Plug gap 05 Toyota 4.7? - Toyota Cars & Trucks

There is a little controversy about this. Searching the web, the best explanation I see is:

he 0.061-0.068 gap comes from the Ford OEM Service DVDs for 2003, 04 & 05, for the 4.0L Explorer, Explorer Sport-Trac, Mountaineer & Ranger, originally equipped with the Motorcraft AGSF22PM plug. Interestingly, in 2005, the Mustang started using the same 4.0L engine. In that application, the engine was equipped with the AGSF24N plug (a hotter plug). The gap on the DVD is shown as 0.052-0.056 in.

Through 2002, all 4.0L SOHC plugs, according to the Ford DVDs, are gapped at 0.052-0.056, using AGSF22PP plugs as replacement plugs.

The 4.0L SOHC is a waste spark engine, which uses slightly different plugs on the left & right banks.

Replacement plugs are usually double platinum, suffixed PP so they can be
used on both banks.

On the 2006 and later Ford DVDs, all 4.0L SOHC plugs are gapped at
0.052-0.056 in.

On the Ford OEM parts site, the AGSF22PM plug isn't listed. The replacement
plug for 2003-05 4.0L engines is the SP400, which is shown as having a gap
of 0.052-0.056 in.

The sites for Autolite, Champion and Bosch all list replacement plugs, for
those years as having a gap of 0.054 in.

Bottom line, it looks like the original plugs in the 2003-05 engines, except
for the 2005 Mustang, were gapped at 0.061-0.068 in. Replacement plugs,
regardless of manufacturer, are gapped at 0.052-0.056 (0.054), regardless of
electrode type (iron, copper, platinum, double platinum, or iridium.

1.1 mm
but there are differences between brands and types ( platinium cq irridium)

http://www.easycarparts.nl/toyota/corolla-e11-sedan-1997-2001/1-3-12_v-2e-05-1997-10-2001/motor/ontsteking

If you are using iridium plugs or bosch supper 4 ytou don't usually need to mess with the gap. Standard plugs should be set at 0.032"

Where do you put the compact disks? There is a gap on the center of the dashboard with the letters CD right next to it. Just slide them in when the vehical is on. Hope this helps! Please rate 4 thumbs up!

I believe that the gap you need is .035 . My personal vehicle is an '88, and i set my plug gap at .035. This has worked fine for 10 years. Also, the plugs that work the best are nippondenso u-groove. My mileage and power seem to be the best with these plugs. (this is for the 2.4 litre 4 cylinder, but i believe the gap also works for the v-6.)

It is app .044, but most of the new plugs come pre-gapped, you don't have to touch them. Some of them don't have anything to gap. Just a point and a rim. Hope this helps.

It is .044 don't forget some plugs dont get gapped. They come pregapped.

SPARK PLUG .044 GAP

The correct spark plug gap for the 1.5 litre engine is .032"