Question about Suzuki Burgman 250 Motorcycles

Open Question

1998 suzuki burgman 250. Starter won't spin

1998 suzuki burgman 250. Is there a safety relay in the starter circuit and if so where is it? The starter died suddenly today, and I'm in the process of checking the individual components in the circuit. Thanks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3567 Answers

SOURCE: suzuki burgman 650 won,t change gear

Probably a bent shift fork. Not good news. Sorry.

Call the Burgman dealer And tell them what I said. See if they agree with my answer.

Then, please rate this answer. Thanks!

Posted on Mar 28, 2009

SOURCE: Suzuki Bandit 400 not starting

The starter motor could be the culprit, check the starter motor.

Posted on Apr 17, 2009

SOURCE: suzuki burgman 650 won,t change gear

I had the same problem until I found out that when you put the Burgman on it's center stand, it pushes a small round metal pin (spring loaded or something similar) that limits the Burgman to 1st gear only. Some kind of safety feature, I guess. You can see the little switch if you put the bike on it's side-stand, get down on the right hand of the bike and look where the centre stand meets with the body of the bike. My switch was stuck in permanent "on" so I just pulled the pin to it's full extention with a pair of pliars, then cut it with a junior hacksaw.

Posted on Jun 03, 2009

  • 3 Answers

SOURCE: suzuki burgman an400 speedo not working

There is a hmm Do not remember the english term, say thing down at the front wheel, sensor, That was the malfunction on mine. Second time t was the cable to the same sensor

Posted on Apr 15, 2010

  • 2 Answers

SOURCE: My 2005 Suzuki Boulevard Will not start most of

Same problem here ... 2008 C90T ... dealer no help ... in 3rd or 4th, ignition off, force it to roll backwards until you hear the piston shift ... should start then. Told it's the rear piston stopping at or near top dead center, but also told adjust the decompression will "solve" the issue; anyway, a rolling forward-start in 4th will work, too, otherwise try rolling the bike backwards until you hear, and you will know when the piston moves and then it will start.

Posted on May 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I not getting anything the Suzuki burgman 650 will not do anything


Hi, Duke before testing any electrical component in the Starter Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test because your battery may have 12.5 volts or more but little or zero amps causing the battery to be faulty and must be replaced, especially "AGM" batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter have failed or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://burgmanusa.com/forums/15-burgman-650/46583-2003-650-won-t-start.html
Scooter Troubleshooting Scooter won start All about Scooters
Suzuki AN650 Service Manual
OEM parts for Yamaha
Suzuki Burgman 650 2004

May 18, 2017 | 2005 Suzuki Burgman 650

2 Answers

I have a Suzuki Burgman 400 and I switched out the starter relay switch because it was clicking and a new one is doing the same thing


-The relay supply power to the starter before the starter can be turn.
-Remove the starter out and test to see it spin or not. Or any power out of the relay...? If no power out of the relay then the internal contact inside the relay is worn out.
-If there is power out of the relay but the motor just not spin
then the motor is defect.

Good luck

Mai

Feb 08, 2017 | Suzuki Motorcycles

1 Answer

2011 suzuki motorcycle s40


Hi, Isaac and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
2009 Suzuki Blvd S40 won start
S40 won start new battery no power anywhere after kid drained battery
Bike won start Doesn click Lights work
Suzuki LS650 Savage Boulevard S40 Motorcycle Online Manual Cyclepedia

Aug 29, 2016 | Suzuki Motorcycles

1 Answer

Intermittent problem to start all lights are on but bike won't start


Hi, Mary and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty jiffy stand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://burgmanusa.com/forums/15-burgman-650/46583-2003-650-won-t-start.html
http://burgmanriders.com/forums/showthread.php/6957-2003-burgman-400-won-t-start
07 Suzuki Burgman 400 Starter Switch Problem
http://www.motorscooterguide.net/Manuals/Suzuki_AN650_Service_Manual.pdf

Apr 07, 2016 | 2006 Suzuki Burgman 650

1 Answer

1998 Honda Accord Won't Start


Park neutral safety switch maybe be the reason for the no crank ! Try putting the vehicle in park ,then try to crank the engine . Testing the electrical circuit is the best way to trouble shoot this problem , along with do a voltage drop test on the starter circuit ! This will test the battery cables an connections .
Starter Voltage Drop
How to voltage drop test starter motor circuit
Does it have a manual or automatic transmission ? Manual ? clutch switch . Looking at a wiring diagram I also see a starter cut relay !
http://www.bbbind.com/free_tsb.html Free wiring diagrams . Enter vehicle info. year , make , model and engine size . Under system click engine , under subsystem click starting . Then click the search button , then click the blue link ! Check the starter cut relay also . Videos on youtube showing how to test a relay controlled circuit !

May 29, 2017 | 1998 Honda Accord

1 Answer

My car does not start or turn over. The radio works and so does the fan.


When you turn the ignition key to start your car, voltage from the battery flows through the ignition switch to the Park/Neutral safety switch and/or brake pedal or clutch pedal safety switch (you have to push the pedal down before the circuit will complete) to the starter relay or solenoid. When the relay or solenoid is energized by voltage from the ignition switch circuit, it closes a contact that routes more power from the battery directly to the starter to crank the engine. The starter motor spins, pushes the starter drive gear to engage the flywheel and cranks the engine.

Low battery (Check battery voltage, recharge if low, or jump start with another vehicle or battery charger).
Loose or corroded battery cables (Inspect, clean and tighten BOTH ends of BOTH battery cables).
Bad starter relay wiring connections or ground connection (Inspect, clean, tighten wiring connections).
Bad starter relay/solenoid (Check for voltage at relay, if relay has voltage but there is no "click" when key is turned to start, replace relay).
Bad starter (Jump battery voltage direct to starter to see if it spins, or remove starter and have it bench tested at auto parts store).
Damaged starter drive or teeth on flywheel (Remove starter and inspect drive gear and flywheel teeth, replace damaged parts if necessary).
Bad ignition switch (Check to see if voltage reaches starter relay/solenoid when turn to start. If not, check for open P/N switch and brake or clutch pedal switch. Replace ignition switch if defective).
Open P/N safety switch, or open Brake Pedal Safety Switch (automatic transmission) or open Clutch Pedal Switch (manual transmission). Bypass switch with jumper wire to see if engine cranks, or use test light or voltmeter to check for voltage passing through switch when ignition is turned to start.
Engine seized due to bearing failure or internal damage (Use socket and long handle to see if engine can be turned by hand, if not engine is locked up).
Engine hydrolocked due to coolant leak from leaky head gasket (Use socket and wrench to see if engine rotates, remove spark plugs and see if coolant comes out or engine can not be cranked with plugs out).

Jul 14, 2010 | 1995 Suzuki Sidekick

2 Answers

Replaced starter relay but truck still will not start. Will start if I jump the relay. What else could the problem be.


The starter relay is energized by the ignition switch, through either the neutral safety switch, or the clutch safety switch.

Jan 16, 2010 | 1992 Nissan Pickup

1 Answer

My burgman 250 is a pain to start when cold


service your carb and fit a new air filter.
You might have a blocked start jet for the starting and possibly float level issues etc.for your mpg.

Aug 02, 2009 | 2001 Suzuki Burgman 250

1 Answer

I have a 1998 suzuki tl 1000 r and it will not start what do i need to do


Hi and welcome to FixYa,

By " will not start  " I presume you mean that the starter motor will not spin. If yes:
  • try with the clutch lever pulled in and/or the side stand folded up. If it works, then the safety interlocks have to be checked;
  • if there is a clicking sound, follow the battery cable from the battery's + terminal;
  • it would end in 1 of the terminals of the starter relay;
  • while pushing on the start button, short the 2 big terminals of the starter relay on the nuts (not on the threaded portion);
  • expect a big spark;
  • if the starter motor spins when shorting the 2 terminals, the starter relay is faulty;
  • if  no spin, then the starter motor is faulty, most likely the carbon brushes.

Should the above be not applicable yo your concern, please postback and describe fully the problem.

Goodluck and thank you for asking FixYa.

Jun 27, 2009 | 1997 Suzuki TL 1000 S

2 Answers

Wont Start it dont act like it is getting power to starter and starter button


If the starter button does not result in the starter motor turning, you need to get the wiring diagram for your specific bike (maybe in the owner's manual?) and do some checking. Check out the starter circuit (wiring, connectors, safety switches/relays, etc.) to get familiar with where everything is located on the bike. Check that the battery is fully charged. Hook up a voltmeter to the negative post on the battery and the the positive probe to the starter motor terminal. Turn on the ignition and press the starter button. If the voltmeter indicates around 12-13 volts when the starter button is pressed, then the starter is in need of repair/replacement. If no voltage is indicated, you need to trace back through the circuits (starter solenoid, safety switches/relays, connections) until you do get 12-13 volts. The place where it stops is the trouble area.

Feb 26, 2009 | 1982 Suzuki Gs 550 L

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...