I have a 2005 triumph daytona 650 I have to fix a oil leak and advice

Question edited for clarity and spelling.
Question moved to model category.

This is a situation where you need to hear the noise. In a car it can be slipping belts, or water pumps. On a bike I have heard is as a leak in the exhaust gasket. Hot gases blowing out 'squeaked. Other ideas here, it is a known issue.

https://www.google.com/search?q=2005+Triumph+Daytona+650+squeak

..

Do you have spark to the plugs? Do you have fuel getting to the cylinders?

Not sure about the 650, but on my 04 Daytona 600, is does the same thing, this is the engine check lights, and oil low lights being checked. IF you tried to start the bike it wouldnt, until this sefl test is complete.

Hope this helps.

Doubtful that is the cause.
Is the sensor faulty? Is there actually pressure there?

check the level when the bike is straight, get someone to help or hold it with the handle bar against a wall so it cant overbalance

http://www.british-customs.com/
if they don't have i'll eat my shoe they have never let me down on parts for triumph, the only thing that they couldn't get me was vavle guides for a 66 bonnie custom i'm biulding for a customer at our shop. However they did know who to call to get them.
Ride safe
Mark
C.C. Motorsports

Make sure carbs are getting enough fuel, and that the float levels are correctly set, also check the ignition timing

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c

I have a 2004 955i and mine is on the left hand side of the front axle. It has a jacketed lead coming from it up through the handlebar yokes and then goes through the fairing to the right hand side of the fuel tank. Hope this helps.