Question about 2008 Yamaha YZF-R6

1 Answer

Hard to change into 1 st and 2nd gear . quickshifter fitted . does engine have to come out to work at gearbox

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Remove the quick shifter and see if the shifting problem is still there. If so, you have a bent shift fork. Yes, the entire engine comes out and then the bottom case half is removed to gain acess to the gears and shift forks.

Posted on Jul 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Advice required re: Manual Gearbox Problem - Clutch drag symptoms when changing from 1st to 2nd gear.


problems with a clutch system will result in grating first gear or reverse gear as the input shaft is still being turned by the engine. 2nd gear is syncro operated so any mismatching of gear speeds will be overcome by the syncro ring of the gears. By double de clutching you state that the problem is eased somewhat and this indicates that the gear box is at fault ( shaft bearings, syncro rings, gear teeth ) hard movement of the gear lever would indicate failed gear cable ,linkage or gear lever pivot problems. What you describe is a gear box fault. I would take it back and tell them to fix it or exchange it . Keep all records of conversations and dealings as you may have to get legal help to have the shop full their warranty agreement. Time to remove ,repair and replace a gear box would not exceed 12 hours in an accredited shop

Nov 18, 2014 | Mitsubishi Lancer Cars & Trucks

1 Answer

Gear shifting problems in Honda Prelude with Automatic transmission only when gearbox is cold


While just change ATF oil or CVT oil in transmission & old filter too. your car problem will be solve....

Nov 21, 2013 | 1998 Honda Prelude

1 Answer

2nd gear is a bit hard when it goes in.... 1st and 3rd are smooth


Change gearbox oil, your car might not have had this performed in 15 years. If the problem is still there, then the 2nd syncro is worn. Replacement isn't as bad as it sounds, but would need a weekend and a few tools. Might even be worth fitting new gearbox if you prefer not to open the gbox, look in a breakers yard.

Vote for me please :)

Jun 28, 2010 | 1995 Ford Aspire

2 Answers

My peugeot 307 gear linkage counter balance


i can't change into 2nd,4th and reverse gears. i think its a gear lever cable not sure doe any ideas?

Dec 27, 2009 | 2005 Peugeot 405

1 Answer

Gearbox engagment


i cant solve this i got the same problem did u ever solve this. i have changed - clutch,slave an master cylinder and the gearbox has been rebuilt

Dec 11, 2009 | 2000 Mini Cooper

1 Answer

E46 M problem changing gears.


Its not advisable to just add fluid.. You must first determine if it is low..

Maybe concider getting the fluid exchanged if you have allot of miles on it..

It could also be that the syncronizer is beging to fail..

Hope this helps !!
rate me good ;o)

Jul 14, 2009 | 2000 BMW 3 Series

1 Answer

Clutch slips


Hello, wheelies mm not good for your gearbox or clutch, 1st off is the gearbox working OK, does it jump out of 2nd gear under hard acceleration? then we can move on from this point,
Ian

May 26, 2009 | 2004 Triumph Daytona 600

5 Answers

Mitsubishi Pajero Junior Automatic Gearbox Problem


I have a pajero junior 1997 4A31, I am having problems, with my gear, when take off in D the car is slow, and up hill no power in 2nd & D, in Load ok. Plse advise. Thank you.

Apr 01, 2009 | 1990 Mitsubishi Minivan

2 Answers

Mercedes a class gearbox fault.no gears


If you take it to mercedes they will charge £3500 and will replace the gearbox, Alternatively you can change the shifter valve £25, new sump and filter as they have changed, fit a magnet inside the gearbox as the early A didnt have one. Fresh oil and see how you get on, the control unit for the gearbox sits inside the gearbox £1000 roughly for a new one but it has to come from mercedes in germany where it is coded to your chassis number, 2nd control units are not an option!!!!!!!
jib
www.mercanic.co.uk

Oct 18, 2008 | 2003 Mercedes-Benz C-Class

3 Answers

Problems with gear box


Hi

If the clutch feels ok and isn't biting right at the bottom or right at the top then it sounds like its time for a recon or 2nd hand gearbox to be fitted.

I recently fitted a 2nd gearbox to a seat ibiza GTi which actually has the 2.0 Golf engine fitted to it and it wasn't too bad at all, but it is adviseable to fit a clutch kit whilst the box is off.

Very best regards

Geordie

Jun 05, 2008 | 1996 Volkswagen Golf

Not finding what you are looking for?
2008 Yamaha YZF-R6 Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...