby,in which place it will need to be cleaned.....Was i helpfull??. hope this helped.

Dec 02, 2009 | 1999 Honda VTR 250

2 Answers

Bike wont idle without choke


you need to take your carb off give it as good cleaning. also check your intake gaskets where the manifold joins the jugs and the black rubber one where the carb joins the manifold. You def have air/fuel problem going on. also check your vscume hose to the carb but im thinking that is not it.

Sep 23, 2009 | Harley Davidson Harley-Davidson Motorcycle...

1 Answer

HondaCBR 250RR runs for 3 miutes fine then cuts out whilst riding


sounds like the float in the carb might be sticking stopping any more fuel getting through to the engine

Jun 23, 2009 | 1997 Honda CBR 250 RR

Not finding what you are looking for?
1995 Honda CBR 250 RR Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...