Please whats the belt number or serial number for 2006 Hyundai Tucson v6? My own got cut n got lost cant find it or know d number to get a new 1. I also need the diagram to fix new belt.

It is here and note they are INCH pounds not ft lbs.

https://www.google.com/search?q=2006+Hyundai+Tucson+V6+torque+specs+for+valve+cover

Valve Cover Bolts Torque Spec

Hyundai Forums
https://www.hyundai-forums.com > threads > valve-cov...
Jun 6, 2016 - If the specs are 72 - 84 inch pounds, i always use the lowest value, especially in aluminum. If you use a new gasket and clean the mating ...

Replacing Valve Cover Gasket - Hyundai Forums
Dec 9, 2007
Valve Cover Replacement Specifications - Hyundai Forums
Aug 24, 2012
torque specs ' Hyundai Forums
May 11, 2015
Valve Cover Torque ' Hyundai Forums
May 21, 2023
More results from www.hyundai-forums.com

..

The location of the number 1 cylinder in a 2008 Hyundai Tucson is determined by the engine type and layout.
Hyundai Tucson 2008 models comes with 2 different engine types :

• 2.0L I4 engine
• 2.7L V6 engine

In both engines, the firing order is 1-3-4-2, and the cylinder layout is inline or straight.
The cylinder layout of the 2008 Hyundai Tucson with 2.0L I4 engine is inline 4-cylinder, meaning that the cylinders are arranged in a line, one after the other. In this configuration, the number 1 cylinder is typically located at the front of the engine, on the driver's side.
The cylinder layout of the 2008 Hyundai Tucson with 2.7L V6 engine is V6 engine, meaning that the cylinders are arranged in a "V" shape. In this configuration, the number 1 cylinder is typically located at the front of the engine, on the driver's side, and it's the first cylinder on the left bank.

Hi,

Please check the heater motor and also the thermostat. If those don't work, then this can also lead to your ac/heating system to malfunction as well.

Please use autozone to get a free diagnostic run on your car to get a list of errors. Then, they can tell you which errors are relevant to your ac/heating issue.

Thank you.

call the company they know better then everyone else and they are free as well

Is this diagram of any help?



Try the link below

Ultimate Timing Belt Diy Guide For 2 7l V6 Hyundai Forums Hyundai Forum

Cut the bolt and fit new bolt the other way round

pending type of driving you do . Highway ,city etc it should average around 360 to 380km

Where is the mechanic that did the repairs? Check the wiring for the cam sensor?

Here is the serpentine belt routing diagram for the 2006 Hyundai Tucson 2.7l V6:0


I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

On the 2L (4 cylinder) engine it is recommended to inspect the belt at 37200 miles and replace the belt at 56000 miles.

On the 2.7L (V6) it is recommended to replace the belt at 60000 miles.

And, both these engines are interference engines (meaning if they break a belt, pistons hit and bend valves) which is not a pretty sight...