Do you have valve lash specs? - Caravan Dodge Cars & Trucks

no year truck told or engine true name, 4HK1/?
cam lobes not pushing valve spring stem
set the lash to spec. now, then,.
turn the crank by hand put the LOBEs on he heals. of the cam to valve and set latch. repeat on all valves.
all 4 solid lifter engines the same way, using eyeballs. on lobes
there is a way to cheat but most noobs get lost doing that.
this is day1 covered in all ASE classes (engine day)
hands on,demo'd'

no question asked at all
how to?
what is? spec on lash, say lash or say valve gap adjustment.
Isuzu NQR 500 is a short to medium hauler?????
Diesel? 5.1L?
if no cam viable rockers do same thing, moved
see each one , TDC , both valves closed.
4hk1 engine?
first google hit is here on lash (revised)

http://www.engineprofessional.com/TB/TB010516-1.pdf

shows 24 thou on all 16v
best is to by the shop manual not use internet rumors
or search by real names like 4Hj1 engines, learn true engine name and search'

http://www.calvinlashes.com/customized-packaging-mink-lashes/customized packaging mink lashes Customized Packaging Mink Lashes-Calvin Lashes Wholesale hot sales for hot fashionable best customized packaging mink lashes.Our best soft style customized packaging mink lashes is natural,soft with fast delivery. Our best soft style customized packaging mink lashes Price cheap and Directly sell from Our manufacturer,Big discount and Free sample Available.
http://www.calvinlashes.com/customized-packaging-mink-lashes

Suzuki DR400S - Motorcycle Specs

www.motorcyclespecs.co.za/model/suzu/suzuki_dr400s%2080.ht
1980. Engine. Air cooled, four stroke, single cylinder, SOHC, 2 valves per cylinder ....Valve adjustment can be done without a feeler gauge and the CDI has ..

Dr400 valve adjustment 1 - YouTube

? 2:08
www.youtube.com/watch?v=BH-KFrpwo3w
Nov 19, 2010 - Uploaded by obtrailriders
Dr400 valve adjustment 1. ... Suzuki DRZ 400 Valves clearance check \ sprawdzanie luzu zaworowego PART 2 ...

both answers above are wrong. the 1984 2.8 ford cologne engine had solid lifters and requires valve lash settings of ,014 intake and .016 exhaust.

There is no valve lash setting. If you remove the cams, make sure the valves and the lifter cups stay in the same position.

its always best to get a book with the specs because almost every engine has lash adjustment. allthough not alway just adjustable. what i meen is that some engines, fords did it , u have to change the pushrod. on overhead cam engines u had to change lifters theres a lot of ways to do it but u should probly get the specs.

VALVE ADJUSTMENTS All gasoline and diesel engines in this guide use hydraulic valve lifters, which require no periodic maintenance or adjustment. However, in the event of cylinder head removal or any operation that requires disturbing or removing the rocker arms, the rocker arms must be adjusted in order to position the pushrods to allow the hydraulic lifters to maintain zero lash. Refer to the valve lash adjustment procedure under Rocker Arms, earlier in this Section.

tiburon uses hydrolic lash adjusters there are no valve lash adjusting If you hearing a pecking sound on the top of the mtr try some oil additive or replace the hydrolic lash adjusters

Valve stem-to-valve rocker arm clearance should be within specification with the valve tappet completely collapsed.
The collapsed valve tappet gap, when the cylinder head is on base circle, should be as follows:

• Minimum: 0mm (0.000 inch)
• Nominal: 2.2mm (0.087 inch)
• Maximum: 4.5mm (0.177 inch)

• INTAKE VALVES: 0.003-0.005 in. (0.08-0.12mm)
  
• EXHAUST VALVES: 0.006-0.008 in. (0.16-0.20mm)
  
• 
  
• PLEASE NOTE:
  
• THESE SPECS ARE FOR A 4 CYLINDER, THE V6 HAS HYDRAULIC VALVE FOLLOWERS DOES NOT REQUIRE ADJUSTMENT
  
• ALL ADJUSTMENTS ARE ON A COLD ENGINE