Conatiner for mixing has two plastic notches broke off and machine will not spin what to do

Bar mix products made millions for world wide sales
kitchen aids that change design so often
they cant support a large parts division
(R&D is geared to sell the next better barmix product )


if you cannot find a new old part
or super ceeded shaft from the next model up
or used drive shaft for sale online

look for a complete used bar mix spice blender/chopper

some people collect barmix units for a hobby or collection
and sell double ups

when you say old model
if the shaft is plastic ....... its .unfix able
its a heat molded construction process


Vintage Bamix M122 2-Speed Hand Held Food Blender Mixer-Chopper

If it cannot be fixed, then you'll want to be looking at a new juicer.

If you're not sure if it can be fixed or not (as this is a common problem with some juicers and is quite fixable) then you'll want to contact the manufacturer and have them send you the appropriate replacement parts. Contact Omega at 800-633-3401

Omega Products website - http://www.omegajuicers.com/contact-omega-juicers/

Without seeing the part that is broken it is hard to say what exactly the problem is. But it sounds like it is one of the safeties. Look on the bottom of the jar to see if you can see where the plastic broke off of. If not then the plastic is probably the safety inside of the lower part of the unit.

mine just broke as well the hand blener is working but the piece on top of the inside lide broke off so as not to make a good attachment with handle where can i geta lid

I need the villaware smoothie maker top model V5785 as mine broke & can't find anywhere. Please help!

You need to contact a Russel Hobbs distributor in your area to order and obtain parts

please rate this help top keep our service online

Look at the underside of the blade shaft. The metal wing nut on the end of the shaft secures the blade assembly to cream coloured plastic blade base. The wing nut also transmits the drive from the rubber coupling on your blender to the blade shaft. The wing nut has a LEFT HAND thread.
The left hand thread ensures the blade assembly does not unscrew during normal blender use.

Firstly disassemble the blender blade assembly. Place a folded tea towel over the blades and hold the blades firmly. If you do not use a tea towel you may cut yourself.

Grip the wing nut with your other hand and unscrew it CLOCKWISE.
Remove the wing nut. You can now remove the blade from the plastic base.

Put the blade assembly in the new jug and offer up the plastic base from under the jug so that the blade shaft protudes enough for you to install the wing nut.

Screw the wing nut ANTI-CLOCKWISE to secure the blades to the plastic base.

Do not over tighten the wing nut; you may have to replace your jug again at some point.

I decided to replace the entire blender and I bought a new one online.

This site appears to have a lot of replacement parts:

http://www.theessentials.com/jump.jsp?itemType=INDEX&itemID=449&path=1%2C3%2C449%2C449

I have the double one two and need to replace both of the pitchers. Cant find them anywhere