Question about 1988 Yamaha FZR 1000
I have a recently brought a 1988 yamaha fzr 1000 genesis
as soon as i turn the ignition on the fan starts running
The fan is driven by a temperature switch on the manifold on the right of your bike. Remove the switch unit and test continuity with a multimeter. If you find no resistance when it is cold that means the unit is faulty and needs to be replaced. If there is no continuity then submerge the unit in boiling water. remember your bike normally only starts its fan when the engine water gets to about 95deg, which is when the circuit should close, then test the continuity again. If this switch is fine then you have a short somewhere that is closing the circuit to allow the fan to operate.
Good luck if this is the case as it is normally difficult to track
Posted on Sep 17, 2009
This is an ignition problem, (probability of short circuit in the ignition head wiring). U may have to repair this.
Posted on Jul 13, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 10, 2014 | 1988 Yamaha FZR 1000
Sep 26, 2013 | 1988 Yamaha FZR 1000
Sep 23, 2013 | 1988 Yamaha FZR 1000
Mar 05, 2013 | Yamaha FZ6 Fazer Motorcycles
Jan 22, 2013 | 1987 Yamaha FZR 1000
Aug 07, 2012 | 1994 Yamaha FZR 1000
Jul 08, 2012 | 1988 Yamaha FZR 1000
Apr 06, 2012 | 1987 Yamaha FZR 1000
Jan 30, 2012 | 1993 Yamaha FZR 1000
Apr 02, 2009 | 1988 Yamaha FZR 1000
203 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: